From: Charles-Edouard Ruault <ce@idtect.com>
To: torvalds@osdl.org, akpm@osdl.org
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH] Reserve only needed regions for PC timers on i386 and x86_64
Date: Mon, 21 Feb 2005 14:06:18 +0100 [thread overview]
Message-ID: <4219DCCA.1090509@idtect.com> (raw)
In-Reply-To: <1108487045.4618.12.camel@localhost.localdomain>
[-- Attachment #1: Type: text/plain, Size: 1175 bytes --]
Alan Cox wrote:
>On Llu, 2005-02-07 at 09:29, Charles-Edouard Ruault wrote:
>
>
>>- Why is the generic timer using this address ? isn't it reserving a too
>>wide portion of IO ports ? Should it be modified for this board ?
>>
>>
>
>It just reserved the entire chip space since way back when.
>
>
>
>>- If there's a good reason for the timer to request this address, is
>>there a clean way to share it with the timer ?
>>
>>
>
>Submit a small patch to Linus/Andrew to make the generic code only
>reserve the ports it should. It's just a historical oversight
>
>
>
Linus, Andrew,
As suggested by Alan, here's a small patch against kernel 2.4.29 to
split the IO addresses reserved for the PC timer into two regions
instead of a large one.
It mimics what has been done in kernel 2.6.
Instead of reserving 0x40 through 0x5f it reserves only what the two
timers need, i.e 0x40-0x43 and 0x50-0x53.
It patches both i386 and x86_64 architecture.
Please CC me in replies since i did not subscribe to the list.
--
Charles-Edouard Ruault
Idtect SA
115 rue Reaumur - 75002, Paris, France
Tel: +33-1-55-34-76-65
Fax: +33-1-55-34-76-75
Web: http://www.idtect.com
[-- Attachment #2: i386-x86_64-timer.patch --]
[-- Type: text/plain, Size: 1104 bytes --]
--- linux/arch/i386/kernel/setup.c.orig Fri Feb 18 18:46:55 2005
+++ linux/arch/i386/kernel/setup.c Mon Feb 21 11:19:45 2005
@@ -354,7 +354,8 @@
struct resource standard_io_resources[] = {
{ "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
{ "pic1", 0x20, 0x3f, IORESOURCE_BUSY },
- { "timer", 0x40, 0x5f, IORESOURCE_BUSY },
+ { "timer0", 0x40, 0x43, IORESOURCE_BUSY },
+ { "timer1", 0x50, 0x53, IORESOURCE_BUSY },
{ "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
{ "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
{ "pic2", 0xa0, 0xbf, IORESOURCE_BUSY },
--- linux/arch/x86_64/kernel/setup.c.orig Mon Feb 21 11:56:11 2005
+++ linux/arch/x86_64/kernel/setup.c Mon Feb 21 11:54:41 2005
@@ -93,7 +93,8 @@
struct resource standard_io_resources[] = {
{ "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
{ "pic1", 0x20, 0x3f, IORESOURCE_BUSY },
- { "timer", 0x40, 0x5f, IORESOURCE_BUSY },
+ { "timer0", 0x40, 0x43, IORESOURCE_BUSY },
+ { "timer1", 0x50, 0x53, IORESOURCE_BUSY },
{ "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
{ "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
{ "pic2", 0xa0, 0xbf, IORESOURCE_BUSY },
next prev parent reply other threads:[~2005-02-21 13:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-07 9:29 IO port conflict between timer & watchdog on PCISA-C800EV board ? Charles-Edouard Ruault
2005-02-07 16:31 ` Randy.Dunlap
2005-02-07 17:00 ` linux-os
2005-02-07 17:33 ` Charles-Edouard Ruault
2005-02-07 17:32 ` Charles-Edouard Ruault
2005-02-07 17:57 ` Ondrej Zary
2005-02-15 17:04 ` Alan Cox
2005-02-21 13:06 ` Charles-Edouard Ruault [this message]
2005-02-23 7:23 ` [PATCH] Reserve only needed regions for PC timers on i386 and x86_64 Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4219DCCA.1090509@idtect.com \
--to=ce@idtect.com \
--cc=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.