xen2.0.3 and aic79xx

xen2.0.3 and aic79xx

[Frank Fischer]

Has anyone expirienced problems with the aic79xx controller 
and xen
2.0.3 (liinux-2.6.10)?
I have got FC3 running and compiled xen-2.0.3 from the 
sources. The
compile ssems to work fine  but after rebooting the xen0 
domain the
server stops during boot at the aic79xx message -  no 
harddisks are
recognized.

I've searched through the mailinglist up and down, asked 
google but
didn't find any hint.
I have double checked termination of the scsi-bus - despite 
the fact
that everything is working with a plain FC3 (whithout xen) 
and so it
does with a plain debian sarge installation on the same server.

Any hints?

Beste regards,

Frank



-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl

Re: xen2.0.3 and aic79xx

[Keir Fraser]

When you boot plain Linux, do you get messages about 
"ACPI: PCI Interrupt <blah blah>"
just before the aic79xx banner message?

 -- Keir

> Has anyone expirienced problems with the aic79xx controller 
> and xen
> 2.0.3 (liinux-2.6.10)?
> I have got FC3 running and compiled xen-2.0.3 from the 
> sources. The
> compile ssems to work fine  but after rebooting the xen0 
> domain the
> server stops during boot at the aic79xx message -  no 
> harddisks are
> recognized.
> 
> I've searched through the mailinglist up and down, asked 
> google but
> didn't find any hint.
> I have double checked termination of the scsi-bus - despite 
> the fact
> that everything is working with a plain FC3 (whithout xen) 
> and so it
> does with a plain debian sarge installation on the same server.
> 
> Any hints?
> 
> Beste regards,
> 
> Frank
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> Tool for open source databases. Create drag-&-drop reports. Save time
> by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> Download a FREE copy at http://www.intelliview.com/go/osdn_nl
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xen-devel
> 



-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl

Re: xen2.0.3 and aic79xx

[Keir Fraser]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 4840 bytes --]


Not good news. We need to run a full ACPI interpreter to be able to
set up IRQ routing on your chipset, but we don't yet have full ACPI
support. We intend to get this sorted out in the next month or so: it
is a very high priority on our todo list.

We had exactly the same problem as you with our latest test machine --
no chance that current Xen will work on it, and it seems the hardware
is bleeding edge even for vanilla Linux (we get loads of logging from
the kernel which is just lines of hex numbers, so presumably using a
code path with debugging code still in it).

You might get the system working without the SCSI controller
configured, but that is probably not much use to you. :-)

 -- Keir

> Exactly, I get two slightliy different messages like ACPI: PCI Interrupt 
> blah blah -> GSI (level,low) -> IRQ 9 before the aic79xx message.
> 
> Do you have got an idea what's going wrong?
> 
> 
> Keir Fraser wrote:
> 
> >When you boot plain Linux, do you get messages about 
> >"ACPI: PCI Interrupt <blah blah>"
> >just before the aic79xx banner message?
> >
> > -- Keir
> >
> >  
> >
> >>Has anyone expirienced problems with the aic79xx controller 
> >>and xen
> >>2.0.3 (liinux-2.6.10)?
> >>I have got FC3 running and compiled xen-2.0.3 from the 
> >>sources. The
> >>compile ssems to work fine  but after rebooting the xen0 
> >>domain the
> >>server stops during boot at the aic79xx message -  no 
> >>harddisks are
> >>recognized.
> >>
> >>I've searched through the mailinglist up and down, asked 
> >>google but
> >>didn't find any hint.
> >>I have double checked termination of the scsi-bus - despite 
> >>the fact
> >>that everything is working with a plain FC3 (whithout xen) 
> >>and so it
> >>does with a plain debian sarge installation on the same server.
> >>
> >>Any hints?
> >>
> >>Beste regards,
> >>
> >>Frank
> >>
> >>
> >>
> >>-------------------------------------------------------
> >>This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> >>Tool for open source databases. Create drag-&-drop reports. Save time
> >>by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> >>Download a FREE copy at http://www.intelliview.com/go/osdn_nl
> >>_______________________________________________
> >>Xen-devel mailing list
> >>Xen-devel@lists.sourceforge.net
> >>https://lists.sourceforge.net/lists/listinfo/xen-devel
> >>
> >>    
> >>
> >
> >
> >  
> >
> 
> -- 
> Intertech, ein Geschäftsbereich von
> Frank Fischer Hard- & Software
> Wilhelm-von-Capitaine-Str. 18
> 50858 Köln
> Fon: +49 221 13064990
> Fax: +49 221 13064999
> E-Mail: fischer@intertech.de
> Web: http://www.intertech.de
> 
\x1f -=- MIME -=- \x1f\f

Exactly, I get two slightliy different messages like ACPI: PCI Interrupt=20
blah blah -> GSI (level,low) -> IRQ 9 before the aic79xx message.

Do you have got an idea what's going wrong?


Keir Fraser wrote:

>When you boot plain Linux, do you get messages about=20
>"ACPI: PCI Interrupt <blah blah>"
>just before the aic79xx banner message?
>
> -- Keir
>
> =20
>
>>Has anyone expirienced problems with the aic79xx controller=20
>>and xen
>>2.0.3 (liinux-2.6.10)?
>>I have got FC3 running and compiled xen-2.0.3 from the=20
>>sources. The
>>compile ssems to work fine  but after rebooting the xen0=20
>>domain the
>>server stops during boot at the aic79xx message -  no=20
>>harddisks are
>>recognized.
>>
>>I've searched through the mailinglist up and down, asked=20
>>google but
>>didn't find any hint.
>>I have double checked termination of the scsi-bus - despite=20
>>the fact
>>that everything is working with a plain FC3 (whithout xen)=20
>>and so it
>>does with a plain debian sarge installation on the same server.
>>
>>Any hints?
>>
>>Beste regards,
>>
>>Frank
>>
>>
>>
>>-------------------------------------------------------
>>This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
>>Tool for open source databases. Create drag-&-drop reports. Save time
>>by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
>>Download a FREE copy at http://www.intelliview.com/go/osdn_nl
>>_______________________________________________
>>Xen-devel mailing list
>>Xen-devel@lists.sourceforge.net
>>https://lists.sourceforge.net/lists/listinfo/xen-devel
>>
>>   =20
>>
>
>
> =20
>

--=20
Intertech, ein Gesch=E4ftsbereich von
Frank Fischer Hard- & Software
Wilhelm-von-Capitaine-Str. 18
50858 K=F6ln
Fon: +49 221 13064990
Fax: +49 221 13064999
E-Mail: fischer@intertech.de
Web: http://www.intertech.de




-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl

xen2.0.3 and aic79xx

[Frank Fischer]

Has anyone expirienced problems with the aic79xx controller and xen 
2.0.3 (liinux-2.6.10)?
I have got FC3 running and compiled xen-2.0.3 from the sources. The 
compile ssems to work fine  but after rebooting the xen0 domain the 
server stops during boot at the aic79xx message -  no harddisks are 
recognized.

I've searched through the mailinglist up and down, asked google but 
didn't find any hint.
I have double checked termination of the scsi-bus - despite the fact 
that everything is working with a plain FC3 (whithout xen) and so it 
does with a plain debian sarge installation on the same server.

Any hints?

Beste regards,

Frank


-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl