* [uml-devel] [patch] Make User Mode Linux compile in 2.6.11-rc3
@ 2005-02-05 15:51 ` Rob Landley
0 siblings, 0 replies; 6+ messages in thread
From: Rob Landley @ 2005-02-05 15:51 UTC (permalink / raw)
To: linux-kernel, user-mode-linux-devel; +Cc: torvalds, Andrew Morton, Jeff Dike
As of yesterday afternoon, the UML build still breaks in sys_call_table.c,
here's the patch I submitted earlier (which got me past the break when I
tried it). Last week, this produced what seemed like a working UML.
Now there's a second break in mm/memory.c: the move to four level page
tables conflicts with a stub in our headers. Not quite sure how to fix that.
Jeff?
(Yeah, I know Andrew's tree works. But wouldn't it be nice if the kernel.org
tree to worked too, before 2.6.11 release.)
Rob
---------- Forwarded Message ----------
Subject: [uml-devel] [patch] Make User Mode Linux compile in 2.6.11-rc2-bk6.
Date: Saturday 29 January 2005 05:51 am
From: Rob Landley <rob@landley.net>
To: linux-kernel@vger.kernel.org, user-mode-linux-devel@lists.sourceforge.net
User Mode Linux doesn't compile in 2.6.11-rc2-bk6. Here's the change I
made to sys_call_table.c to make it compile. (I ran the result and brought
up a shell.)
We're really close to finally having a usable UML kernel in mainline.
2.6.9's ARCH=um built but was very unstable, 2.6.10 didn't even build
for me, but 2.6.11-rc1-mm2 builds fine unmodified, and ran my tests
correctly to completion.
Here's the patch. Nothing fancy, it simply removes or stubs out all the
syscalls the compiler complains about.
Rob
Signed-off-by: Rob Landley <rob@landley.net>
--- linux-2.6.10/arch/um/kernel/sys_call_table.c 2005-01-28
21:20:38.000000000 -0600 +++
linux-2.6.10-um/arch/um/kernel/sys_call_table.c 2005-01-28
21:40:30.735892144 -0600 @@ -20,7 +20,7 @@
#define NFSSERVCTL sys_ni_syscall
#endif
-#define LAST_GENERIC_SYSCALL __NR_vperfctr_read
+#define LAST_GENERIC_SYSCALL (NR_syscalls-1)
#if LAST_GENERIC_SYSCALL > LAST_ARCH_SYSCALL
#define LAST_SYSCALL LAST_GENERIC_SYSCALL
@@ -52,13 +52,7 @@
extern syscall_handler_t sys_mbind;
extern syscall_handler_t sys_get_mempolicy;
extern syscall_handler_t sys_set_mempolicy;
-extern syscall_handler_t sys_sys_kexec_load;
extern syscall_handler_t sys_sys_setaltroot;
-extern syscall_handler_t sys_vperfctr_open;
-extern syscall_handler_t sys_vperfctr_control;
-extern syscall_handler_t sys_vperfctr_unlink;
-extern syscall_handler_t sys_vperfctr_iresume;
-extern syscall_handler_t sys_vperfctr_read;
syscall_handler_t *sys_call_table[] = {
[ __NR_restart_syscall ] = (syscall_handler_t *) sys_restart_syscall,
@@ -273,7 +267,7 @@
[ __NR_mq_timedreceive ] = (syscall_handler_t *) sys_mq_timedreceive,
[ __NR_mq_notify ] = (syscall_handler_t *) sys_mq_notify,
[ __NR_mq_getsetattr ] = (syscall_handler_t *) sys_mq_getsetattr,
- [ __NR_sys_kexec_load ] = (syscall_handler_t *) sys_kexec_load,
+ [ __NR_sys_kexec_load ] = (syscall_handler_t *) sys_ni_syscall,
[ __NR_waitid ] = (syscall_handler_t *) sys_waitid,
#if 0
[ __NR_sys_setaltroot ] = (syscall_handler_t *) sys_sys_setaltroot,
@@ -281,11 +275,6 @@
[ __NR_add_key ] = (syscall_handler_t *) sys_add_key,
[ __NR_request_key ] = (syscall_handler_t *) sys_request_key,
[ __NR_keyctl ] = (syscall_handler_t *) sys_keyctl,
- [ __NR_vperfctr_open ] = (syscall_handler_t *) sys_vperfctr_open,
- [ __NR_vperfctr_control ] = (syscall_handler_t *) sys_vperfctr_control,
- [ __NR_vperfctr_unlink ] = (syscall_handler_t *) sys_vperfctr_unlink,
- [ __NR_vperfctr_iresume ] = (syscall_handler_t *) sys_vperfctr_iresume,
- [ __NR_vperfctr_read ] = (syscall_handler_t *) sys_vperfctr_read,
ARCH_SYSCALLS
[ LAST_SYSCALL + 1 ... NR_syscalls ] =
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
^ permalink raw reply [flat|nested] 6+ messages in thread* [patch] Make User Mode Linux compile in 2.6.11-rc3
@ 2005-02-05 15:51 ` Rob Landley
0 siblings, 0 replies; 6+ messages in thread
From: Rob Landley @ 2005-02-05 15:51 UTC (permalink / raw)
To: linux-kernel, user-mode-linux-devel; +Cc: torvalds, Andrew Morton, Jeff Dike
As of yesterday afternoon, the UML build still breaks in sys_call_table.c,
here's the patch I submitted earlier (which got me past the break when I
tried it). Last week, this produced what seemed like a working UML.
Now there's a second break in mm/memory.c: the move to four level page
tables conflicts with a stub in our headers. Not quite sure how to fix that.
Jeff?
(Yeah, I know Andrew's tree works. But wouldn't it be nice if the kernel.org
tree to worked too, before 2.6.11 release.)
Rob
---------- Forwarded Message ----------
Subject: [uml-devel] [patch] Make User Mode Linux compile in 2.6.11-rc2-bk6.
Date: Saturday 29 January 2005 05:51 am
From: Rob Landley <rob@landley.net>
To: linux-kernel@vger.kernel.org, user-mode-linux-devel@lists.sourceforge.net
User Mode Linux doesn't compile in 2.6.11-rc2-bk6. Here's the change I
made to sys_call_table.c to make it compile. (I ran the result and brought
up a shell.)
We're really close to finally having a usable UML kernel in mainline.
2.6.9's ARCH=um built but was very unstable, 2.6.10 didn't even build
for me, but 2.6.11-rc1-mm2 builds fine unmodified, and ran my tests
correctly to completion.
Here's the patch. Nothing fancy, it simply removes or stubs out all the
syscalls the compiler complains about.
Rob
Signed-off-by: Rob Landley <rob@landley.net>
--- linux-2.6.10/arch/um/kernel/sys_call_table.c 2005-01-28
21:20:38.000000000 -0600 +++
linux-2.6.10-um/arch/um/kernel/sys_call_table.c 2005-01-28
21:40:30.735892144 -0600 @@ -20,7 +20,7 @@
#define NFSSERVCTL sys_ni_syscall
#endif
-#define LAST_GENERIC_SYSCALL __NR_vperfctr_read
+#define LAST_GENERIC_SYSCALL (NR_syscalls-1)
#if LAST_GENERIC_SYSCALL > LAST_ARCH_SYSCALL
#define LAST_SYSCALL LAST_GENERIC_SYSCALL
@@ -52,13 +52,7 @@
extern syscall_handler_t sys_mbind;
extern syscall_handler_t sys_get_mempolicy;
extern syscall_handler_t sys_set_mempolicy;
-extern syscall_handler_t sys_sys_kexec_load;
extern syscall_handler_t sys_sys_setaltroot;
-extern syscall_handler_t sys_vperfctr_open;
-extern syscall_handler_t sys_vperfctr_control;
-extern syscall_handler_t sys_vperfctr_unlink;
-extern syscall_handler_t sys_vperfctr_iresume;
-extern syscall_handler_t sys_vperfctr_read;
syscall_handler_t *sys_call_table[] = {
[ __NR_restart_syscall ] = (syscall_handler_t *) sys_restart_syscall,
@@ -273,7 +267,7 @@
[ __NR_mq_timedreceive ] = (syscall_handler_t *) sys_mq_timedreceive,
[ __NR_mq_notify ] = (syscall_handler_t *) sys_mq_notify,
[ __NR_mq_getsetattr ] = (syscall_handler_t *) sys_mq_getsetattr,
- [ __NR_sys_kexec_load ] = (syscall_handler_t *) sys_kexec_load,
+ [ __NR_sys_kexec_load ] = (syscall_handler_t *) sys_ni_syscall,
[ __NR_waitid ] = (syscall_handler_t *) sys_waitid,
#if 0
[ __NR_sys_setaltroot ] = (syscall_handler_t *) sys_sys_setaltroot,
@@ -281,11 +275,6 @@
[ __NR_add_key ] = (syscall_handler_t *) sys_add_key,
[ __NR_request_key ] = (syscall_handler_t *) sys_request_key,
[ __NR_keyctl ] = (syscall_handler_t *) sys_keyctl,
- [ __NR_vperfctr_open ] = (syscall_handler_t *) sys_vperfctr_open,
- [ __NR_vperfctr_control ] = (syscall_handler_t *) sys_vperfctr_control,
- [ __NR_vperfctr_unlink ] = (syscall_handler_t *) sys_vperfctr_unlink,
- [ __NR_vperfctr_iresume ] = (syscall_handler_t *) sys_vperfctr_iresume,
- [ __NR_vperfctr_read ] = (syscall_handler_t *) sys_vperfctr_read,
ARCH_SYSCALLS
[ LAST_SYSCALL + 1 ... NR_syscalls ] =
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [uml-devel] [patch] Make User Mode Linux compile in 2.6.11-rc3
2005-02-05 15:51 ` Rob Landley
@ 2005-02-05 18:00 ` Frank Sorenson
-1 siblings, 0 replies; 6+ messages in thread
From: Frank Sorenson @ 2005-02-05 18:00 UTC (permalink / raw)
To: Rob Landley
Cc: linux-kernel, user-mode-linux-devel, torvalds, Andrew Morton,
Jeff Dike
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Rob Landley wrote:
| As of yesterday afternoon, the UML build still breaks in
sys_call_table.c,
| here's the patch I submitted earlier (which got me past the break when I
| tried it). Last week, this produced what seemed like a working UML.
|
| Now there's a second break in mm/memory.c: the move to four level page
| tables conflicts with a stub in our headers. Not quite sure how to
fix that.
| Jeff?
|
| (Yeah, I know Andrew's tree works. But wouldn't it be nice if the
kernel.org
| tree to worked too, before 2.6.11 release.)
This patch for sys_call_table.c was merged into the main tree in this
changeset:
http://linux.bkbits.net:8080/linux-2.5/cset@1.2080?nav=index.html|ChangeSet@-2d
The patch fixes both the sys_call_table and the pud_alloc breakage, and
as of 2.6.11-rc3-bk2, the main tree compiles again for UML.
Andrew's tree, however, (at least 2.6.11-rc3-mm1) requires the patch I
sent out yesterday in the message titled "Fix compilation of UML after
the stack-randomization patches."
Frank
- --
Frank Sorenson - KD7TZK
Systems Manager, Computer Science Department
Brigham Young University
frank@tuxrocks.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFCBQlRaI0dwg4A47wRAjJ8AJ9CKD/aXaz1TS9QfOO11vcsv+57BACg1CdJ
GR0ukCKAabFtJs5rVsPItGg=
=h/on
-----END PGP SIGNATURE-----
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [uml-devel] [patch] Make User Mode Linux compile in 2.6.11-rc3
@ 2005-02-05 18:00 ` Frank Sorenson
0 siblings, 0 replies; 6+ messages in thread
From: Frank Sorenson @ 2005-02-05 18:00 UTC (permalink / raw)
To: Rob Landley
Cc: linux-kernel, user-mode-linux-devel, torvalds, Andrew Morton,
Jeff Dike
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Rob Landley wrote:
| As of yesterday afternoon, the UML build still breaks in
sys_call_table.c,
| here's the patch I submitted earlier (which got me past the break when I
| tried it). Last week, this produced what seemed like a working UML.
|
| Now there's a second break in mm/memory.c: the move to four level page
| tables conflicts with a stub in our headers. Not quite sure how to
fix that.
| Jeff?
|
| (Yeah, I know Andrew's tree works. But wouldn't it be nice if the
kernel.org
| tree to worked too, before 2.6.11 release.)
This patch for sys_call_table.c was merged into the main tree in this
changeset:
http://linux.bkbits.net:8080/linux-2.5/cset@1.2080?nav=index.html|ChangeSet@-2d
The patch fixes both the sys_call_table and the pud_alloc breakage, and
as of 2.6.11-rc3-bk2, the main tree compiles again for UML.
Andrew's tree, however, (at least 2.6.11-rc3-mm1) requires the patch I
sent out yesterday in the message titled "Fix compilation of UML after
the stack-randomization patches."
Frank
- --
Frank Sorenson - KD7TZK
Systems Manager, Computer Science Department
Brigham Young University
frank@tuxrocks.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFCBQlRaI0dwg4A47wRAjJ8AJ9CKD/aXaz1TS9QfOO11vcsv+57BACg1CdJ
GR0ukCKAabFtJs5rVsPItGg=
=h/on
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [uml-devel] [patch] Make User Mode Linux compile in 2.6.11-rc3
2005-02-05 18:00 ` Frank Sorenson
@ 2005-02-06 17:00 ` Rob Landley
-1 siblings, 0 replies; 6+ messages in thread
From: Rob Landley @ 2005-02-06 17:00 UTC (permalink / raw)
To: Frank Sorenson
Cc: linux-kernel, user-mode-linux-devel, Andrew Morton, Jeff Dike
On Saturday 05 February 2005 01:00 pm, Frank Sorenson wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Rob Landley wrote:
> | As of yesterday afternoon, the UML build still breaks in
> | sys_call_table.c,
...
> This patch for sys_call_table.c was merged into the main tree in this
> changeset:
> http://linux.bkbits.net:8080/linux-2.5/cset@1.2080?nav=index.html|ChangeSet
>@-2d
>
> The patch fixes both the sys_call_table and the pud_alloc breakage, and
> as of 2.6.11-rc3-bk2, the main tree compiles again for UML.
Verified. 2.6.11-rc3-bk2 does indeed build, and the result is chugging
through my big compile script. It seems to be working fine, although ye olde
display glitch is still there:
binutils-2.14/ld/testsuite/ld-sparc/tlssunbin64.rd
binutils-2.14/ld/testsuite/lde/ld-/ld-sld-spd-spa-sparsparcparc/arc/trc/tlc/tls/tlsstlssulssunssunbsunbiunbinnbin6bin64in64.n64.s64.s4.s.ss
binubinutinutinutilutilstils-ils-2ls-2.s-2.1-2.142.14/.14/l14/ld4/ld//ld/tld/ted/tes/testtestsestsustsuitsuitsuiteuite/ite/lte/lde/ld-/ld-sld-spd-spa-sparsparcparc/tlssunbin64.sd
binutils-2.14/ld/testsuite/ld-sparc/tlssunbin64.td
But that's a purely cosmetic bug.
Thanks,
Rob
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [uml-devel] [patch] Make User Mode Linux compile in 2.6.11-rc3
@ 2005-02-06 17:00 ` Rob Landley
0 siblings, 0 replies; 6+ messages in thread
From: Rob Landley @ 2005-02-06 17:00 UTC (permalink / raw)
To: Frank Sorenson
Cc: linux-kernel, user-mode-linux-devel, Andrew Morton, Jeff Dike
On Saturday 05 February 2005 01:00 pm, Frank Sorenson wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Rob Landley wrote:
> | As of yesterday afternoon, the UML build still breaks in
> | sys_call_table.c,
...
> This patch for sys_call_table.c was merged into the main tree in this
> changeset:
> http://linux.bkbits.net:8080/linux-2.5/cset@1.2080?nav=index.html|ChangeSet
>@-2d
>
> The patch fixes both the sys_call_table and the pud_alloc breakage, and
> as of 2.6.11-rc3-bk2, the main tree compiles again for UML.
Verified. 2.6.11-rc3-bk2 does indeed build, and the result is chugging
through my big compile script. It seems to be working fine, although ye olde
display glitch is still there:
binutils-2.14/ld/testsuite/ld-sparc/tlssunbin64.rd
binutils-2.14/ld/testsuite/lde/ld-/ld-sld-spd-spa-sparsparcparc/arc/trc/tlc/tls/tlsstlssulssunssunbsunbiunbinnbin6bin64in64.n64.s64.s4.s.ss
binubinutinutinutilutilstils-ils-2ls-2.s-2.1-2.142.14/.14/l14/ld4/ld//ld/tld/ted/tes/testtestsestsustsuitsuitsuiteuite/ite/lte/lde/ld-/ld-sld-spd-spa-sparsparcparc/tlssunbin64.sd
binutils-2.14/ld/testsuite/ld-sparc/tlssunbin64.td
But that's a purely cosmetic bug.
Thanks,
Rob
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2005-02-06 18:03 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-02-05 15:51 [uml-devel] [patch] Make User Mode Linux compile in 2.6.11-rc3 Rob Landley
2005-02-05 15:51 ` Rob Landley
2005-02-05 18:00 ` [uml-devel] " Frank Sorenson
2005-02-05 18:00 ` Frank Sorenson
2005-02-06 17:00 ` Rob Landley
2005-02-06 17:00 ` Rob Landley
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.