* [patch] consolidate interrupt-related constants
@ 2005-03-09 20:25 Stas Sergeev
0 siblings, 0 replies; only message in thread
From: Stas Sergeev @ 2005-03-09 20:25 UTC (permalink / raw)
To: Linux kernel
[-- Attachment #1: Type: text/plain, Size: 970 bytes --]
Hello.
Attached patch moves the three
interrupt-related constants, namely
SA_PROBE, SA_SAMPLE_RANDOM and
SA_SHIRQ, from the arch-specific
headers to the generic header
linux/signal.h. Now, as the interrupt
handling code was recently consolidated,
it looks likely that the related flags
have to be either.
This is mainly only a cleanup, but
it also makes a common place for
adding the new arch-independant flags
for interrupt handling.
For my drivers I just used to add such
a flags into an i386-specific header
since the drivers were intended to work
only on that hardware. But now, as the
interrupt handling code in kernel was
consolidated, adding such a flags to the
arch-specific header breaks the compilation
for other archs, so I thought having a
common place for that arch-independant
flags would be good.
The problem with that patch is that
I can't test it on something other
than x86. But it may work as expected.
Signed-off-by: Stas Sergeev <stsp@aknet.ru>
[-- Attachment #2: linux-2.6.11-hdr.diff --]
[-- Type: text/x-patch, Size: 19504 bytes --]
diff -ur linux-2.6.11/include/asm-alpha/signal.h linux-2.6.11-hdr/include/asm-alpha/signal.h
--- linux-2.6.11/include/asm-alpha/signal.h 2005-01-17 09:36:46.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-alpha/signal.h 2005-03-09 11:17:45.000000000 +0300
@@ -109,20 +109,6 @@
#define MINSIGSTKSZ 4096
#define SIGSTKSZ 16384
-
-#ifdef __KERNEL__
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x40000000
-#endif
-
#define SIG_BLOCK 1 /* for blocking signals */
#define SIG_UNBLOCK 2 /* for unblocking signals */
#define SIG_SETMASK 3 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-arm/signal.h linux-2.6.11-hdr/include/asm-arm/signal.h
--- linux-2.6.11/include/asm-arm/signal.h 2005-01-17 09:36:41.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-arm/signal.h 2005-03-09 11:33:19.000000000 +0300
@@ -114,18 +114,7 @@
#define SIGSTKSZ 8192
#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE 0x80000000
-#define SA_SAMPLE_RANDOM 0x10000000
#define SA_IRQNOMASK 0x08000000
-#define SA_SHIRQ 0x04000000
#endif
#define SIG_BLOCK 0 /* for blocking signals */
diff -ur linux-2.6.11/include/asm-arm26/signal.h linux-2.6.11-hdr/include/asm-arm26/signal.h
--- linux-2.6.11/include/asm-arm26/signal.h 2005-01-17 09:36:47.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-arm26/signal.h 2005-03-09 11:39:28.000000000 +0300
@@ -114,18 +114,7 @@
#define SIGSTKSZ 8192
#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE 0x80000000
-#define SA_SAMPLE_RANDOM 0x10000000
#define SA_IRQNOMASK 0x08000000
-#define SA_SHIRQ 0x04000000
#endif
#define SIG_BLOCK 0 /* for blocking signals */
diff -ur linux-2.6.11/include/asm-cris/signal.h linux-2.6.11-hdr/include/asm-cris/signal.h
--- linux-2.6.11/include/asm-cris/signal.h 2005-01-17 09:36:38.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-cris/signal.h 2005-03-09 11:34:52.000000000 +0300
@@ -108,20 +108,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-frv/signal.h linux-2.6.11-hdr/include/asm-frv/signal.h
--- linux-2.6.11/include/asm-frv/signal.h 2005-01-17 09:42:36.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-frv/signal.h 2005-03-09 11:16:45.000000000 +0300
@@ -107,20 +107,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-h8300/signal.h linux-2.6.11-hdr/include/asm-h8300/signal.h
--- linux-2.6.11/include/asm-h8300/signal.h 2005-01-17 09:36:46.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-h8300/signal.h 2005-03-09 11:17:59.000000000 +0300
@@ -107,19 +107,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-i386/signal.h linux-2.6.11-hdr/include/asm-i386/signal.h
--- linux-2.6.11/include/asm-i386/signal.h 2005-01-17 09:36:45.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-i386/signal.h 2005-03-09 11:14:42.000000000 +0300
@@ -110,20 +110,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-ia64/signal.h linux-2.6.11-hdr/include/asm-ia64/signal.h
--- linux-2.6.11/include/asm-ia64/signal.h 2005-02-21 11:02:00.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-ia64/signal.h 2005-03-09 11:20:29.000000000 +0300
@@ -114,16 +114,6 @@
#define _NSIG_BPW 64
#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
#define SA_PERCPU_IRQ 0x02000000
#endif /* __KERNEL__ */
diff -ur linux-2.6.11/include/asm-m32r/signal.h linux-2.6.11-hdr/include/asm-m32r/signal.h
--- linux-2.6.11/include/asm-m32r/signal.h 2005-01-17 09:36:40.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-m32r/signal.h 2005-03-09 11:33:35.000000000 +0300
@@ -114,20 +114,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-m68k/signal.h linux-2.6.11-hdr/include/asm-m68k/signal.h
--- linux-2.6.11/include/asm-m68k/signal.h 2005-01-17 09:36:46.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-m68k/signal.h 2005-03-09 11:18:16.000000000 +0300
@@ -105,19 +105,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-m68knommu/signal.h linux-2.6.11-hdr/include/asm-m68knommu/signal.h
--- linux-2.6.11/include/asm-m68knommu/signal.h 2005-01-17 09:36:44.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-m68knommu/signal.h 2005-03-09 11:32:07.000000000 +0300
@@ -105,19 +105,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-mips/signal.h linux-2.6.11-hdr/include/asm-mips/signal.h
--- linux-2.6.11/include/asm-mips/signal.h 2005-01-17 09:36:39.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-mips/signal.h 2005-03-09 11:34:41.000000000 +0300
@@ -98,21 +98,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ flag is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x02000000
-
-#endif /* __KERNEL__ */
-
#define SIG_BLOCK 1 /* for blocking signals */
#define SIG_UNBLOCK 2 /* for unblocking signals */
#define SIG_SETMASK 3 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-parisc/signal.h linux-2.6.11-hdr/include/asm-parisc/signal.h
--- linux-2.6.11/include/asm-parisc/signal.h 2005-01-17 09:36:40.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-parisc/signal.h 2005-03-09 11:34:00.000000000 +0300
@@ -89,17 +89,6 @@
#define _NSIG_BPW BITS_PER_LONG
#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-
#endif /* __KERNEL__ */
#define SIG_BLOCK 0 /* for blocking signals */
diff -ur linux-2.6.11/include/asm-ppc/signal.h linux-2.6.11-hdr/include/asm-ppc/signal.h
--- linux-2.6.11/include/asm-ppc/signal.h 2005-01-17 09:42:36.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-ppc/signal.h 2005-03-09 11:34:13.000000000 +0300
@@ -99,19 +99,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif /* __KERNEL__ */
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
diff -ur linux-2.6.11/include/asm-ppc64/signal.h linux-2.6.11-hdr/include/asm-ppc64/signal.h
--- linux-2.6.11/include/asm-ppc64/signal.h 2005-01-17 09:36:45.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-ppc64/signal.h 2005-03-09 11:21:53.000000000 +0300
@@ -96,19 +96,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
diff -ur linux-2.6.11/include/asm-s390/signal.h linux-2.6.11-hdr/include/asm-s390/signal.h
--- linux-2.6.11/include/asm-s390/signal.h 2005-01-17 09:36:46.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-s390/signal.h 2005-03-09 11:17:16.000000000 +0300
@@ -117,20 +117,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-sh/signal.h linux-2.6.11-hdr/include/asm-sh/signal.h
--- linux-2.6.11/include/asm-sh/signal.h 2005-01-17 09:36:40.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-sh/signal.h 2005-03-09 11:34:26.000000000 +0300
@@ -108,20 +108,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-sh64/signal.h linux-2.6.11-hdr/include/asm-sh64/signal.h
--- linux-2.6.11/include/asm-sh64/signal.h 2005-01-17 09:36:44.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-sh64/signal.h 2005-03-09 11:32:19.000000000 +0300
@@ -107,20 +107,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ THREAD_SIZE
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-sparc/signal.h linux-2.6.11-hdr/include/asm-sparc/signal.h
--- linux-2.6.11/include/asm-sparc/signal.h 2005-01-17 09:36:44.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-sparc/signal.h 2005-03-09 11:31:12.000000000 +0300
@@ -143,7 +143,6 @@
#define SA_ONESHOT _SV_RESET
#define SA_INTERRUPT 0x10u
#define SA_NOMASK 0x20u
-#define SA_SHIRQ 0x40u
#define SA_NOCLDWAIT 0x100u
#define SA_SIGINFO 0x200u
@@ -162,11 +161,6 @@
#ifdef __KERNEL__
/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- *
* DJHR
* SA_STATIC_ALLOC is used for the SPARC system to indicate that this
* interrupt handler's irq structure should be statically allocated
@@ -177,8 +171,6 @@
* statically allocated data.. which is NOT GOOD.
*
*/
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
#define SA_STATIC_ALLOC 0x80
#endif
diff -ur linux-2.6.11/include/asm-sparc64/signal.h linux-2.6.11-hdr/include/asm-sparc64/signal.h
--- linux-2.6.11/include/asm-sparc64/signal.h 2005-01-17 09:36:44.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-sparc64/signal.h 2005-03-09 11:31:49.000000000 +0300
@@ -145,7 +145,6 @@
#define SA_ONESHOT _SV_RESET
#define SA_INTERRUPT 0x10u
#define SA_NOMASK 0x20u
-#define SA_SHIRQ 0x40u
#define SA_NOCLDWAIT 0x100u
#define SA_SIGINFO 0x200u
@@ -165,11 +164,6 @@
#ifdef __KERNEL__
/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- *
* DJHR
* SA_STATIC_ALLOC is used for the SPARC system to indicate that this
* interrupt handler's irq structure should be statically allocated
@@ -180,8 +174,6 @@
* statically allocated data.. which is NOT GOOD.
*
*/
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
#define SA_STATIC_ALLOC 0x80
#endif
diff -ur linux-2.6.11/include/asm-v850/signal.h linux-2.6.11-hdr/include/asm-v850/signal.h
--- linux-2.6.11/include/asm-v850/signal.h 2005-01-17 09:36:45.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-v850/signal.h 2005-03-09 11:21:02.000000000 +0300
@@ -110,21 +110,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-
-#ifdef __KERNEL__
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif /* __KERNEL__ */
-
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-x86_64/signal.h linux-2.6.11-hdr/include/asm-x86_64/signal.h
--- linux-2.6.11/include/asm-x86_64/signal.h 2005-01-17 09:36:44.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-x86_64/signal.h 2005-03-09 11:32:36.000000000 +0300
@@ -116,20 +116,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/linux/signal.h linux-2.6.11-hdr/include/linux/signal.h
--- linux-2.6.11/include/linux/signal.h 2005-01-17 09:36:43.000000000 +0300
+++ linux-2.6.11-hdr/include/linux/signal.h 2005-03-09 11:15:32.000000000 +0300
@@ -8,6 +8,17 @@
#ifdef __KERNEL__
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE SA_ONESHOT
+#define SA_SAMPLE_RANDOM SA_RESTART
+#define SA_SHIRQ 0x04000000
+
#define MAX_SIGPENDING 1024
/*
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-03-09 20:41 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-03-09 20:25 [patch] consolidate interrupt-related constants Stas Sergeev
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.