From: Lorenzo Ferrara <lorenzo.ferrara@gmx.it>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] Does the Trust BT180 (Broadcom 0x200a) work? and question on bnep0 device.
Date: Mon, 14 Mar 2005 13:15:42 +0100 [thread overview]
Message-ID: <4235806E.4020008@gmx.it> (raw)
Hello,
1) Does the Trust BT180 Class 1 Bluetooth Adapter work correctly,
without loading any firmware?
2) I tried to configure my Adapter so I could run ifconfing bnep0 ....
The only problem is that I don't have a bnep0 device. I read that I
need at list 2 working computers with a bluetooth adapter (working)
on both, and that I will have the bnep0 adapter only after I have run
pand --connect xx:xx:xx:xx:xx:xx --service GN
|__SERVER ADDRESS_|
Is that true?
Here is some info, if you ned anything else please ask.
--------------------------------------------------------------------
Kernel info:
--------------------------------------------------------------------
I have compiled as module everything under
Device Drivers -> Networking support -> Bluetooth subsystem support
uname -a :
Linux port0 2.6.11 #3 Sat Mar 12 12:32:53 CET 2005 i686 GNU/Linux
--------------------------------------------------------------------
lsmod:
Module Size Used by
hci_uart 15228 0
hci_vhci 5248 0
bcm203x 5124 0
bnep 12800 2
hidp 12544 0
rfcomm 35740 0
isofs 32952 1
hci_usb 10888 2
udf 85892 0
ppp_deflate 5120 0
zlib_deflate 21400 1 ppp_deflate
zlib_inflate 17408 2 isofs,ppp_deflate
bsd_comp 5632 0
ppp_async 9472 1
ppp_generic 22932 7 ppp_deflate,bsd_comp,ppp_async
slhc 6912 1 ppp_generic
binfmt_misc 9096 1
l2cap 23556 10 bnep,hidp,rfcomm
bluetooth 45060 11
hci_uart,hci_vhci,bnep,hidp,rfcomm,hci_usb,l2cap
powernow_k7 7464 0
cpufreq_userspace 3676 1
cpufreq_stats 4356 0
freq_table 3588 2 powernow_k7,cpufreq_stats
cpufreq_powersave 1664 0
cpufreq_ondemand 5404 0
thermal 11144 0
processor 18868 2 powernow_k7,thermal
fan 3332 0
button 5136 0
battery 8452 0
ac 3588 0
usbhid 31424 0
via_rhine 20484 0
i2c_viapro 6800 0
i2c_core 18704 1 i2c_viapro
via_ircc 23572 0
irda 119352 1 via_ircc
ehci_hcd 29192 0
uhci_hcd 29840 0
yenta_socket 19976 0
rsrc_nonstatic 9216 1 yenta_socket
pcmcia_core 42400 2 yenta_socket,rsrc_nonstatic
joydev 8128 0
ntfs 105968 1
ext2 44292 1
radeon 74624 1
drm 60692 2 radeon
via_agp 7680 1
agpgart 28712 2 drm,via_agp
parport_pc 25412 1
lp 8900 0
parport 32840 2 parport_pc,lp
sr_mod 14244 0
--------------------------------------------------------------------
This is the usb adapter:
--------------------------------------------------------------------
lsusb -v:
Bus 002 Device 005: ID 0a5c:200a Broadcom Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x0a5c Broadcom Corp.
idProduct 0x200a
bcdDevice 0.04
iManufacturer 1 Broadcom
iProduct 2 BCM92035DGROM
iSerial 3 000B0D6049E8
bNumConfigurations 1
[...]
--------------------------------------------------------------------
cat /proc/bus/usb/devices:
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=200a Rev= 0.04
S: Manufacturer=Broadcom
S: Product=BCM92035DGROM
S: SerialNumber=000B0D6049E8
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
--------------------------------------------------------------------
hciconfig :
hci0: Type: USB
BD Address: 00:0B:0D:60:49:E8 ACL MTU: 377:10 SCO MTU: 16:0
UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:338 acl:0 sco:0 events:48 errors:0
TX bytes:1440 acl:0 sco:0 commands:46 errors:0
--
____________________________________________
/ Lorenzo Ferrara /\
| lorenzo.ferrara <at> gmx <dot> it |_/
|___________________________________________|
| www.lorenzoferrara.net |
| www.aldebaransoftware.net |
| www.pot-pourri.zzn.com |
___|________________________________________ |
\___________________________________________\__/
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2005-03-14 12:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-14 12:15 Lorenzo Ferrara [this message]
2005-03-14 12:23 ` [Bluez-users] Does the Trust BT180 (Broadcom 0x200a) work? and question on bnep0 device Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4235806E.4020008@gmx.it \
--to=lorenzo.ferrara@gmx.it \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.