* [Bluez-users] Does the Trust BT180 (Broadcom 0x200a) work? and question on bnep0 device.
@ 2005-03-14 12:15 Lorenzo Ferrara
2005-03-14 12:23 ` Marcel Holtmann
0 siblings, 1 reply; 2+ messages in thread
From: Lorenzo Ferrara @ 2005-03-14 12:15 UTC (permalink / raw)
To: bluez-users
Hello,
1) Does the Trust BT180 Class 1 Bluetooth Adapter work correctly,
without loading any firmware?
2) I tried to configure my Adapter so I could run ifconfing bnep0 ....
The only problem is that I don't have a bnep0 device. I read that I
need at list 2 working computers with a bluetooth adapter (working)
on both, and that I will have the bnep0 adapter only after I have run
pand --connect xx:xx:xx:xx:xx:xx --service GN
|__SERVER ADDRESS_|
Is that true?
Here is some info, if you ned anything else please ask.
--------------------------------------------------------------------
Kernel info:
--------------------------------------------------------------------
I have compiled as module everything under
Device Drivers -> Networking support -> Bluetooth subsystem support
uname -a :
Linux port0 2.6.11 #3 Sat Mar 12 12:32:53 CET 2005 i686 GNU/Linux
--------------------------------------------------------------------
lsmod:
Module Size Used by
hci_uart 15228 0
hci_vhci 5248 0
bcm203x 5124 0
bnep 12800 2
hidp 12544 0
rfcomm 35740 0
isofs 32952 1
hci_usb 10888 2
udf 85892 0
ppp_deflate 5120 0
zlib_deflate 21400 1 ppp_deflate
zlib_inflate 17408 2 isofs,ppp_deflate
bsd_comp 5632 0
ppp_async 9472 1
ppp_generic 22932 7 ppp_deflate,bsd_comp,ppp_async
slhc 6912 1 ppp_generic
binfmt_misc 9096 1
l2cap 23556 10 bnep,hidp,rfcomm
bluetooth 45060 11
hci_uart,hci_vhci,bnep,hidp,rfcomm,hci_usb,l2cap
powernow_k7 7464 0
cpufreq_userspace 3676 1
cpufreq_stats 4356 0
freq_table 3588 2 powernow_k7,cpufreq_stats
cpufreq_powersave 1664 0
cpufreq_ondemand 5404 0
thermal 11144 0
processor 18868 2 powernow_k7,thermal
fan 3332 0
button 5136 0
battery 8452 0
ac 3588 0
usbhid 31424 0
via_rhine 20484 0
i2c_viapro 6800 0
i2c_core 18704 1 i2c_viapro
via_ircc 23572 0
irda 119352 1 via_ircc
ehci_hcd 29192 0
uhci_hcd 29840 0
yenta_socket 19976 0
rsrc_nonstatic 9216 1 yenta_socket
pcmcia_core 42400 2 yenta_socket,rsrc_nonstatic
joydev 8128 0
ntfs 105968 1
ext2 44292 1
radeon 74624 1
drm 60692 2 radeon
via_agp 7680 1
agpgart 28712 2 drm,via_agp
parport_pc 25412 1
lp 8900 0
parport 32840 2 parport_pc,lp
sr_mod 14244 0
--------------------------------------------------------------------
This is the usb adapter:
--------------------------------------------------------------------
lsusb -v:
Bus 002 Device 005: ID 0a5c:200a Broadcom Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x0a5c Broadcom Corp.
idProduct 0x200a
bcdDevice 0.04
iManufacturer 1 Broadcom
iProduct 2 BCM92035DGROM
iSerial 3 000B0D6049E8
bNumConfigurations 1
[...]
--------------------------------------------------------------------
cat /proc/bus/usb/devices:
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=200a Rev= 0.04
S: Manufacturer=Broadcom
S: Product=BCM92035DGROM
S: SerialNumber=000B0D6049E8
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
--------------------------------------------------------------------
hciconfig :
hci0: Type: USB
BD Address: 00:0B:0D:60:49:E8 ACL MTU: 377:10 SCO MTU: 16:0
UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:338 acl:0 sco:0 events:48 errors:0
TX bytes:1440 acl:0 sco:0 commands:46 errors:0
--
____________________________________________
/ Lorenzo Ferrara /\
| lorenzo.ferrara <at> gmx <dot> it |_/
|___________________________________________|
| www.lorenzoferrara.net |
| www.aldebaransoftware.net |
| www.pot-pourri.zzn.com |
___|________________________________________ |
\___________________________________________\__/
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Bluez-users] Does the Trust BT180 (Broadcom 0x200a) work? and question on bnep0 device.
2005-03-14 12:15 [Bluez-users] Does the Trust BT180 (Broadcom 0x200a) work? and question on bnep0 device Lorenzo Ferrara
@ 2005-03-14 12:23 ` Marcel Holtmann
0 siblings, 0 replies; 2+ messages in thread
From: Marcel Holtmann @ 2005-03-14 12:23 UTC (permalink / raw)
To: BlueZ Mailing List
Hi Lorenzo,
> 1) Does the Trust BT180 Class 1 Bluetooth Adapter work correctly,
> without loading any firmware?
it should work without loading any firmware.
> 2) I tried to configure my Adapter so I could run ifconfing bnep0 ....
> The only problem is that I don't have a bnep0 device. I read that I
> need at list 2 working computers with a bluetooth adapter (working)
> on both, and that I will have the bnep0 adapter only after I have run
>
> pand --connect xx:xx:xx:xx:xx:xx --service GN
>
> |__SERVER ADDRESS_|
>
> Is that true?
On one side you need "pand --connect" on the other "pand --listen".
> hciconfig :
>
> hci0: Type: USB
> BD Address: 00:0B:0D:60:49:E8 ACL MTU: 377:10 SCO MTU: 16:0
> UP RUNNING PSCAN ISCAN AUTH ENCRYPT
> RX bytes:338 acl:0 sco:0 events:48 errors:0
> TX bytes:1440 acl:0 sco:0 commands:46 errors:0
Don't use "auth" and "encrypt". Use the options of the pand server
instead.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-03-14 12:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-03-14 12:15 [Bluez-users] Does the Trust BT180 (Broadcom 0x200a) work? and question on bnep0 device Lorenzo Ferrara
2005-03-14 12:23 ` Marcel Holtmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.