From: David Vrabel <dvrabel@arcom.com>
To: linux-fbdev-devel@lists.sourceforge.net
Subject: [patch] Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/4)
Date: Tue, 15 Feb 2005 10:53:09 +0000 [thread overview]
Message-ID: <4211D495.3080506@arcom.com> (raw)
In-Reply-To: <4211D2DF.2070302@arcom.com>
[-- Attachment #1: Type: text/plain, Size: 224 bytes --]
Make all framebuffer drivers (where appropriate) select FB_CFB_FILLRECT,
FB_CFB_COPYAREA, and/or FB_CFB_IMAGEBLIT instead of specifying the
objects in the Makefile directly.
Signed-off-by: David Vrabel <dvrabel@arcom.com>
[-- Attachment #2: fb-kbuild-use-FB_CFB_xxx --]
[-- Type: text/plain, Size: 26387 bytes --]
%status
pending
%patch
Index: linux-2.6-i386/drivers/video/Kconfig
===================================================================
--- linux-2.6-i386.orig/drivers/video/Kconfig 2005-02-15 10:12:37.657581067 +0000
+++ linux-2.6-i386/drivers/video/Kconfig 2005-02-15 10:12:46.078098585 +0000
@@ -97,6 +97,9 @@
config FB_CIRRUS
tristate "Cirrus Logic support"
depends on FB && (ZORRO || PCI)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
---help---
This enables support for Cirrus Logic GD542x/543x based boards on
Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
@@ -112,6 +115,9 @@
config FB_PM2
tristate "Permedia2 support"
depends on FB && ((AMIGA && BROKEN) || PCI)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the Permedia2 AGP frame
buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
@@ -127,6 +133,9 @@
config FB_ARMCLCD
tristate "ARM PrimeCell PL110 support"
depends on FB && ARM && ARM_AMBA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This framebuffer device driver is for the ARM PrimeCell PL110
Colour LCD controller. ARM PrimeCells provide the building
@@ -140,6 +149,9 @@
config FB_ACORN
bool "Acorn VIDC support"
depends on FB && ARM && ARCH_ACORN
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the Acorn VIDC graphics
hardware found in Acorn RISC PCs and other ARM-based machines. If
@@ -148,10 +160,16 @@
config FB_CLPS711X
bool "CLPS711X LCD support"
depends on FB && ARM && ARCH_CLPS711X
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
config FB_SA1100
bool "SA-1100 LCD support"
depends on FB && ARM && ARCH_SA1100
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is a framebuffer device for the SA-1100 LCD Controller.
See <http://www.linux-fbdev.org/> for information on framebuffer
@@ -163,6 +181,9 @@
config FB_CYBER2000
tristate "CyberPro 2000/2010/5000 support"
depends on FB && PCI && (BROKEN || !SPARC64)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This enables support for the Integraphics CyberPro 20x0 and 5000
VGA chips used in the Rebel.com Netwinder and other machines.
@@ -173,11 +194,16 @@
bool
depends on FB && APOLLO
default y
+ select FB_CFB_FILLRECT
+ select FB_CFB_IMAGEBLIT
config FB_Q40
bool
depends on FB && Q40
default y
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
config FB_AMIGA
tristate "Amiga native chipset support"
@@ -218,6 +244,9 @@
config FB_CYBER
tristate "Amiga CyberVision 64 support"
depends on FB && ZORRO && BROKEN
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This enables support for the Cybervision 64 graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
@@ -229,6 +258,9 @@
config FB_VIRGE
bool "Amiga CyberVision 64/3D support "
depends on FB && ZORRO && BROKEN
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This enables support for the Cybervision 64/3D graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
@@ -248,6 +280,9 @@
config FB_FM2
bool "Amiga FrameMaster II/Rainbow II support"
depends on FB && ZORRO
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the Amiga FrameMaster
card from BSC (exhibited 1992 but not shipped as a CBM product).
@@ -262,6 +297,9 @@
config FB_OF
bool "Open Firmware frame buffer device support"
depends on FB && (PPC64 || PPC_OF)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y if you want support with Open Firmware for your graphics
board.
@@ -269,6 +307,9 @@
config FB_CONTROL
bool "Apple \"control\" display support"
depends on FB && PPC_PMAC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports a frame buffer for the graphics adapter in the
Power Macintosh 7300 and others.
@@ -276,6 +317,9 @@
config FB_PLATINUM
bool "Apple \"platinum\" display support"
depends on FB && PPC_PMAC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports a frame buffer for the "platinum" graphics
adapter in some Power Macintoshes.
@@ -283,6 +327,9 @@
config FB_VALKYRIE
bool "Apple \"valkyrie\" display support"
depends on FB && (MAC || PPC_PMAC)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports a frame buffer for the "valkyrie" graphics
adapter in some Power Macintoshes.
@@ -290,6 +337,9 @@
config FB_CT65550
bool "Chips 65550 display support"
depends on FB && PPC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the Chips & Technologies
65550 graphics chip in PowerBooks.
@@ -297,10 +347,14 @@
config FB_ASILIANT
bool "Chips 69000 display support"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
config FB_IMSTT
bool "IMS Twin Turbo display support"
depends on FB && PCI
+ select FB_CFB_IMAGEBLIT
help
The IMS Twin Turbo is a PCI-based frame buffer card bundled with
many Macintosh and compatible computers.
@@ -314,6 +368,9 @@
config FB_VGA16
tristate "VGA 16-color graphics support"
depends on FB && (X86 || PPC)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for VGA 16 color graphic
cards. Say Y if you have such a card.
@@ -324,6 +381,9 @@
config FB_STI
tristate "HP STI frame buffer device support"
depends on FB && PARISC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
default y
---help---
STI refers to the HP "Standard Text Interface" which is a set of
@@ -341,16 +401,24 @@
config FB_MAC
bool "Generic Macintosh display support"
depends on FB && MAC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
# bool ' Apple DAFB display support' CONFIG_FB_DAFB
config FB_HP300
bool
depends on FB && HP300
+ select FB_CFB_FILLRECT
+ select FB_CFB_IMAGEBLIT
default y
config FB_TGA
tristate "TGA framebuffer support"
depends on FB && ALPHA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for generic TGA graphic
cards. Say Y if you have one of those.
@@ -358,6 +426,9 @@
config FB_VESA
bool "VESA VGA graphics support"
depends on FB && (X86 || X86_64)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
@@ -372,6 +443,9 @@
config FB_HGA
tristate "Hercules mono graphics support"
depends on FB && X86
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y here if you have a Hercules mono graphics card.
@@ -397,12 +471,18 @@
config FB_SGIVW
tristate "SGI Visual Workstation framebuffer support"
depends on FB && X86_VISWS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
SGI Visual Workstation support for framebuffer graphics.
config FB_GBE
bool "SGI Graphics Backend frame buffer support"
depends on FB && (SGI_IP32 || X86_VISWS)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for SGI Graphics Backend.
This chip is used in SGI O2 and Visual Workstation 320/540.
@@ -427,6 +507,9 @@
config FB_BW2
bool "BWtwo support"
depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the BWtwo frame buffer.
@@ -439,6 +522,8 @@
config FB_CG6
bool "CGsix (GX,TurboGX) support"
depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the CGsix (GX, TurboGX)
frame buffer.
@@ -446,6 +531,9 @@
config FB_PVR2
tristate "NEC PowerVR 2 display support"
depends on FB && SH_DREAMCAST
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
---help---
Say Y here if you have a PowerVR 2 card in your box. If you plan to
run linux on your Dreamcast, you will have to say Y here.
@@ -464,6 +552,9 @@
config FB_EPSON1355
bool "Epson 1355 framebuffer support"
depends on FB && (SUPERH || ARCH_CEIVA)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Build in support for the SED1355 Epson Research Embedded RAMDAC
LCD/CRT Controller (since redesignated as the S1D13505) as a
@@ -476,6 +567,9 @@
select I2C_ALGOBIT if FB_RIVA_I2C
select I2C if FB_RIVA_I2C
select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
@@ -511,6 +605,9 @@
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports the on-board graphics built in to the Intel 810
and 815 chipsets. Say Y if you have and plan to use such a board.
@@ -568,6 +665,9 @@
config FB_MATROX
tristate "Matrox acceleration"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
---help---
Say Y here if you have a Matrox Millennium, Matrox Millennium II,
Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
@@ -723,6 +823,9 @@
config FB_RADEON_OLD
tristate "ATI Radeon display support (Old driver)"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Choose this option if you want to use an ATI Radeon graphics card as
a framebuffer device. There are both PCI and AGP versions. You
@@ -770,6 +873,9 @@
config FB_ATY128
tristate "ATI Rage128 display support"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports graphics boards with the ATI Rage128 chips.
Say Y if you have such a graphics board and read
@@ -781,6 +887,9 @@
config FB_ATY
tristate "ATI Mach64 display support" if PCI || ATARI
depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports graphics boards with the ATI Mach64 chips.
Say Y if you have such a graphics board.
@@ -828,6 +937,9 @@
select I2C_ALGOBIT if FB_SAVAGE_I2C
select I2C if FB_SAVAGE_I2C
select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports notebooks and computers with S3 Savage PCI/AGP
chips.
@@ -861,6 +973,9 @@
config FB_SIS
tristate "SiS acceleration"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the SiS 300, 315 and
330 series VGA chipsets. Specs available at http://www.sis.com
@@ -885,6 +1000,9 @@
tristate "NeoMagic display support"
depends on FB && PCI
select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This driver supports notebooks with NeoMagic PCI chips.
Say Y if you have such a graphics card.
@@ -895,6 +1013,9 @@
config FB_KYRO
tristate "IMG Kyro support"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
graphics board.
@@ -905,6 +1026,7 @@
config FB_3DFX
tristate "3Dfx Banshee/Voodoo3 display support"
depends on FB && PCI
+ select FB_CFB_IMAGEBLIT
help
This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
chips. Say Y if you have such a graphics board.
@@ -938,6 +1060,9 @@
config FB_TRIDENT
tristate "Trident support"
depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
---help---
This driver is supposed to support graphics boards with the
Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
@@ -975,6 +1100,8 @@
config FB_FFB
bool "Creator/Creator3D/Elite3D support"
depends on FB_SBUS && SPARC64
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the Creator, Creator3D,
and Elite3D graphics boards.
@@ -982,6 +1109,9 @@
config FB_TCX
bool "TCX (SS4/SS5 only) support"
depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the TCX 24/8bit frame
buffer.
@@ -989,6 +1119,9 @@
config FB_CG14
bool "CGfourteen (SX) support"
depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the CGfourteen frame
buffer on Desktop SPARCsystems with the SX graphics option.
@@ -996,6 +1129,9 @@
config FB_P9100
bool "P9100 (Sparcbook 3 only) support"
depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the P9100 card
supported on Sparcbook 3 machines.
@@ -1003,6 +1139,9 @@
config FB_LEO
bool "Leo (ZX) support"
depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the SBUS-based Sun ZX
(leo) frame buffer cards.
@@ -1014,6 +1153,9 @@
config FB_IGA
bool "IGA 168x display support"
depends on SPARC32 && FB_PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the framebuffer device for the INTERGRAPHICS 1680 and
successor frame buffer cards.
@@ -1021,6 +1163,9 @@
config FB_HIT
tristate "HD64461 Frame Buffer support"
depends on FB && HD64461
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the Hitachi HD64461 LCD
frame buffer card.
@@ -1028,6 +1173,9 @@
config FB_PMAG_BA
bool "PMAG-BA TURBOchannel framebuffer support"
depends on FB && DECSTATION && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y here to directly support the on-board PMAG-BA framebuffer in
the 5000/1xx versions of the DECstation. There is a page dedicated
@@ -1036,6 +1184,9 @@
config FB_PMAGB_B
bool "PMAGB-B TURBOchannel framebuffer spport"
depends on FB && DECSTATION && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y here to directly support the on-board PMAGB-B framebuffer in
the 5000/1xx versions of the DECstation. There is a page dedicated
@@ -1044,6 +1195,9 @@
config FB_MAXINE
bool "Maxine (Personal DECstation) onboard framebuffer spport"
depends on FB && DECSTATION && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y here to directly support the on-board framebuffer in the
Maxine (5000/20, /25, /33) version of the DECstation. There is a
@@ -1052,6 +1206,9 @@
config FB_TX3912
bool "TMPTX3912/PR31700 frame buffer support"
depends on FB && NINO
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
@@ -1061,6 +1218,9 @@
config FB_68328
bool "Motorola 68328 native frame buffer support"
depends on (M68328 || M68EZ328 || M68VZ328)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
Say Y here if you want to support the built-in frame buffer of
the Motorola 68328 CPU family.
@@ -1068,6 +1228,9 @@
config FB_PXA
tristate "PXA LCD framebuffer support"
depends on FB && ARCH_PXA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
---help---
Frame buffer driver for the built-in LCD controller in the Intel
PXA2x0 processor.
@@ -1099,6 +1262,9 @@
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
---help---
This is a `virtual' frame buffer device. It operates on a chunk of
unswappable kernel memory instead of on the memory of a graphics
Index: linux-2.6-i386/drivers/video/Makefile
===================================================================
--- linux-2.6-i386.orig/drivers/video/Makefile 2005-02-15 10:11:43.064192554 +0000
+++ linux-2.6-i386/drivers/video/Makefile 2005-02-15 10:12:46.082097881 +0000
@@ -20,90 +20,74 @@
# Hardware specific drivers go first
obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o
obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o
-obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
+obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
obj-$(CONFIG_FB_CYBER) += cyberfb.o
-obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_PM2) += pm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
+obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
+obj-$(CONFIG_FB_PM2) += pm2fb.o
obj-$(CONFIG_FB_PM3) += pm3fb.o
-obj-$(CONFIG_FB_MATROX) += matrox/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_RIVA) += riva/ cfbimgblt.o cfbfillrect.o \
- cfbcopyarea.o vgastate.o
-obj-$(CONFIG_FB_ATY) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_ATY128) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_RADEON) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_SIS) += sis/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_KYRO) += kyro/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_SAVAGE) += savage/ cfbfillrect.o cfbcopyarea.o \
- cfbimgblt.o
-obj-$(CONFIG_FB_I810) += cfbcopyarea.o cfbfillrect.o cfbimgblt.o \
- vgastate.o
-obj-$(CONFIG_FB_INTEL) += cfbfillrect.o cfbcopyarea.o \
- cfbimgblt.o
-
-obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_NEOMAGIC) += neofb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o vgastate.o
+obj-$(CONFIG_FB_MATROX) += matrox/
+obj-$(CONFIG_FB_RIVA) += riva/ vgastate.o
+obj-$(CONFIG_FB_ATY) += aty/
+obj-$(CONFIG_FB_ATY128) += aty/
+obj-$(CONFIG_FB_RADEON) += aty/
+obj-$(CONFIG_FB_SIS) += sis/
+obj-$(CONFIG_FB_KYRO) += kyro/
+obj-$(CONFIG_FB_SAVAGE) += savage/
+obj-$(CONFIG_FB_I810) += vgastate.o
+obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o
+obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o
obj-$(CONFIG_FB_VIRGE) += virgefb.o
-obj-$(CONFIG_FB_3DFX) += tdfxfb.o cfbimgblt.o
-ifneq ($(CONFIG_FB_3DFX_ACCEL),y)
-obj-$(CONFIG_FB_3DFX) += cfbfillrect.o cfbcopyarea.o
-endif
-obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_CT65550) += chipsfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_IMSTT) += imsttfb.o cfbimgblt.o
+obj-$(CONFIG_FB_3DFX) += tdfxfb.o
+obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o
+obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o
+obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o
+obj-$(CONFIG_FB_CT65550) += chipsfb.o
+obj-$(CONFIG_FB_IMSTT) += imsttfb.o
obj-$(CONFIG_FB_S3TRIO) += S3triofb.o
-obj-$(CONFIG_FB_FM2) += fm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_TRIDENT) += tridentfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o
-obj-$(CONFIG_FB_STI) += stifb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o cfbimgblt.o cfbcopyarea.o
-obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o cfbimgblt.o cfbcopyarea.o
-obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o cfbimgblt.o cfbcopyarea.o \
- cfbfillrect.o
-obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o cfbimgblt.o cfbcopyarea.o \
- cfbfillrect.o
-obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o cfbimgblt.o cfbcopyarea.o \
- cfbfillrect.o
-obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o cfbimgblt.o cfbcopyarea.o \
- cfbfillrect.o
-obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o cfbimgblt.o cfbcopyarea.o \
- cfbfillrect.o
-obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o cfbimgblt.o cfbcopyarea.o \
- cfbfillrect.o
-obj-$(CONFIG_FB_SGIVW) += sgivwfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_ACORN) += acornfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
+obj-$(CONFIG_FB_FM2) += fm2fb.o
+obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
+obj-$(CONFIG_FB_STI) += stifb.o
+obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o
+obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o
+obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o
+obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o
+obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o
+obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o
+obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o
+obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o
+obj-$(CONFIG_FB_SGIVW) += sgivwfb.o
+obj-$(CONFIG_FB_ACORN) += acornfb.o
obj-$(CONFIG_FB_ATARI) += atafb.o
-obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_HGA) += hgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_IGA) += igafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_APOLLO) += dnfb.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_Q40) += q40fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_TGA) += tgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_HP300) += hpfb.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_G364) += g364fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_SA1100) += sa1100fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
+obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o
+obj-$(CONFIG_FB_HGA) += hgafb.o
+obj-$(CONFIG_FB_IGA) += igafb.o
+obj-$(CONFIG_FB_APOLLO) += dnfb.o
+obj-$(CONFIG_FB_Q40) += q40fb.o
+obj-$(CONFIG_FB_TGA) += tgafb.o
+obj-$(CONFIG_FB_HP300) += hpfb.o
+obj-$(CONFIG_FB_G364) += g364fb.o
+obj-$(CONFIG_FB_SA1100) += sa1100fb.o
obj-$(CONFIG_FB_SUN3) += sun3fb.o
-obj-$(CONFIG_FB_HIT) += hitfb.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_TX3912) += tx3912fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_PVR2) += pvr2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_MAXINE) += maxinefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_VOODOO1) += sstfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_68328) += 68328fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_GBE) += gbefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o
-obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_PXA) += pxafb.o cfbimgblt.o cfbcopyarea.o cfbfillrect.o
+obj-$(CONFIG_FB_HIT) += hitfb.o
+obj-$(CONFIG_FB_TX3912) += tx3912fb.o
+obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
+obj-$(CONFIG_FB_PVR2) += pvr2fb.o
+obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
+obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
+obj-$(CONFIG_FB_MAXINE) += maxinefb.o
+obj-$(CONFIG_FB_VOODOO1) += sstfb.o
+obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
+obj-$(CONFIG_FB_68328) += 68328fb.o
+obj-$(CONFIG_FB_GBE) += gbefb.o
+obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o
+obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
+obj-$(CONFIG_FB_PXA) += pxafb.o
# Platform or fallback drivers go here
-obj-$(CONFIG_FB_VESA) += vesafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_VGA16) += vga16fb.o cfbfillrect.o cfbcopyarea.o \
- cfbimgblt.o vgastate.o
-obj-$(CONFIG_FB_OF) += offb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o
+obj-$(CONFIG_FB_VESA) += vesafb.o
+obj-$(CONFIG_FB_VGA16) += vga16fb.o vgastate.o
+obj-$(CONFIG_FB_OF) += offb.o
# the test framebuffer is last
-obj-$(CONFIG_FB_VIRTUAL) += vfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
+obj-$(CONFIG_FB_VIRTUAL) += vfb.o
next prev parent reply other threads:[~2005-02-15 10:53 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-14 12:17 [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) David Vrabel
2005-02-14 12:23 ` Geert Uytterhoeven
2005-02-14 13:50 ` David Vrabel
2005-02-14 14:04 ` [patch] Framebuffer kbuild -- add FB_CFB_xxx options (1/2) David Vrabel
2005-02-14 14:06 ` Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/2) David Vrabel
2005-02-14 14:12 ` David Vrabel
2005-02-14 17:25 ` [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) James Simmons
2005-02-15 10:45 ` [patch] Framebuffer kbuild -- add options for building software ops (0/4) David Vrabel
2005-02-15 10:51 ` Framebuffer kbuild -- add FB_CFB_xxx options (1/4) David Vrabel
2005-02-15 10:53 ` David Vrabel [this message]
2005-02-15 10:54 ` [patch] Framebuffer kbuild -- add FB_SOFT_CURSOR option (3/4) David Vrabel
2005-02-15 10:55 ` [patch] Framebuffer kbuild -- make all drivers select FB_SOFT_CURSOR (4/4) David Vrabel
2005-02-14 12:43 ` [patch] Framebuffer kbuild -- add FB_SOFTWARE_CFB_OPS for building cfb*.o (1/2) David Vrabel
2005-02-14 12:46 ` [patch] Framebuffer kbuild -- make drivers select FB_SOFTWARE_CFB_OPS (2/2) David Vrabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4211D495.3080506@arcom.com \
--to=dvrabel@arcom.com \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.