From: David Vrabel <dvrabel@arcom.com>
To: linux-fbdev-devel@lists.sourceforge.net
Subject: [patch] Framebuffer kbuild -- make all drivers select FB_SOFT_CURSOR (4/4)
Date: Tue, 15 Feb 2005 10:55:47 +0000 [thread overview]
Message-ID: <4211D533.2050208@arcom.com> (raw)
In-Reply-To: <4211D2DF.2070302@arcom.com>
[-- Attachment #1: Type: text/plain, Size: 121 bytes --]
Make all framebuffer drivers (where appropriate) select FB_SOFT_CURSOR.
Signed-off-by: David Vrabel <dvrabel@arcom.com>
[-- Attachment #2: fb-kbuild-use-FB_SOFT_CURSOR --]
[-- Type: text/plain, Size: 13815 bytes --]
Index: linux-2.6-i386/drivers/video/Kconfig
===================================================================
--- linux-2.6-i386.orig/drivers/video/Kconfig 2005-02-15 10:15:38.741700140 +0000
+++ linux-2.6-i386/drivers/video/Kconfig 2005-02-15 10:25:52.403661336 +0000
@@ -109,6 +109,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
---help---
This enables support for Cirrus Logic GD542x/543x based boards on
Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
@@ -127,6 +128,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Permedia2 AGP frame
buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
@@ -145,6 +147,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This framebuffer device driver is for the ARM PrimeCell PL110
Colour LCD controller. ARM PrimeCells provide the building
@@ -161,6 +164,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Acorn VIDC graphics
hardware found in Acorn RISC PCs and other ARM-based machines. If
@@ -172,6 +176,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
config FB_SA1100
bool "SA-1100 LCD support"
@@ -179,6 +184,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is a framebuffer device for the SA-1100 LCD Controller.
See <http://www.linux-fbdev.org/> for information on framebuffer
@@ -193,6 +199,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This enables support for the Integraphics CyberPro 20x0 and 5000
VGA chips used in the Rebel.com Netwinder and other machines.
@@ -205,6 +212,7 @@
default y
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
config FB_Q40
bool
@@ -213,6 +221,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
config FB_AMIGA
tristate "Amiga native chipset support"
@@ -256,6 +265,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This enables support for the Cybervision 64 graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
@@ -270,6 +280,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This enables support for the Cybervision 64/3D graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
@@ -292,6 +303,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Amiga FrameMaster
card from BSC (exhibited 1992 but not shipped as a CBM product).
@@ -309,6 +321,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
Say Y if you want support with Open Firmware for your graphics
board.
@@ -319,6 +332,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This driver supports a frame buffer for the graphics adapter in the
Power Macintosh 7300 and others.
@@ -329,6 +343,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This driver supports a frame buffer for the "platinum" graphics
adapter in some Power Macintoshes.
@@ -339,6 +354,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This driver supports a frame buffer for the "valkyrie" graphics
adapter in some Power Macintoshes.
@@ -349,6 +365,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Chips & Technologies
65550 graphics chip in PowerBooks.
@@ -359,11 +376,13 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
config FB_IMSTT
bool "IMS Twin Turbo display support"
depends on FB && PCI
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
The IMS Twin Turbo is a PCI-based frame buffer card bundled with
many Macintosh and compatible computers.
@@ -380,6 +399,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for VGA 16 color graphic
cards. Say Y if you have such a card.
@@ -393,6 +413,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
default y
---help---
STI refers to the HP "Standard Text Interface" which is a set of
@@ -413,6 +434,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
# bool ' Apple DAFB display support' CONFIG_FB_DAFB
config FB_HP300
@@ -420,6 +442,7 @@
depends on FB && HP300
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
default y
config FB_TGA
@@ -428,6 +451,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for generic TGA graphic
cards. Say Y if you have one of those.
@@ -438,6 +462,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
@@ -455,6 +480,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
Say Y here if you have a Hercules mono graphics card.
@@ -483,6 +509,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
SGI Visual Workstation support for framebuffer graphics.
@@ -492,6 +519,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for SGI Graphics Backend.
This chip is used in SGI O2 and Visual Workstation 320/540.
@@ -519,6 +547,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the BWtwo frame buffer.
@@ -533,6 +562,7 @@
depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGsix (GX, TurboGX)
frame buffer.
@@ -543,6 +573,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
---help---
Say Y here if you have a PowerVR 2 card in your box. If you plan to
run linux on your Dreamcast, you will have to say Y here.
@@ -564,6 +595,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
Build in support for the SED1355 Epson Research Embedded RAMDAC
LCD/CRT Controller (since redesignated as the S1D13505) as a
@@ -617,6 +649,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This driver supports the on-board graphics built in to the Intel 810
and 815 chipsets. Say Y if you have and plan to use such a board.
@@ -677,6 +710,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
---help---
Say Y here if you have a Matrox Millennium, Matrox Millennium II,
Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
@@ -835,6 +869,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
Choose this option if you want to use an ATI Radeon graphics card as
a framebuffer device. There are both PCI and AGP versions. You
@@ -885,6 +920,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This driver supports graphics boards with the ATI Rage128 chips.
Say Y if you have such a graphics board and read
@@ -899,6 +935,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This driver supports graphics boards with the ATI Mach64 chips.
Say Y if you have such a graphics board.
@@ -949,6 +986,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This driver supports notebooks and computers with S3 Savage PCI/AGP
chips.
@@ -985,6 +1023,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the SiS 300, 315 and
330 series VGA chipsets. Specs available at http://www.sis.com
@@ -1012,6 +1051,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This driver supports notebooks with NeoMagic PCI chips.
Say Y if you have such a graphics card.
@@ -1025,6 +1065,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
graphics board.
@@ -1036,6 +1077,7 @@
tristate "3Dfx Banshee/Voodoo3 display support"
depends on FB && PCI
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
chips. Say Y if you have such a graphics board.
@@ -1072,6 +1114,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
---help---
This driver is supposed to support graphics boards with the
Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
@@ -1111,6 +1154,7 @@
depends on FB_SBUS && SPARC64
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Creator, Creator3D,
and Elite3D graphics boards.
@@ -1121,6 +1165,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the TCX 24/8bit frame
buffer.
@@ -1131,6 +1176,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGfourteen frame
buffer on Desktop SPARCsystems with the SX graphics option.
@@ -1141,6 +1187,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the P9100 card
supported on Sparcbook 3 machines.
@@ -1151,6 +1198,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the SBUS-based Sun ZX
(leo) frame buffer cards.
@@ -1165,6 +1213,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the framebuffer device for the INTERGRAPHICS 1680 and
successor frame buffer cards.
@@ -1175,6 +1224,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Hitachi HD64461 LCD
frame buffer card.
@@ -1185,6 +1235,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
Say Y here to directly support the on-board PMAG-BA framebuffer in
the 5000/1xx versions of the DECstation. There is a page dedicated
@@ -1196,6 +1247,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
Say Y here to directly support the on-board PMAGB-B framebuffer in
the 5000/1xx versions of the DECstation. There is a page dedicated
@@ -1207,6 +1259,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
Say Y here to directly support the on-board framebuffer in the
Maxine (5000/20, /25, /33) version of the DECstation. There is a
@@ -1218,6 +1271,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
@@ -1230,6 +1284,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
help
Say Y here if you want to support the built-in frame buffer of
the Motorola 68328 CPU family.
@@ -1240,6 +1295,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
---help---
Frame buffer driver for the built-in LCD controller in the Intel
PXA2x0 processor.
@@ -1274,6 +1330,7 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
---help---
This is a `virtual' frame buffer device. It operates on a chunk of
unswappable kernel memory instead of on the memory of a graphics
next prev parent reply other threads:[~2005-02-15 10:55 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-14 12:17 [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) David Vrabel
2005-02-14 12:23 ` Geert Uytterhoeven
2005-02-14 13:50 ` David Vrabel
2005-02-14 14:04 ` [patch] Framebuffer kbuild -- add FB_CFB_xxx options (1/2) David Vrabel
2005-02-14 14:06 ` Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/2) David Vrabel
2005-02-14 14:12 ` David Vrabel
2005-02-14 17:25 ` [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) James Simmons
2005-02-15 10:45 ` [patch] Framebuffer kbuild -- add options for building software ops (0/4) David Vrabel
2005-02-15 10:51 ` Framebuffer kbuild -- add FB_CFB_xxx options (1/4) David Vrabel
2005-02-15 10:53 ` [patch] Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/4) David Vrabel
2005-02-15 10:54 ` [patch] Framebuffer kbuild -- add FB_SOFT_CURSOR option (3/4) David Vrabel
2005-02-15 10:55 ` David Vrabel [this message]
2005-02-14 12:43 ` [patch] Framebuffer kbuild -- add FB_SOFTWARE_CFB_OPS for building cfb*.o (1/2) David Vrabel
2005-02-14 12:46 ` [patch] Framebuffer kbuild -- make drivers select FB_SOFTWARE_CFB_OPS (2/2) David Vrabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4211D533.2050208@arcom.com \
--to=dvrabel@arcom.com \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.