2.6.11-mm4

2.6.11-mm4

[Andrew Morton]

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm4/

- fbdev update

- percfctr updates

- Lots of ppc32/ppc64 things

- Broken on some ia64 machines.  We're still working through fallout from
  the recent pagetable walking consolidation patches.



Changes since 2.6.11-mm3:


 linus.patch
 bk-acpi.patch
 bk-arm.patch
 bk-audit.patch
 bk-cifs.patch
 bk-cpufreq.patch
 bk-driver-core.patch
 bk-drm.patch
 bk-drm-via.patch
 bk-i2c.patch
 bk-ia64.patch
 bk-ieee1394.patch
 bk-input.patch
 bk-kbuild.patch
 bk-netdev.patch
 bk-ntfs.patch
 bk-scsi.patch
 bk-usb.patch
 bk-watchdog.patch
 bk-xfs.patch

 Latest versions of subsystem trees

-ia64-msi-build-fix.patch
-x86-fix-booting-non-numa-system-with-numa-config.patch
-ppc32-add-rtc-hooks-to-katana-fw-bug-workaround.patch
-ppc64-fix-linking-zimage-with-biarch-ld.patch
-ppc64-export-proper-version-from-vdso.patch
-ppc64-dont-use-in_atomic.patch
-ppc64-new-machine-definitions.patch
-ppc64-add-ide-pmac-support-for-new-shasta-chipset.patch
-ppc64-fix-some-pci-interrupt-routing-issues-on-imac-g5.patch
-ppc64-add-basic-support-for-the-smu-chip-in-imac-g5.patch
-pcmcia-update-vrc4171_card.patch
-pcmcia-yenta_socket-ti4150-support.patch
-pcmcia-pd6729-convert-to-pci_register_driver.patch
-pcmcia-rsrc_nonstatic-sysfs-output.patch
-pcmcia-rsrc_nonstatic-sysfs-input.patch
-pcmcia-mark-resource-setup-as-done.patch
-pcmcia-pcmcia_device_probe.patch
-pcmcia-pcmcia_device_remove.patch
-pcmcia-pcmcia_device_add.patch
-pcmcia-use-bus_rescan_devices.patch
-pcmcia-add-pcmcia-devices-autonomously.patch
-pcmcia-determine-some-useful-information-about-devices.patch
-pcmcia-per-device-sysfs-output.patch
-sched-timestamp-fixes.patch
-sched-rework-schedstats.patch
-sched-find_busiest_group-fixlets.patch
-sched-find_busiest_group-cleanup.patch
-sched-re-inline-sched-functions.patch
-v4l-ir-common-update.patch
-v4l-bttv-driver-update.patch
-v4l-video-buf-update.patch
-v4l-bttv-ir-driver-update.patch
-v4l-tuner-update.patch
-v4l-documentation-update.patch
-v4l-tveeprom-update.patch
-stradisc-vfree-checking-cleanups.patch
-miropcm20-radio-cleanup.patch
-media-zr36120-replace-interruptible_sleep_on-with-wait_event_interruptible.patch
-media-zoran_driver-replace-interruptible_sleep_on_timeout-with-wait_event_interruptible_timeout.patch
-media-zoran_device-replace-interruptible_sleep_on-with-wait_event_interruptible.patch
-media-zoran_card-remove-interruptible_sleep_on_timeout-usage.patch
-media-saa7110-remove-sleep_on-usage.patch
-media-radio-zoltrix-replace-sleep_delay-with-msleep.patch
-media-planb-replace-interruptible_sleep_on-with-wait_event.patch
-videotext-use-i2c_client_insmod-macro.patch
-dvb-add-pll-lib.patch
-dvb-mt352-frontend-driver-update.patch
-v4l2-api-mpeg-encoder-support.patch
-saa7134-update.patch
-v4l-cx88-driver-update.patch
-dvb-add-or51132-driver-atsc-demodulator.patch
-media-video-cx88-convert-pci_module_init-to-pci_register_driver.patch
-v4l-maintainers-file-update.patch
-md-erroneous-sizeof-use-in-raid1.patch
-md-fix-multipath-assembly-bug.patch
-md-raid-kconfig-cleanups-remove-experimental-tag-from-raid-6.patch
-md-remove-possible-oops-in-md-raid1.patch
-md-make-raid5-and-raid6-robust-against-failure-during-recovery.patch
-md-remove-kludgy-level-check-from-mdc.patch
-update-documentation-filesystems-locking.patch
-docbook-allow-preprocessor-directives-between-kernel-doc-and-function.patch
-docbook-update-function-parameter-description-in-network-code.patch
-docbook-update-function-parameter-description-in-block-fs-code.patch
-docbook-update-function-parameter-description-in-usb-code.patch
-docbook-fix-function-parameter-descriptin-in-fbmem.patch
-docbook-new-kernel-doc-comments-for-might_sleep-wait_event_.patch
-docbook-convert-template-files-to-xml.patch
-docbook-s-sgml-xml-in-scripts-kernel-doc.patch
-docbook-move-kernel-doc-comment-next-to-function.patch
-docbook-s-sgml-xml-in-documentation-docbook-makefile.patch
-docbook-fix-xml-in-templates.patch
-docbook-kernel-docify-comments.patch
-docbook-add-kfifo-to-kernel-api-docs.patch
-docbook-factor-out-escaping-of-xml-special-characters.patch
-docbook-escape-declaration_purpose.patch
-make-various-things-static.patch
-fix-i2c-messsage-flags-in-video-drivers.patch
-bk-input-hid-core-warning-fix.patch
-st-msleep-warning-fix.patch
-hw-watchdog-vs-softdog-fix.patch
-orphaned-pagecache-memleak-fix.patch
-reiserfs-make-sure-data=journal-buffers-are-cleaned-on-free.patch
-ia64-specific-dev-mem-handlers.patch
-allow-vma-merging-with-mlock-et-al.patch
-ptwalk-pd_none_or_clear_bad.patch
-ptwalk-pd_none_or_clear_bad-ia64-fix.patch
-ptwalk-change_protection.patch
-ptwalk-sync_page_range.patch
-ptwalk-unuse_mm.patch
-ptwalk-map-and-unmap_vm_area.patch
-ptwalk-ioremap_page_range.patch
-ptwalk-remap_pfn_range.patch
-ptwalk-zeromap_page_range.patch
-ptwalk-unmap_page_range.patch
-ptwalk-copy_page_range.patch
-ptwalk-copy_pte_range-hang.patch
-ptwalk-clear_page_range.patch
-ptwalk-move-pd_none_or_clear_bad.patch
-ptwalk-inline-pmd_range-and-pud_range.patch
-ptwalk-pud-and-pmd-folded.patch
-vmalloc-introduce-__vmalloc_area-function.patch
-vmalloc-use-__vmalloc_area-in-arch-arm.patch
-vmalloc-use-__vmalloc_area-in-arch-sparc64.patch
-vmalloc-use-__vmalloc_area-in-arch-x86_64.patch
-vmalloc-use-list-of-pages-instead-of-array-in-vm_struct.patch
-no-arch-specific-mem_map-init.patch
-unbacked-shared-memory-not-included-in-elf-core-dump.patch
-fix-driver-name-in-sk98lin.patch
-ppc-8260-fcc-ethernet-driver-cannot-read-lxt971-phy-id.patch
-netfilter-include-fix.patch
-netfilter-snafu-fix.patch
-ppc32-update-chestnut-platform-files.patch
-ppc32-emulate-load-store-string-instructions.patch
-ppc32-remove-spr-short-hand-defines.patch
-ppc64-numa-memory-fixup.patch
-swsusp-use-non-contiguous-memory-on-resume.patch
-swsusp-use-non-contiguous-memory-on-ppc.patch
-swsusp-enable-resume-from-initrd.patch
-swsusp-do-not-provoke-emergency-disk-shutdowns.patch
-allow-admin-to-enable-only-some-of-the-magic-sysrq-functions.patch
-consolidate-debug_info.patch
-fix-warning-in-gkc-make-gconfig.patch
-module_device_tables.patch
-rol-ror-type-cleanup.patch
-config_base_full-help-clarification.patch
-selinux-needs-inet.patch
-verify_area-cleanup-drivers-part-1.patch
-verify_area-cleanup-drivers-part-2.patch
-verify_area-cleanup-sound.patch
-verify_area-cleanup-sound-fix.patch
-verify_area-cleanup-i386-and-misc.patch
-verify_area-cleanup-mips.patch
-verify_area-cleanup-ppc-ppc64-m68k-m68knommu.patch
-verify_area-cleanup-sparc-and-sparc64.patch
-verify_area-cleanup-x86_64-and-ia64.patch
-verify_area-cleanup-misc-remaining-archs.patch
-verify_area-cleanup-deprecate.patch
-arch_alpha_kernel_osf_sys-tiny-cleanup-retvalpatch.patch
-arch_alpha_kernel_osf_sys-tiny-cleanup-retvalpatch-fix.patch
-fs_compat-tiny-cleanup-retvalpatch.patch
-arch_mips_kernel_irixsig-slight-rework-of-irix_sigsendsetpatch.patch
-arch_sparc_kernel_ptrace-pointless-assignment-and-shadowed-varpatch.patch
-oprofile-make-some-code-static.patch
-update-email-address-of-andrea-arcangeli.patch
-i386-cpu-commonc-some-cleanups.patch
-i386-x86_64-io_apicc-misc-cleanups.patch
-3w-abcdh-tw_device_extension-remove-an-unused-filed.patch
-kill-aux_device_present.patch
-mostly-i386-mm-cleanup.patch
-update-email-address-of-benjamin-lahaise.patch
-update-email-address-of-philip-blundell.patch
-saa7146_vv_ksymsc-remove-two-unused-export_symbol_gpls.patch
-fix-placement-of-static-inline-in-nfsdh.patch
-mm-page-writebackc-remove-an-unused-function.patch
-misc-isapnp-cleanups.patch
-some-pnp-cleanups.patch
-make-loglevels-in-init-mainc-a-little-more-sane.patch
-isicom-use-null-for-pointer.patch
-remove-bouncing-email-address-of-hennus-bergman.patch
-i386-apic-kconfig-cleanups.patch
-remove-bouncing-email-address-of-thomas-hood.patch
-fs-adfs-dir_fc-remove-an-unused-function.patch
-drivers-char-moxac-if-0-an-unused-function.patch
-oss-sb_cardc-no-need-to-include-mcah.patch
-ioschedc-use-proper-documentation-path.patch
-small-drivers-video-kyro-cleanups.patch
-drivers-block-cpqarrayc-small-cleanups.patch
-pcxx-remove-obsolete-driver.patch
-warning-fix-in-drivers-cdrom-mcdc.patch
-wavefront-reduce-stack-usage.patch
-mm-page-writebackc-remove-an-unused-function-2.patch
-generic_serialh-kill-incorrect-gs_debug-reference.patch
-remove-the-unused-oss-maestro_tablesh.patch
-fs-hfs-misc-cleanups.patch
-fs-hfsplus-misc-cleanups.patch
-i386-math-emu-misc-cleanups.patch
-non-pc-parport-config-change.patch
-prism54-misc-cleanups.patch
-scsi-qlogicfcc-some-cleanups.patch
-scsi-qlogicispc-some-cleanups.patch
-hpet-setup-comment-fix.patch
-kill-iphase5526.patch
-i386-x86_64-acpi-sleepc-kill-unused-acpi_save_state_disk.patch
-smpbootc-cleanups.patch
-i386-kernel-i387c-misc-cleanups.patch
-mxserc-remove-unused-variable.patch
-update-panic-comment.patch
-pm3fb-remove-kernel-22-code.patch
-drivers-block-paride-cleanups.patch
-remove-obsolete-linux-resourceh-inclusion-from-asm-generic-siginfoh.patch
-fs-jffs-misc-cleanups.patch
-fs-jffs2-misc-cleanups.patch
-drivers-block-cciss-misc-cleanups.patch
-remove-unused-get_resource_list-declaration.patch
-typo-in-include-linux-compilerh.patch
-mark-blk_dev_ps2-as-broken.patch
-vsprintfc-cleanups.patch
-i386-scx200c-misc-cleanups.patch
-unexport-mmu_cr4_features.patch
-drivers-char-mxserc-cleanups.patch
-drivers-char-mwave-smapic-small-cleanups.patch
-drivers-char-specialixc-misc-cleanups.patch
-drivers-char-sysrqc-remove-the-unused-sysrq_power_off.patch
-small-partitions-msdos-cleanups.patch
-drivers-char-vt-cleanups.patch
-removes-unused-label-from-drivers-isdn-hisax-hisax_fcpcipnpc.patch
-procfs-fix-printk-arg-type-warning.patch
-isdn-fix-gcc-data-type-size-warning.patch
-w1-fix-printk-format-warning.patch
-zoran-fix-printk-format-types.patch
-hweight-typecast-return-types.patch
-i386-unexport-dmi_get_system_info.patch
-unexport-pcibios_penalize_isa_irq.patch
-list_for_each_entry-arch-i386-mm-pageattrc.patch
-gus_wavec-vfree-checking-cleanups.patch
-i386-traps-replace-schedule_timeout-with-ssleep.patch
-radio-sf16fmi-cleanup.patch
-unified-spinlock-initialization-include-linux-waith.patch
-scripts-mod-sumversionc-replace-strtok-with-strsep.patch
-char-snsc-reorder-set_current_state-and-add_wait_queue.patch
-char-hvsi-use-wait_event_timeout.patch
-char-sx-replace-schedule_timeout-with-msleep_interruptible.patch
-serial-crisv10-replace-schedule_timeout-with-msleep.patch
-ftape-fdc-io-insert-set_current_state-before-schedule_timeout.patch
-tc-zs-replace-schedule_timeout-with-msleep_interruptible.patch
-delete-unused-file-drivers_char_hp600_keybc.patch
-drivers-isdn-hardware-avm-convert-to-pci_register_driver.patch
-message-mptbase-replace-schedule_timeout-with-ssleep.patch
-drivers-message-fusion-convert-to-pci_register_driver.patch
-drivers-eisa-convert-to-pci_register_driver.patch
-char-lp-remove-interruptible_sleep_on_timeout-usage.patch
-char-istallion-replace-interruptible_sleep_on-with-wait_event_interruptible.patch
-list_for_each_entry-arch-um-drivers-chan_kernc.patch
-mips-fix-section-type-conflict-about-mpc30x.patch
-macintosh-mediabay-replace-schedule_timeout-with-msleep_interruptible.patch
-drivers-macintoshisdn-convert-to-pci_register_driver.patch
-unexport-flush_tlb_all.patch
-unexport-kmap_pteport-on-ppc.patch
-i386-power-cpuc-remove-three-unused-variables.patch

 Merged

+revert-vmalloc-use-list-of-pages-instead-of-array-in-vm_struct.patch

 Revert recent vmalloc cleanup: it breaks XFS.

+parport_pc-revert-netmos-patch.patch

 Fix parport_pc/parport_serial interaction

+uml-restore-proper-descriptions-in-make-deb-pkg-target.patch

 uml Debian packaging fix

-whitelist-entry-forcelun-for-sgs-thomson-microelectronics-cytronix-6in1-card-reader-in-scsi_devinfoc.patch

 Dropped on advice from the scsi guys.

+usb-support-for-new-ipod-mini-and-possibly-others.patch

 usb device support

+slab-64bit-fix.patch

 slab fixlet

+sparsemem-base-teach-discontig-about-sparse-ranges.patch
+sparsemem-base-simple-numa-remap-space-allocator.patch
+sparsemem-base-reorganize-page-flags-bit-operations.patch
+sparsemem-base-early_pfn_to_nid-works-before-sparse-is-initialized.patch

 Preparatory work for the "sparse memory" feature: mainly for discontiguous
 memory within NUMA nodes.

+vmscan-move-code-to-isolate-lru-pages-into-separate-function.patch

 vmscan code consolidation

+mm-counter-operations-through-macros.patch
+mm-counter-operations-through-macros-tidy.patch

 Some preparatory work for improving scalability of mm_struct counters

-b44-bounce-buffer-fix.patch
+b44-allocate-tx-bounce-bufs-as-needed.patch

 New version of this (I think)

+drivers-net-sis900c-fix-a-warning.patch
+fix-suspend-resume-on-via-velocity.patch
+pcnet32-bug-79c975-fiber-fix.patch
+we-18-aka-wpa.patch

 Net stuff

+ppc32-fix-powermac-cpufreq-for-newer-machines.patch
+ppc32-fix-overflow-in-cpuinfo-freq-display.patch
+ppc32-update-powermac-models-table.patch
+ppc32-add-virtual-dma-support-to-legacy-floppy-driver-on.patch
+ppc32-fix-a-warning-in-planb-video-driver.patch
+ppc32-delete-arch-ppc-syslib-ppc4xx_serialc.patch
+ppc32-lindent-include-asm-ppc-dmah.patch
+ppc32-better-comment-arch-ppc-syslib-cpc700h.patch
+ppc32-serial-fix-for-pal4.patch
+ppc32-fix-a-typo-on-8260.patch
+ppc32-update-8260_io-fcc_enetc-to-function-again.patch
+ppc32-patch-for-changed-dev-bus_id-format.patch
+ppc32-update-radstone-ppc7d-platform.patch
+ppc32-clean-up-mv64x60-bootwrapper-support.patch
+ppc32-fix-fec-ethernet-intialization-on-mpc8540-ads-board.patch
+ppc32-sparse-clean-ups-for-the-freescale-mpc52xx-related-code.patch
+ppc32-add-pci-bus-support-for-freescale-mpc52xx.patch

 ppc32 updates

+ppc64-rtasd-shouldnt-hold-cpucontrol-while-sleeping.patch
+ppc64-fix-kprobes-calling-smp_processor_id-when-preemptible.patch
+ppc64-kill-might_sleep-warnings-in-__copy__user_inatomic.patch
+ppc64-make-rtas-code-usable-on-non-pseries-machines.patch
+ppc64-delete-unused-file-no_initrdc.patch
+ppc64-delete-unused-file-iseries_fixuph.patch
+ppc64-iseries-cleanup-viopath.patch
+ppc64-iseries-cleanup-iseries_setup.patch

 ppc64 udpates

+via-irq-fixup-fix.patch
+via-irq-fixup-fix-warning-fix.patch

 Fiddle with VIA IRQ routing

+apm-fix-interrupts-enabled-in-device_power_up.patch
+rtc_lock-is-irq-safe.patch

 x86 locking fixes

+fix-put_user-for-80386.patch

 put_user() 386 workarounds

+es7000-legacy-mappings-update.patch

 es7000 fix

+x86-fix-esp-corruption-cpu-bug-take-2.patch

 Work around x86 bug when using 16-bit stack segments

+es7000-dmi-cleanup.patch

 x86 cleanup

+x86-x86_64-reading-deterministic-cache-parameters-and-exporting-it-in-sysfs.patch

 Improved reporting for Intel x86/x86_64 CPU info

+x86-x86_64-intel-dual-core-detection.patch

 Improved Intel x86/x86_64 CPU type detection

+x86-cacheline-alignment-for-cpu-maps.patch

 Align a few cpumasks.

+x86-64-kprobes-handle-%rip-relative-addressing-mode.patch

 kprobes fix

+swsusp-add-missing-refrigerator-calls.patch

 swsusp fixes

+uml-cope-with-uml_net-security-fix.patch

 uml_net fix

+areca-raid-linux-scsi-driver.patch

 Updated version of this driver.

+cfq-iosched-update-to-time-sliced-design-use-bio_data_dir.patch

 cfq3 fix

+use-__init-and-__exit-in-pktcdvd.patch

 Linker section fix

+dvd-ram-support-for-pktcdvd.patch

 Packet driver update

+break_lock-fix-2.patch

 Fix spinlock breaking code

+cdrom-cdu31a-cleanups.patch
+cdrom-cdu31a-locking-fixes.patch
+cdrom-cdu31a-use-wait_event.patch

 cdrom driver updates

+revert-gconfig-changes.patch

 Back out a recent change which broke gconfig.

+enable-gcc-warnings-for-vsprintf-vsnprintf-with-format-attribute.patch

 Additional printf-style arg checking

+w6692-eliminate-bad-section-references.patch
+teles3-eliminate-bad-section-references.patch
+elsa-eliminate-bad-section-references.patch
+hfc_sx-eliminate-bad-section-references.patch
+sedlbauer-eliminate-bad-section-references.patch

 Various linkage section fixes

+fix-mprotect-with-len=size_t-1-to-return-enomem.patch

 Make mprotect() more posixly correct

+checkstack-fix-sort-misbehavior-for-long-function-names.patch

 checkstack.pl fix

+fix-irq_affinity-write-from-proc-for-ia64.patch

 ia64 IRQ affinity writing fix

+fix-mmap-return-value-to-conform-posix.patch

 Make mmap() more posixly correct

+exports-to-enable-clock-driver-modules.patch

 Allow mmtimer to be a module

+per-cpu-irq-stat.patch

 per-cpuify the x86 irq_stat structures

+kill-drivers-cdrom-mcdc.patch

 Remove a cdrom driver

+drivers-char-isicomc-gcc4-fix.patch
+drivers-net-arcnet-arcnetc-gcc4-fixes.patch
+drivers-net-depcac-gcc4-fix.patch

 gcc-4.0 fixes

+infiniband-remove-unsafe-use-of-in_atomic.patch

 in_atomic() doesn't do what you think it does.

+new-console-flag-con_boot.patch
+new-console-flag-con_boot-comment.patch

 Permit early console drivers to be auto-ejected when the real ones are
 registered.

+pipe-save-one-pipe-page.patch

 Use less memory in the pipe code.

+kprobes-incorrect-spin_unlock_irqrestore-call-in-register_kprobe.patch

 kprobes locking fix

+ext3-writeback-nobh-option.patch

 Add a `no buffer-head' option to ext3's data pages in witeback mode.

+add-gfp_mask-to-page-owner.patch

 Enhance the reporting in the page memory leak detector patch.

+slab-leak-detector.patch
+slab-leak-detector-warning-fixes.patch

 Re-add Manfred's slab leak detector.

+figure-out-who-is-inserting-bogus-modules-warning-fix.patch

 Fix a warning in figure-out-who-is-inserting-bogus-modules.patch

+releasing-resources-with-children.patch

 Debug check

+perfctr-api-update-1-9-physical-indexing-x86.patch
+perfctr-api-update-2-9-physical-indexing-ppc32.patch
+perfctr-api-update-3-9-cpu_control_header-x86.patch
+perfctr-api-update-4-9-cpu_control_header-ppc32.patch
+perfctr-api-update-5-9-cpu_control_header-common.patch
+perfctr-api-update-6-9-cpu_control-access-common.patch
+perfctr-api-update-7-9-cpu_control-access-x86.patch
+perfctr-api-update-8-9-cpu_control-access-ppc32.patch
+perfctr-api-update-9-9-domain-based-read-write-syscalls.patch
+perfctr-ia32-syscalls-on-x86-64-fix.patch

 perfctr API update and a fix

+reiser4-update.patch

 reiser4fs update

+fbcon-stop-framebuffer-operations-before-hardware-is-properly-initialized.patch
+nvidiafb-maximize-blit-buffer-capacity.patch
+pm2fb-x-and-vt-switching-crash-fix.patch
+nvidiafb-kconfig-help-text-update-for-config-fb_nvidia.patch
+fbdev-cleanups-in-drivers-video-part-2.patch
+excessive-atyfb-debug-messages.patch
+atyfb-add-boot-module-option-to-override-composite-sync.patch
+fbdev-kconfig-fix-for-macmodes-and-ppc.patch
+fbdev-convert-drivers-to-pci_register_driver.patch
+sisfb-trivial-cleanups.patch
+tridentfb-clean-up-printks.patch
+sisusb-fix-arg-types.patch
+s1d13xxxfb-add-support-for-epson-s1d13806-fb.patch
+matroxfb-compile-error.patch

 fbdev driver updates

+drivers-isdn-divert-isdn_divertc-make-5-functions-static.patch
+drivers-isdn-capi-make-some-code-static.patch

 Make a few things static

+drivers-media-video-tvaudioc-make-some-variables-static.patch
+drivers-isdn-sc-possible-cleanups.patch
+drivers-isdn-pcbit-possible-cleanups.patch
+drivers-isdn-i4l-possible-cleanups.patch
+unexport-mca_find_device_by_slot.patch
+drivers-isdn-hardware-avm-misc-cleanups.patch
+drivers-isdn-act2000-capic-if-0-an-unused-function.patch
+pwc-fix-printk-arg-types.patch
+tpm-fix-gcc-printk-warnings.patch
+x86-64-add-memcpy-memset-prototypes.patch
+au1100fb-convert-to-c99-inits.patch
+reiserfs-use-null-instead-of-0.patch
+comments-on-locking-of-task-comm.patch

 Little code tweaks.




number of patches in -mm: 501
number of changesets in external trees: 378
number of patches in -mm only: 481
total patches: 859




All 501 patches:


linus.patch

revert-vmalloc-use-list-of-pages-instead-of-array-in-vm_struct.patch
  revert vmalloc-use-list-of-pages-instead-of-array-in-vm_struct

tty-overrun-time-fix.patch
  tty overrun time fix

parport_pc-revert-netmos-patch.patch
  parport_pc: partially revert netmos patch

ia64-msi-warning-fixes.patch
  ia64 msi warning fixes

ia64-config_apci_numa-fix.patch
  ia64 CONFIG_APCI_NUMA fix

bk-acpi.patch

bk-acpi-acpi_pci_irq_disable-build-fix.patch
  bk-acpi-acpi_pci_irq_disable build fix

acpi-toshiba-failure-handling.patch
  acpi: Toshiba failure handling

acpi-video-pointer-size-fix.patch
  acpi video pointer size fix

acpi-poweroff-fix.patch
  ACPI poweroff fix

acpi-poweroff-fix-fix.patch
  acpi-poweroff-fix fix

agp-make-some-code-static.patch
  AGP: make some code static

include-linux-soundcardh-endianness-fix.patch
  include/linux/soundcard.h: endianness fix

bk-arm.patch

bk-audit.patch

bk-cifs.patch

bk-cpufreq.patch

bk-driver-core.patch

bk-drm.patch

bk-drm-via.patch

bk-i2c.patch

bk-ia64.patch

ide-hdiotxt-update.patch
  ide: hdio.txt update

ide-serverworks-fix-section-references.patch
  ide/serverworks: fix section references

bk-ieee1394.patch

bk-input.patch

bk-kbuild.patch

uml-make-deb-pkg-build-target-build-a-debian-style-user-mode-linux-package.patch
  uml: make deb-pkg build target build a Debian-style user-mode-linux package

uml-restore-proper-descriptions-in-make-deb-pkg-target.patch
  UML - Restore proper descriptions in make deb-pkg target

bk-netdev.patch

bk-ntfs.patch

arch-i386-pci-i386c-use-new-for_each_pci_dev-macro.patch
  arch/i386/pci/i386.c: Use new for_each_pci_dev macro

pci-be-more-verbose-in-gen-devlist.patch
  pci: be more verbose in gen-devlist

bk-scsi.patch

megaraid_sas-announcing-new-module-for.patch
  megaraid_sas: Announcing new module for LSI Logic's SAS based MegaRAID controllers

open-iscsi-scsi.patch
  open-iscsi-scsi

open-iscsi-headers.patch
  open-iscsi-headers

open-iscsi-kconfig.patch
  open-iscsi-kconfig

open-iscsi-makefile.patch
  open-iscsi-makefile

open-iscsi-netlink.patch
  open-iscsi-netlink

open-iscsi-doc.patch
  open-iscsi-doc

add-scsi-changer-driver.patch
  add scsi changer driver

scsi-ch-build-fix.patch
  scsi ch.c build fix

bk-usb.patch

zd1201-build-fix.patch
  zd1201 build fix

usb-hcd-u64-warning-fix.patch
  usb hcd u64 warning fix

usb-support-for-new-ipod-mini-and-possibly-others.patch
  usb: support for new ipod mini (and possibly others)

bk-watchdog.patch

bk-xfs.patch

mm.patch
  add -mmN to EXTRAVERSION

fix-help-for-acpi_container.patch
  Fix help for ACPI_CONTAINER

swapspace-layout-improvements.patch
  swapspace-layout-improvements
  /proc/swaps negative Used

bdi-provide-backing-device-capability-information.patch
  BDI: Provide backing device capability information [try #3]

cpusets-big-numa-cpu-and-memory-placement-backing_dev-fix.patch
  cpusets-big-numa-cpu-and-memory-placement-backing_dev-fix

add-a-clear_pages-function-to-clear-pages-of-higher.patch
  add a clear_pages function to clear pages of higher order

slab-kmalloc-cleanups.patch
  slab.[ch]: kmalloc() cleanups

slab-64bit-fix.patch
  slab: 64-bit fix

sparsemem-base-teach-discontig-about-sparse-ranges.patch
  sparsemem base: teach discontig about sparse ranges

sparsemem-base-simple-numa-remap-space-allocator.patch
  sparsemem base: simple NUMA remap space allocator

sparsemem-base-reorganize-page-flags-bit-operations.patch
  sparsemem base: reorganize page->flags bit operations

sparsemem-base-early_pfn_to_nid-works-before-sparse-is-initialized.patch
  sparsemem base: early_pfn_to_nid() (works before sparse is initialized)

vmscan-move-code-to-isolate-lru-pages-into-separate-function.patch
  vmscan: move code to isolate LRU pages into separate function

mm-counter-operations-through-macros.patch
  mm counter operations through macros

mm-counter-operations-through-macros-tidy.patch
  mm-counter-operations-through-macros-tidt

b44-allocate-tx-bounce-bufs-as-needed.patch
  b44: allocate tx bounce bufs as needed

eni155p-error-handling-fix.patch
  ENI155P error handling fix

drivers-net-myri_codeh-cleanup.patch
  drivers/net/myri_code.h cleanup

e100-napi-fixes.patch
  e100: NAPI fixes

remove-last_rx-update-from-loopback-device.patch
  remove last_rx update from loopback device

fix-pci_disable_device-in-8139too.patch
  fix pci_disable_device in 8139too

log-full-of-ing_filter-fixed-ippp2-out-ippp2.patch
  Log full of "ing_filter:  fixed  ippp2 out ippp2"

a-new-10gb-ethernet-driver-by-chelsio-communications.patch
  A new 10GB Ethernet Driver by Chelsio Communications

bonding-needs-inet.patch
  bonding needs inet

drivers-net-sis900c-fix-a-warning.patch
  drivers/net/sis900.c: fix a warning

fix-suspend-resume-on-via-velocity.patch
  Fix suspend/resume on via-velocity

pcnet32-bug-79c975-fiber-fix.patch
  pcnet32 79C975 fiber fix

we-18-aka-wpa.patch
  WE-18 (aka WPA)

ppc32-fix-powermac-cpufreq-for-newer-machines.patch
  ppc32: Fix PowerMac cpufreq for newer machines

ppc32-fix-overflow-in-cpuinfo-freq-display.patch
  ppc32: Fix overflow in cpuinfo freq. display

ppc32-update-powermac-models-table.patch
  ppc32: Update PowerMac models table

ppc32-add-virtual-dma-support-to-legacy-floppy-driver-on.patch
  ppc32: Add virtual DMA support to legacy floppy driver

ppc32-fix-a-warning-in-planb-video-driver.patch
  ppc32: Fix a warning in planb video driver

ppc32-delete-arch-ppc-syslib-ppc4xx_serialc.patch
  ppc32: Delete arch/ppc/syslib/ppc4xx_serial.c

ppc32-lindent-include-asm-ppc-dmah.patch
  ppc32: Lindent include/asm-ppc/dma.h

ppc32-better-comment-arch-ppc-syslib-cpc700h.patch
  ppc32: Better comment arch/ppc/syslib/cpc700.h

ppc32-serial-fix-for-pal4.patch
  ppc32: Serial fix for PAL4

ppc32-fix-a-typo-on-8260.patch
  ppc32: Fix a typo on 8260

ppc32-update-8260_io-fcc_enetc-to-function-again.patch
  ppc32: Update 8260_io/fcc_enet.c to function again

ppc32-patch-for-changed-dev-bus_id-format.patch
  ppc32: Patch for changed dev->bus_id format

ppc32-update-radstone-ppc7d-platform.patch
  ppc32: update Radstone ppc7d platform

ppc32-clean-up-mv64x60-bootwrapper-support.patch
  ppc32: Clean up mv64x60 bootwrapper support

ppc32-fix-fec-ethernet-intialization-on-mpc8540-ads-board.patch
  ppc32: Fix FEC ethernet intialization on MPC8540 ADS board

ppc32-sparse-clean-ups-for-the-freescale-mpc52xx-related-code.patch
  ppc32: sparse clean ups for the Freescale MPC52xx related code

ppc32-add-pci-bus-support-for-freescale-mpc52xx.patch
  ppc32: Add PCI bus support for Freescale MPC52xx

ppc64-rtasd-shouldnt-hold-cpucontrol-while-sleeping.patch
  ppc64: rtasd shouldn't hold cpucontrol while sleeping

ppc64-fix-kprobes-calling-smp_processor_id-when-preemptible.patch
  ppc64: fix kprobes calling smp_processor_id when preemptible

ppc64-kill-might_sleep-warnings-in-__copy__user_inatomic.patch
  ppc64: kill might_sleep() warnings in __copy_*_user_inatomic

ppc64-make-rtas-code-usable-on-non-pseries-machines.patch
  ppc64: make RTAS code usable on non-pSeries machines

ppc64-delete-unused-file-no_initrdc.patch
  ppc64: delete unused file no_initrd.c

ppc64-delete-unused-file-iseries_fixuph.patch
  ppc64: delete unused file iSeries_fixup.h

ppc64-iseries-cleanup-viopath.patch
  ppc64 iSeries: cleanup viopath

ppc64-iseries-cleanup-iseries_setup.patch
  ppc64 iSeries: cleanup iSeries_setup

x86-reduce-cacheline-bouncing-in-cpu_idle_wait.patch
  x86: reduce cacheline bouncing in cpu_idle_wait

x86-cmos-time-update-optimisation.patch
  x86: CMOS time update optimisation

x86-cmos-time-update-optimisation-tidy.patch
  x86-cmos-time-update-optimisation-tidy

x86-cmos-time-update-optimisation-locking-fix.patch
  x86-cmos-time-update-optimisation locking fix

via-irq-fixup-fix.patch
  VIA irq fixup fix

via-irq-fixup-fix-warning-fix.patch
  via-irq-fixup-fix-warning-fix

apm-fix-interrupts-enabled-in-device_power_up.patch
  APM: fix interrupts enabled in device_power_up

rtc_lock-is-irq-safe.patch
  rtc_lock is irq-safe

fix-put_user-for-80386.patch
  fix put_user for 80386

es7000-legacy-mappings-update.patch
  ES7000 Legacy Mappings Update

x86-fix-esp-corruption-cpu-bug-take-2.patch
  x86: fix ESP corruption CPU bug (take 2)

es7000-dmi-cleanup.patch
  es7000 dmi cleanup

x86-x86_64-reading-deterministic-cache-parameters-and-exporting-it-in-sysfs.patch
  x86, x86_64: reading deterministic cache parameters and exporting it in /sysfs

x86-x86_64-intel-dual-core-detection.patch
  x86, x86_64: Intel dual-core detection

x86-cacheline-alignment-for-cpu-maps.patch
  x86: cacheline alignment for cpu maps

x86-64-kconfig-typo-trivial.patch
  x86-64: kconfig typo

x86_64-remove-old-decl-trivial.patch
  x86_64: remove old decl (trivial)

x86_64-avoid-panic-lockup.patch
  x86_64: avoid panic lockup

x86_64-hugetlb-fix.patch
  x86_64: hugetlb fix

x86-64-forgot-asmlinkage-on-sys_mmap.patch
  x86-64: forgot asmlinkage on sys_mmap

x86_64-reduce-cacheline-bouncing-in-cpu_idle_wait.patch
  x86_64: reduce cacheline bouncing in cpu_idle_wait

x86_64-reduce-cacheline-bouncing-in-cpu_idle_wait-warning-fix.patch
  x86_64-reduce-cacheline-bouncing-in-cpu_idle_wait-warning-fix

x86-64-kprobes-handle-%rip-relative-addressing-mode.patch
  x86-64 kprobes: handle %RIP-relative addressing mode

x86_64-dump-stack-in-early-exception.patch
  x86_64-dump-stack-in-early-exception

ia64-reduce-cacheline-bouncing-in-cpu_idle_wait.patch
  ia64: reduce cacheline bouncing in cpu_idle_wait

ia64-reduce-cacheline-bouncing-in-cpu_idle_wait-fix.patch
  ia64-reduce-cacheline-bouncing-in-cpu_idle_wait fix

swsusp-add-missing-refrigerator-calls.patch
  swsusp: Add missing refrigerator calls

uml-cope-with-uml_net-security-fix.patch
  uml: cope with uml_net security fix

make-sysrq-f-call-oom_kill.patch
  make sysrq-F call oom_kill()

sort-out-pci_rom_address_enable-vs-ioresource_rom_enable.patch
  Sort out PCI_ROM_ADDRESS_ENABLE vs IORESOURCE_ROM_ENABLE

mtrr-size-and-base-debug.patch
  mtrr size-and-base debugging

cant-unmount-bad-inode.patch
  Can't unmount bad inode

iounmap-debugging.patch
  iounmap debugging

detect-soft-lockups.patch
  detect soft lockups

detect-soft-lockups-from-touch_nmi_watchdog.patch
  detect-soft-lockups: call from touch_nmi_watchdog

areca-raid-linux-scsi-driver.patch
  ARECA RAID Linux scsi driver

rt-lsm.patch
  RT-LSM

tty-output-lossage-fix.patch
  tty output lossage fix

blockdev-fixes-race-between-mount-umount.patch
  blockdev: fixes race between mount/umount

cx24110-conexant-frontend-update.patch
  cx24110 Conexant Frontend update

nice-and-rt-prio-rlimits.patch
  nice and rt-prio rlimits

relayfs.patch
  relayfs

relayfs-backing_dev-fix.patch
  relayfs-backing_dev-fix

cfq-iosched-update-to-time-sliced-design.patch
  cfq-iosched: update to time sliced design

cfq-iosched-update-to-time-sliced-design-export-task_nice.patch
  cfq-iosched-update-to-time-sliced-design-export-task_nice

cfq-iosched-update-to-time-sliced-design-fix.patch
  cfq-iosched-update-to-time-sliced-design fix

cfq-iosched-update-to-time-sliced-design-fix-fix.patch
  cfq-iosched-update-to-time-sliced-design-fix-fix

cfq-iosched-update-to-time-sliced-design-use-bio_data_dir.patch
  cfq-iosched-update-to-time-sliced-design: use bio_data_dir()

keys-discard-key-spinlock-and-use-rcu-for-key-payload.patch
  keys: Discard key spinlock and use RCU for key payload

keys-discard-key-spinlock-and-use-rcu-for-key-payload-try-4.patch
  keys: Discard key spinlock and use RCU for key payload - try #4

stallion-driver-module-clean-up.patch
  Stallion driver module clean up

use-__init-and-__exit-in-pktcdvd.patch
  Use __init and __exit in pktcdvd

dvd-ram-support-for-pktcdvd.patch
  DVD-RAM support for pktcdvd

break_lock-fix-2.patch
  break_lock fix

cdrom-cdu31a-cleanups.patch
  cdrom/cdu31a: cleanups

cdrom-cdu31a-locking-fixes.patch
  cdrom/cdu31a: locking fixes

cdrom-cdu31a-use-wait_event.patch
  cdrom/cdu31a: use wait_event

revert-gconfig-changes.patch
  revert recent gconfig changes

enable-gcc-warnings-for-vsprintf-vsnprintf-with-format-attribute.patch
  Enable gcc warnings for vsprintf/vsnprintf with "format" attribute

w6692-eliminate-bad-section-references.patch
  w6692: eliminate bad section references

teles3-eliminate-bad-section-references.patch
  teles3: eliminate bad section references

elsa-eliminate-bad-section-references.patch
  elsa eliminate bad section references

hfc_sx-eliminate-bad-section-references.patch
  hfc_sx: eliminate bad section references

sedlbauer-eliminate-bad-section-references.patch
  sedlbauer: eliminate bad section references

fix-mprotect-with-len=size_t-1-to-return-enomem.patch
  fix mprotect() with len=(size_t)(-1) to return -ENOMEM

checkstack-fix-sort-misbehavior-for-long-function-names.patch
  checkstack: fix sort misbehavior for long function names

fix-irq_affinity-write-from-proc-for-ia64.patch
  Fix irq_affinity write from /proc for ia64

fix-mmap-return-value-to-conform-posix.patch
  fix mmap() return value to conform POSIX

exports-to-enable-clock-driver-modules.patch
  Exports to enable clock driver modules

per-cpu-irq-stat.patch
  Per cpu irq stat

kill-drivers-cdrom-mcdc.patch
  kill drivers/cdrom/mcd.c

drivers-char-isicomc-gcc4-fix.patch
  drivers/char/isicom.c gcc4 fix

drivers-net-arcnet-arcnetc-gcc4-fixes.patch
  drivers/net/arcnet/arcnet.c gcc4 fixes

drivers-net-depcac-gcc4-fix.patch
  drivers/net/depca.c gcc4 fix

infiniband-remove-unsafe-use-of-in_atomic.patch
  InfiniBand: remove unsafe use of in_atomic()

new-console-flag-con_boot.patch
  New console flag: CON_BOOT

new-console-flag-con_boot-comment.patch
  new-console-flag-con_boot-comment

pipe-save-one-pipe-page.patch
  pipe: save one pipe page

kprobes-incorrect-spin_unlock_irqrestore-call-in-register_kprobe.patch
  kprobes: incorrect spin_unlock_irqrestore() call in register_kprobe()

inotify.patch
  inotify

inotify-fix.patch
  inotify-fix

ext3-jbd-race-releasing-in-use-journal_heads.patch
  ext3/jbd race: releasing in-use journal_heads

ext3-writepages-support-for-writeback-mode.patch
  ext3 writepages support for writeback mode

ext3-writeback-nobh-option.patch
  ext3 writeback "nobh" option

pcmcia-dont-send-eject-request-events-to-userspace.patch
  pcmcia: don't send eject request events to userspace

pcmcia-hotplug-event-for-pcmcia-devices.patch
  pcmcia: hotplug event for PCMCIA devices

pcmcia-hotplug-event-for-pcmcia-socket-devices.patch
  pcmcia: hotplug event for PCMCIA socket devices

pcmcia-device-and-driver-matching.patch
  pcmcia: device and driver matching

pcmcia-check-for-invalid-crc32-hashes-in-id_tables.patch
  pcmcia: check for invalid crc32 hashes in id_tables

pcmcia-match-for-fake-cis.patch
  pcmcia: match for fake CIS

pcmcia-export-cis-in-sysfs.patch
  pcmcia: export CIS in sysfs

pcmcia-cis-overrid-via-sysfs.patch
  pcmcia: CIS overrid via sysfs

pcmcia-match-anonymous-cards.patch
  pcmcia: match "anonymous" cards

pcmcia-allow-function-id-based-match.patch
  pcmcia: allow function-ID based match

pcmcia-file2alias.patch
  pcmcia: file2alias

pcmcia-request-cis-via-firmware-interface.patch
  pcmcia: request CIS via firmware interface

pcmcia-cleanups.patch
  pcmcia: cleanups

pcmcia-rescan-bus-always-upon-echoing-into-setup_done.patch
  pcmcia: rescan bus always upon echoing into setup_done

pcmcia-id_table-for-serial_cs.patch
  pcmcia: id_table for serial_cs

pcmcia-id_table-for-3c574_cs.patch
  pcmcia: id_table for 3c574_cs

pcmcia-id_table-for-3c589_cs.patch
  pcmcia: id_table for 3c589_cs

pcmcia-id_table-for-aha152x.patch
  pcmcia: id_table for aha152x

pcmcia-id_table-for-airo_cs.patch
  pcmcia: id_table for airo_cs

pcmcia-id_table-for-axnet_cs.patch
  pcmcia: id_table for axnet_cs

pcmcia-id_table-for-fdomain_stub.patch
  pcmcia: id_table for fdomain_stub

pcmcia-id_table-for-fmvj18x_cs.patch
  pcmcia: id_table for fmvj18x_cs

pcmcia-id_table-for-ibmtr_cs.patch
  pcmcia: id_table for ibmtr_cs

pcmcia-id_table-for-netwave_cs.patch
  pcmcia: id_table for netwave_cs

pcmcia-id_table-for-nmclan_cs.patch
  pcmcia: id_table for nmclan_cs

pcmcia-id_table-for-teles_cs.patch
  pcmcia: id_table for teles_cs

pcmcia-id_table-for-ray_cs.patch
  pcmcia: id_table for ray_cs

pcmcia-id_table-for-wavelan_cs.patch
  pcmcia: id_table for wavelan_cs

pcmcia-id_table-for-sym53c500_csc.patch
  pcmcia: id_table for sym53c500_cs.c

pcmcia-id_table-for-qlogic_stubc.patch
  pcmcia: id_table for qlogic_stub.c

pcmcia-id_table-for-smc91c92_csc.patch
  pcmcia: id_table for smc91c92_cs.c

pcmcia-id_table-for-orinoco_cs.patch
  pcmcia: id_table for orinoco_cs

pcmcia-id_table-for-xirc2ps_csc.patch
  pcmcia: id_table for xirc2ps_cs.c

pcmcia-id_table-for-ide_csc.patch
  pcmcia: id_table for ide_cs.c

pcmcia-id_table-for-parport_csc.patch
  pcmcia: id_table for parport_cs.c

pcmcia-id_table-for-pcnet_csc.patch
  pcmcia: id_table for pcnet_cs.c

pcmcia-id_table-for-pcmciamtdc.patch
  pcmcia: id_table for pcmciamtd.c

pcmcia-id_table-for-vxpocketc.patch
  pcmcia: id_table for vxpocket.c

pcmcia-id_table-for-atmel_csc.patch
  pcmcia: id_table for atmel_cs.c

pcmcia-id_table-for-avma1_csc.patch
  pcmcia: id_table for avma1_cs.c

pcmcia-id_table-for-avm_csc.patch
  pcmcia: id_table for avm_cs.c

pcmcia-id_table-for-bluecard_csc.patch
  pcmcia: id_table for bluecard_cs.c

pcmcia-id_table-for-bt3c_csc.patch
  pcmcia: id_table for bt3c_cs.c

pcmcia-id_table-for-btuart_csc.patch
  pcmcia: id_table for btuart_cs.c

pcmcia-id_table-for-com20020_csc.patch
  pcmcia: id_table for com20020_cs.c

pcmcia-id_table-for-dtl1_csc.patch
  pcmcia: id_table for dtl1_cs.c

pcmcia-id_table-for-elsa_csc.patch
  pcmcia: id_table for elsa_cs.c

pcmcia-id_table-for-ixj_pcmciac.patch
  pcmcia: id_table for ixj_pcmcia.c

pcmcia-id_table-for-nsp_csc.patch
  pcmcia: id_table for nsp_cs.c

pcmcia-id_table-for-sedlbauer_csc.patch
  pcmcia: id_table for sedlbauer_cs.c

pcmcia-id_table-for-wl3501_csc.patch
  pcmcia: id_table for wl3501_cs.c

pcmcia-id_table-for-pdaudiocfc.patch
  pcmcia: id_table for pdaudiocf.c

pcmcia-id_table-for-synclink_csc.patch
  pcmcia: id_table for synclink_cs.c

nfsacl-solaris-nfsacl-workaround.patch
  nfsacl: Solaris nfsacl workaround

kgdb-ga.patch
  kgdb stub for ia32 (George Anzinger's one)
  kgdbL warning fix
  kgdb buffer overflow fix
  kgdbL warning fix
  kgdb: CONFIG_DEBUG_INFO fix
  x86_64 fixes
  correct kgdb.txt Documentation link (against  2.6.1-rc1-mm2)
  kgdb: fix for recent gcc
  kgdb warning fixes
  THREAD_SIZE fixes for kgdb
  Fix stack overflow test for non-8k stacks
  kgdb-ga.patch fix for i386 single-step into sysenter
  fix TRAP_BAD_SYSCALL_EXITS on i386
  add TRAP_BAD_SYSCALL_EXITS config for i386
  kgdb-is-incompatible-with-kprobes
  kgdb-ga-build-fix
  kgdb-ga-fixes
  kgdb: kill off highmem_start_page
  kgdb documentation fix

kgdb-x86-config_debug_info-fix.patch
  kgdb CONFIG_DEBUG_INFO fix

kgdboe-netpoll.patch
  kgdb-over-ethernet via netpoll
  kgdboe: fix configuration of MAC address

kgdb-x86_64-support.patch
  kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
  kgdb-x86_64-warning-fixes
  kgdb-x86_64-fix
  kgdb-x86_64-serial-fix
  kprobes exception notifier fix

kgdb-x86_64-config_debug_info-fix.patch
  kgdb CONFIG_DEBUG_INFO fix

journal_add_journal_head-debug.patch
  journal_add_journal_head-debug

list_del-debug.patch
  list_del debug check

page-owner-tracking-leak-detector.patch
  Page owner tracking leak detector

make-page_owner-handle-non-contiguous-page-ranges.patch
  make page_owner handle non-contiguous page ranges

add-gfp_mask-to-page-owner.patch
  add gfp_mask to page owner

unplug-can-sleep.patch
  unplug functions can sleep

firestream-warnings.patch
  firestream warnings

periodically-scan-redzone-entries-and-slab-control-structures.patch
  periodically scan redzone entries and slab control structures

slab-leak-detector.patch
  slab leak detector

slab-leak-detector-warning-fixes.patch
  slab leak detector warning fixes

irqpoll.patch
  irqpoll

figure-out-who-is-inserting-bogus-modules.patch
  Figure out who is inserting bogus modules

figure-out-who-is-inserting-bogus-modules-warning-fix.patch
  Warning fix and be extra careful about array in kernel/module.c

releasing-resources-with-children.patch
  Releasing resources with children

perfctr-core.patch
  perfctr: core
  perfctr: remove bogus perfctr_sample_thread() calls

perfctr-i386.patch
  perfctr: i386

perfctr-x86-core-updates.patch
  perfctr x86 core updates

perfctr-x86-driver-updates.patch
  perfctr x86 driver updates

perfctr-x86-driver-cleanup.patch
  perfctr: x86 driver cleanup

perfctr-prescott-fix.patch
  Prescott fix for perfctr

perfctr-x86-update-2.patch
  perfctr x86 update 2

perfctr-x86_64.patch
  perfctr: x86_64

perfctr-x86_64-core-updates.patch
  perfctr x86_64 core updates

perfctr-ppc.patch
  perfctr: PowerPC

perfctr-ppc32-driver-update.patch
  perfctr: ppc32 driver update

perfctr-ppc32-mmcr0-handling-fixes.patch
  perfctr ppc32 MMCR0 handling fixes

perfctr-ppc32-update.patch
  perfctr ppc32 update

perfctr-ppc32-update-2.patch
  perfctr ppc32 update

perfctr-virtualised-counters.patch
  perfctr: virtualised counters

perfctr-remap_page_range-fix.patch

virtual-perfctr-illegal-sleep.patch
  virtual perfctr illegal sleep

make-perfctr_virtual-default-in-kconfig-match-recommendation.patch
  Make PERFCTR_VIRTUAL default in Kconfig match recommendation  in help text

perfctr-ifdef-cleanup.patch
  perfctr ifdef cleanup

perfctr-update-2-6-kconfig-related-updates.patch
  perfctr: Kconfig-related updates

perfctr-virtual-updates.patch
  perfctr virtual updates

perfctr-virtual-cleanup.patch
  perfctr: virtual cleanup

perfctr-ppc32-preliminary-interrupt-support.patch
  perfctr ppc32 preliminary interrupt support

perfctr-update-5-6-reduce-stack-usage.patch
  perfctr: reduce stack usage

perfctr-interrupt-support-kconfig-fix.patch
  perfctr interrupt_support Kconfig fix

perfctr-low-level-documentation.patch
  perfctr low-level documentation

perfctr-inheritance-1-3-driver-updates.patch
  perfctr inheritance: driver updates

perfctr-inheritance-2-3-kernel-updates.patch
  perfctr inheritance: kernel updates

perfctr-inheritance-3-3-documentation-updates.patch
  perfctr inheritance: documentation updates

perfctr-inheritance-locking-fix.patch
  perfctr inheritance locking fix

perfctr-api-changes-first-step.patch
  perfctr API changes: first step

perfctr-virtual-update.patch
  perfctr virtual update

perfctr-x86-64-ia32-emulation-fix.patch
  perfctr x86-64 ia32 emulation fix

perfctr-sysfs-update-1-4-core.patch
  perfctr sysfs update: core

perfctr-sysfs-update.patch
  Perfctr sysfs update

perfctr-sysfs-update-2-4-x86.patch
  perfctr sysfs update: x86

perfctr-sysfs-update-3-4-x86-64.patch
  perfctr sysfs update: x86-64
  perfctr: syscall numbers in x86-64 ia32-emulation
  perfctr x86_64 native syscall numbers fix

perfctr-sysfs-update-4-4-ppc32.patch
  perfctr sysfs update: ppc32

perfctr-2710-api-update-1-4-common.patch
  perfctr-2.7.10 API update 1/4: common

perfctr-2710-api-update-2-4-i386.patch
  perfctr-2.7.10 API update 2/4: i386

perfctr-2710-api-update-3-4-x86_64.patch
  perfctr-2.7.10 API update 3/4: x86_64

perfctr-2710-api-update-4-4-ppc32.patch
  perfctr-2.7.10 API update 4/4: ppc32

perfctr-api-update-1-9-physical-indexing-x86.patch
  perfctr API update 1/9: physical indexing, x86

perfctr-api-update-2-9-physical-indexing-ppc32.patch
  perfctr API update 2/9: physical indexing, ppc32

perfctr-api-update-3-9-cpu_control_header-x86.patch
  perfctr API update 3/9: cpu_control_header, x86

perfctr-api-update-4-9-cpu_control_header-ppc32.patch
  perfctr API update 4/9: cpu_control_header, ppc32

perfctr-api-update-5-9-cpu_control_header-common.patch
  perfctr API update 5/9: cpu_control_header, common

perfctr-api-update-6-9-cpu_control-access-common.patch
  perfctr API update 6/9: cpu_control access, common

perfctr-api-update-7-9-cpu_control-access-x86.patch
  perfctr API update 7/9: cpu_control access, x86

perfctr-api-update-8-9-cpu_control-access-ppc32.patch
  perfctr API update 8/9: cpu_control access, ppc32

perfctr-api-update-9-9-domain-based-read-write-syscalls.patch
  perfctr API update 9/9: domain-based read/write syscalls

perfctr-ia32-syscalls-on-x86-64-fix.patch
  perfctr ia32 syscalls on x86-64 fix

sched-improve-pinned-task-handling.patch
  sched: improve pinned task handling

sched-improve-pinned-task-handling-fix.patch
  sched-improve-pinned-task-handling fix

sched-no-aggressive-idle-balancing.patch
  sched: no aggressive idle balancing

sched-better-active-balancing-heuristic.patch
  sched: better active balancing heuristic

sched-generalised-cpu-load-averaging.patch
  sched: generalised CPU load averaging

sched-less-affine-wakups.patch
  sched: less affine wakups

sched-remove-aggressive-idle-balancing.patch
  sched: remove aggressive idle balancing

sched-sched-domains-aware-balance-on-fork.patch
  sched: sched-domains aware balance-on-fork

sched-schedstats-additions-for-sched-balance-fork.patch
  sched: schedstats additions for sched-balance-fork

sched-basic-tuning.patch
  sched: basic tuning

random-ia64-sched-domains-values.patch
  random ia64 sched-domains values

add-do_proc_doulonglongvec_minmax-to-sysctl-functions.patch
  Add do_proc_doulonglongvec_minmax to sysctl functions
  add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix
  add-do_proc_doulonglongvec_minmax-to-sysctl-functions fix 2

add-sysctl-interface-to-sched_domain-parameters.patch
  Add sysctl interface to sched_domain parameters

allow-x86_64-to-reenable-interrupts-on-contention.patch
  Allow x86_64 to reenable interrupts on contention

i386-cpu-hotplug-updated-for-mm.patch
  i386 CPU hotplug updated for -mm
  ppc64: fix hotplug cpu

disable-atykb-warning.patch
  disable atykb "too many keys pressed" warning

export-file_ra_state_init-again.patch
  Export file_ra_state_init() again

cachefs-filesystem.patch
  CacheFS filesystem

numa-policies-for-file-mappings-mpol_mf_move-cachefs.patch
  numa-policies-for-file-mappings-mpol_mf_move for cachefs

cachefs-release-search-records-lest-they-return-to-haunt-us.patch
  CacheFS: release search records lest they return to haunt us

fix-64-bit-problems-in-cachefs.patch
  Fix 64-bit problems in cachefs

cachefs-fixed-typos-that-cause-wrong-pointer-to-be-kunmapped.patch
  cachefs: fixed typos that cause wrong pointer to be kunmapped

cachefs-return-the-right-error-upon-invalid-mount.patch
  CacheFS: return the right error upon invalid mount

fix-cachefs-barrier-handling-and-other-kernel-discrepancies.patch
  Fix CacheFS barrier handling and other kernel discrepancies

remove-error-from-linux-cachefsh.patch
  Remove #error from linux/cachefs.h

cachefs-warning-fix-2.patch
  cachefs warning fix 2

cachefs-linkage-fix-2.patch
  cachefs linkage fix

cachefs-build-fix.patch
  cachefs build fix

cachefs-documentation.patch
  CacheFS documentation

add-page-becoming-writable-notification.patch
  Add page becoming writable notification

add-page-becoming-writable-notification-fix.patch
  do_wp_page_mk_pte_writable() fix

add-page-becoming-writable-notification-build-fix.patch
  add-page-becoming-writable-notification build fix

provide-a-filesystem-specific-syncable-page-bit.patch
  Provide a filesystem-specific sync'able page bit

provide-a-filesystem-specific-syncable-page-bit-fix.patch
  provide-a-filesystem-specific-syncable-page-bit-fix

provide-a-filesystem-specific-syncable-page-bit-fix-2.patch
  provide-a-filesystem-specific-syncable-page-bit-fix-2

make-afs-use-cachefs.patch
  Make AFS use CacheFS

afs-cachefs-dependency-fix.patch
  afs-cachefs-dependency-fix

split-general-cache-manager-from-cachefs.patch
  Split general cache manager from CacheFS

turn-cachefs-into-a-cache-backend.patch
  Turn CacheFS into a cache backend

rework-the-cachefs-documentation-to-reflect-fs-cache-split.patch
  Rework the CacheFS documentation to reflect FS-Cache split

update-afs-client-to-reflect-cachefs-split.patch
  Update AFS client to reflect CacheFS split

fscache-menuconfig-help-fix-documentation-path.patch
  fscache-menuconfig-help-fix-documentation-pathc

x86-rename-apic_mode_exint.patch
  kexec: x86: rename APIC_MODE_EXINT

x86-local-apic-fix.patch
  kexec: x86: local apic fix

x86_64-e820-64bit.patch
  kexec: x86_64: e820 64bit fix

x86-i8259-shutdown.patch
  kexec: x86: i8259 shutdown: disable interrupts

x86_64-i8259-shutdown.patch
  kexec: x86_64: add i8259 shutdown method

x86-apic-virtwire-on-shutdown.patch
  kexec: x86: resture apic virtual wire mode on shutdown

x86_64-apic-virtwire-on-shutdown.patch
  kexec: x86_64: restore apic virtual wire mode on shutdown

vmlinux-fix-physical-addrs.patch
  kexec: vmlinux: fix physical addresses

x86-vmlinux-fix-physical-addrs.patch
  kexec: x86: vmlinux: fix physical addresses

x86_64-vmlinux-fix-physical-addrs.patch
  kexec: x86_64: vmlinux: fix physical addresses

x86_64-entry64.patch
  kexec: x86_64: add 64-bit entry

x86-config-kernel-start.patch
  kexec: x86: add CONFIG_PYSICAL_START

x86_64-config-kernel-start.patch
  kexec: x86_64: add CONFIG_PHYSICAL_START

kexec-kexec-generic.patch
  kexec: add kexec syscalls

kexec-kexec-generic-kexec-use-unsigned-bitfield.patch
  kexec: use unsigned bitfield

x86-machine_shutdown.patch
  kexec: x86: factor out apic shutdown code

x86-kexec.patch
  kexec: x86 kexec core

x86-crashkernel.patch
  crashdump: x86 crashkernel option

x86-crashkernel-fix.patch
  kexec: fix for broken kexec on panic

x86_64-machine_shutdown.patch
  kexec: x86_64: factor out apic shutdown code

x86_64-kexec.patch
  kexec: x86_64 kexec implementation

x86_64-crashkernel.patch
  crashdump: x86_64: crashkernel option

kexec-ppc-support.patch
  kexec: kexec ppc support

kexec-ppc-fix-noret_type.patch
  kexec: ppc: fix NORET_TYPE

x86-crash_shutdown-nmi-shootdown.patch
  crashdump: x86: add NMI handler to capture other CPUs

x86-crash_shutdown-snapshot-registers.patch
  kexec: x86: snapshot registers during crash shutdown

x86-crash_shutdown-apic-shutdown.patch
  kexec: x86 shutdown APICs during crash_shutdown

crashdump-documentation.patch
  crashdump: documentation

crashdump-memory-preserving-reboot-using-kexec.patch
  crashdump: memory preserving reboot using kexec

crashdump-routines-for-copying-dump-pages.patch
  crashdump: routines for copying dump pages

crashdump-routines-for-copying-dump-pages-fixes.patch
  crashdump-routines-for-copying-dump-pages-fixes

crashdump-elf-format-dump-file-access.patch
  crashdump: elf format dump file access

crashdump-linear-raw-format-dump-file-access.patch
  crashdump: linear raw format dump file access

crashdump-linear-raw-format-dump-file-access-coding-style.patch
  crashdump-linear-raw-format-dump-file-access-coding-style

kdump-export-crash-notes-section-address-through.patch
  Kdump: Export crash notes section address through sysfs

kdump-export-crash-notes-section-address-through-build-fix.patch
  kdump-export-crash-notes-section-address-through build fix

kdump-export-crash-notes-section-address-through-x86_64-fix.patch
  kdump-export-crash-notes-section-address-through x86_64 fix

reiser4-sb_sync_inodes.patch
  reiser4: vfs: add super_operations.sync_inodes()

reiser4-allow-drop_inode-implementation.patch
  reiser4: export vfs inode.c symbols

reiser4-truncate_inode_pages_range.patch
  reiser4: vfs: add truncate_inode_pages_range()

reiser4-export-remove_from_page_cache.patch
  reiser4: export pagecache add/remove functions to modules

reiser4-export-page_cache_readahead.patch
  reiser4: export page_cache_readahead to modules

reiser4-reget-page-mapping.patch
  reiser4: vfs: re-check page->mapping after calling try_to_release_page()

reiser4-rcu-barrier.patch
  reiser4: add rcu_barrier() synchronization point

reiser4-rcu-barrier-license-fix.patch
  reiser4-rcu-barrier-license-fix

reiser4-export-inode_lock.patch
  reiser4: export inode_lock to modules

reiser4-export-inode_lock-unexport-__iget.patch
  reiser4-export-inode_lock-unexport-__iget

reiser4-export-pagevec-funcs.patch
  reiser4: export pagevec functions to modules

reiser4-export-radix_tree_preload.patch
  reiser4: export radix_tree_preload() to modules

reiser4-export-find_get_pages.patch

reiser4-radix_tree_lookup_slot.patch
  reiser4: add radix_tree_lookup_slot()

reiser4-perthread-pages.patch
  reiser4: per-thread page pools

reiser4-perthread_pages_alloc-cleanup.patch
  perthread_pages_alloc cleanup

reiser4-include-reiser4.patch
  reiser4: add to build system

reiser4-doc.patch
  reiser4: documentation

reiser4-only.patch
  reiser4: main fs

fs-reiser4-possible-cleanups.patch
  fs/reiser4/: possible cleanups

reiser4-kconfig-help-cleanup.patch
  reiser4 Kconfig help cleanup

reiser4-cleanup-pg_arch_1.patch
  reiser4 cleanup (PG_arch_1)

reiser4-build-fix.patch
  reiser4 build fix

reiser4-update.patch
  reiser4 update

reiser4-only-memory_backed-fix.patch
  reiser4-only-memory_backed-fix

add-acpi-based-floppy-controller-enumeration.patch
  Add ACPI-based floppy controller enumeration.

possible-dcache-bug-debugging-patch.patch
  Possible dcache BUG: debugging patch

serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
  serial: add support for non-standard XTALs to 16c950 driver

add-support-for-possio-gcc-aka-pcmcia-siemens-mc45.patch
  Add support for Possio GCC AKA PCMCIA Siemens MC45

generic-serial-cli-conversion.patch
  generic-serial cli() conversion

specialix-io8-cli-conversion.patch
  Specialix/IO8 cli() conversion

sx-cli-conversion.patch
  SX cli() conversion

au1x00_uart-deadlock-fix.patch
  au1x00_uart deadlock fix

sealevel-8-port-rs-232-rs-422-rs-485-board.patch
  sealevel 8 port RS-232/RS-422/RS-485 board

revert-allow-oem-written-modules-to-make-calls-to-ia64-oem-sal-functions.patch
  revert "allow OEM written modules to make calls to ia64 OEM SAL functions"

remove-lock_section-from-x86_64-spin_lock-asm.patch
  remove LOCK_SECTION from x86_64 spin_lock asm

kfree_skb-dump_stack.patch
  kfree_skb-dump_stack

minimal-ide-disk-updates.patch
  Minimal ide-disk updates

vt-dont-call-unblank-at-irq-time.patch
  vt: don't call unblank at irq time

ppc32-move-powermac-backlight-stuff-to-a-workqueue.patch
  ppc32: move powermac backlight stuff to a workqueue

radeonfb-implement-proper-workarounds-for-pll-accesses.patch
  radeonfb: Implement proper workarounds for PLL accesses

radeonfb-ddc-i2c-fix.patch
  radeonfb: DDC i2c fix

fbdev-nvidia-licensing-clarification.patch
  fbdev: mvidia licensing clarification

fbcon-stop-framebuffer-operations-before-hardware-is-properly-initialized.patch
  fbcon: Stop framebuffer operations before hardware is properly initialized

nvidiafb-maximize-blit-buffer-capacity.patch
  nvidiafb: Maximize blit buffer capacity

pm2fb-x-and-vt-switching-crash-fix.patch
  pm2fb: X and VT switching crash fix

nvidiafb-kconfig-help-text-update-for-config-fb_nvidia.patch
  nvidiafb: Kconfig help text update for config FB_NVIDIA

fbdev-cleanups-in-drivers-video-part-2.patch
  fbdev: Cleanups in drivers/video part 2

excessive-atyfb-debug-messages.patch
  Excessive atyfb debug messages

atyfb-add-boot-module-option-to-override-composite-sync.patch
  atyfb: Add boot/module option to override composite sync

fbdev-kconfig-fix-for-macmodes-and-ppc.patch
  fbdev: Kconfig fix for macmodes and PPC

fbdev-convert-drivers-to-pci_register_driver.patch
  fbdev: Convert drivers to pci_register_driver

sisfb-trivial-cleanups.patch
  sisfb: Trivial cleanups

tridentfb-clean-up-printks.patch
  tridentfb: Clean up printk()'s

sisusb-fix-arg-types.patch
  sisusb: fix arg types

s1d13xxxfb-add-support-for-epson-s1d13806-fb.patch
  s1d13xxxfb: Add support for Epson S1D13806 FB

matroxfb-compile-error.patch
  matroxfb compile error

md-merge-md_enter_safemode-into-md_check_recovery.patch
  md: merge md_enter_safemode into md_check_recovery

md-improve-locking-on-safemode-and-move-superblock-writes.patch
  md: improve locking on 'safemode' and move superblock writes

md-improve-the-interface-to-sync_request.patch
  md: improve the interface to sync_request

md-optimised-resync-using-bitmap-based-intent-logging.patch
  md: optimised resync using Bitmap based intent logging

md-printk-fix.patch
  md printk fix

md-optimised-resync-using-bitmap-based-intent-logging-fix.patch
  md-optimised-resync-using-bitmap-based-intent-logging fix

md-raid1-support-for-bitmap-intent-logging.patch
  md: raid1 support for bitmap intent logging

md-raid1-support-for-bitmap-intent-logging-fix.patch
  md: initialise sync_blocks in raid1 resync

md-optimise-reconstruction-when-re-adding-a-recently-failed-drive.patch
  md: optimise reconstruction when re-adding a recently failed drive.

md-fix-deadlock-due-to-md-thread-processing-delayed-requests.patch
  md: fix deadlock due to md thread processing delayed requests.

detect-atomic-counter-underflows.patch
  detect atomic counter underflows

post-halloween-doc.patch
  post halloween doc

fuse-maintainers-kconfig-and-makefile-changes.patch
  FUSE - MAINTAINERS, Kconfig and Makefile changes

fuse-core.patch
  FUSE - core

fuse-device-functions.patch
  FUSE - device functions

fuse-read-only-operations.patch
  FUSE - read-only operations

fuse-read-write-operations.patch
  FUSE - read-write operations

fuse-file-operations.patch
  FUSE - file operations

fuse-mount-options.patch
  FUSE - mount options

fuse-extended-attribute-operations.patch
  FUSE - extended attribute operations

fuse-readpages-operation.patch
  FUSE - readpages operation

fuse-nfs-export.patch
  FUSE - NFS export

fuse-direct-i-o.patch
  FUSE - direct I/O

fuse-transfer-readdir-data-through-device.patch
  fuse: transfer readdir data through device

cryptoapi-prepare-for-processing-multiple-buffers-at.patch
  CryptoAPI: prepare for processing multiple buffers at a time

cryptoapi-update-padlock-to-process-multiple-blocks-at.patch
  CryptoAPI: Update PadLock to process multiple blocks at  once

drivers-isdn-divert-isdn_divertc-make-5-functions-static.patch
  drivers/isdn/divert/isdn_divert.c: make 5 functions static

drivers-isdn-capi-make-some-code-static.patch
  drivers/isdn/capi/: make some code static

fix-pm_message_t-in-generic-code.patch
  Fix pm_message_t in generic code

fix-u32-vs-pm_message_t-in-usb.patch
  Fix u32 vs. pm_message_t in USB

fix-u32-vs-pm_message_t-in-usb-fix.patch
  fix-u32-vs-pm_message_t-in-usb fix

more-pm_message_t-fixes.patch
  more pm_message_t fixes

fix-u32-vs-pm_message_t-confusion-in-oss.patch
  Fix u32 vs. pm_message_t confusion in OSS

fix-u32-vs-pm_message_t-confusion-in-pcmcia.patch
  Fix u32 vs. pm_message_t confusion in PCMCIA

fix-u32-vs-pm_message_t-confusion-in-framebuffers.patch
  Fix u32 vs. pm_message_t confusion in framebuffers

fix-u32-vs-pm_message_t-confusion-in-mmc.patch
  Fix u32 vs. pm_message_t confusion in MMC

fix-u32-vs-pm_message_t-confusion-in-serials.patch
  Fix u32 vs. pm_message_t confusion in serials

fix-u32-vs-pm_message_t-in-macintosh.patch
  Fix u32 vs. pm_message_t in macintosh

fix-u32-vs-pm_message_t-confusion-in-agp.patch
  Fix u32 vs. pm_message_t confusion in AGP

cyrix-eliminate-bad-section-references.patch
  cyrix: eliminate bad section references

drivers-media-video-tvaudioc-make-some-variables-static.patch
  drivers/media/video/tvaudio.c: make some variables static

drivers-isdn-sc-possible-cleanups.patch
  drivers/isdn/sc/: possible cleanups

drivers-isdn-pcbit-possible-cleanups.patch
  drivers/isdn/pcbit/: possible cleanups

drivers-isdn-i4l-possible-cleanups.patch
  drivers/isdn/i4l/: possible cleanups

unexport-mca_find_device_by_slot.patch
  unexport mca_find_device_by_slot

drivers-isdn-hardware-avm-misc-cleanups.patch
  drivers/isdn/hardware/avm/: misc cleanups

drivers-isdn-act2000-capic-if-0-an-unused-function.patch
  drivers/isdn/act2000/capi.c: #if 0 an unused function

pwc-fix-printk-arg-types.patch
  pwc: fix printk arg types

tpm-fix-gcc-printk-warnings.patch
  tpm: fix gcc printk warnings

x86-64-add-memcpy-memset-prototypes.patch
  x86-64: add memcpy/memset prototypes

au1100fb-convert-to-c99-inits.patch
  au1100fb: convert to C99 inits.

reiserfs-use-null-instead-of-0.patch
  reiserfs: use NULL instead of 0

comments-on-locking-of-task-comm.patch
  comments on locking of task->comm

Re: 2.6.11-mm4

[Benoit Boissinot]

On Wed, Mar 16, 2005 at 04:06:54AM -0800, Andrew Morton wrote:
> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm4/
> 
> - fbdev update
>
It doesn't compile with gcc-4.0.

drivers/video/console/fbcon.c:133: error: static declaration of ‘fb_con’
follows non-static declaration
drivers/video/console/fbcon.h:166: error: previous declaration of
‘fb_con’ was here

Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>

--- linux-test/drivers/video/console/fbcon.h	2005-03-16 15:15:57.000000000 +0100
+++ linux/drivers/video/console/fbcon.h	2005-03-16 15:14:18.000000000 +0100
@@ -163,6 +163,4 @@ extern void fbcon_set_tileops(struct vc_
 #endif
 extern void fbcon_set_bitops(struct fbcon_ops *ops);
 
-extern const struct consw fb_con;
-
 #endif /* _VIDEO_FBCON_H */

Re: 2.6.11-mm4

[Brice Goglin]

Andrew Morton a écrit :
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm4/
> 
> - fbdev update
> 
> - percfctr updates
> 
> - Lots of ppc32/ppc64 things
> 
> - Broken on some ia64 machines.  We're still working through fallout from
>   the recent pagetable walking consolidation patches.

Hi Andrew,

NTFS does not compile if CONFIG_NTFS_RW is not set.
Patch is attached.

Note I used NTFS_RW as the rest of the NTFS code does.
Don't know whether CONFIG_NTFS_RW preferred.

Regards,

Brice


Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>


--- linux-test/fs/ntfs/attrib.c.old	2005-03-16 15:26:13.000000000 +0100
+++ linux-test/fs/ntfs/attrib.c	2005-03-16 15:27:14.000000000 +0100
@@ -1229,6 +1229,7 @@
  	return 0;
  }

+#ifdef NTFS_RW
  /**
   * ntfs_attr_make_non_resident - convert a resident to a non-resident attribute
   * @ni:		ntfs inode describing the attribute to convert
@@ -1535,6 +1536,7 @@
  		err = -EIO;
  	return err;
  }
+#endif /* NTFS_RW */

  /**
   * ntfs_attr_set - fill (a part of) an attribute with a byte

Re: 2.6.11-mm4

[J.A. Magallon]

On 03.16, Andrew Morton wrote:
> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm4/
> 
...
>
> +revert-gconfig-changes.patch
> 
>  Back out a recent change which broke gconfig.
> 

What was broken ?

Now it does not work:

werewolf:/usr/src/linux# make gconfig
  HOSTCC  scripts/kconfig/gconf.o
In file included from /usr/include/gtk-2.0/gtk/gtkactiongroup.h:34,
                 from /usr/include/gtk-2.0/gtk/gtk.h:38,
                 from scripts/kconfig/gconf.c:16:
/usr/include/gtk-2.0/gtk/gtkitemfactory.h:53: warning: function declaration isn't a prototype
scripts/kconfig/gconf.c: In function `init_main_window':
scripts/kconfig/gconf.c:225: error: `xpm_single_view' undeclared (first use in this function)
scripts/kconfig/gconf.c:225: error: (Each undeclared identifier is reported only once
scripts/kconfig/gconf.c:225: error: for each function it appears in.)
scripts/kconfig/gconf.c:235: error: `xpm_split_view' undeclared (first use in this function)
scripts/kconfig/gconf.c:245: error: `xpm_tree_view' undeclared (first use in this function)
scripts/kconfig/gconf.c: At top level:
scripts/kconfig/gconf.c:973: warning: 'renderer_toggled' defined but not used
make[1]: *** [scripts/kconfig/gconf.o] Error 1
make: *** [gconfig] Error 2


An if you just open gconf.glade with glade-2 and just _save_ it without
doing nothing, it changes a lot of things.

by

--
J.A. Magallon <jamagallon()able!es>     \               Software is like sex:
werewolf!able!es                         \         It's better when it's free
Mandrakelinux release 10.2 (Cooker) for i586
Linux 2.6.11-jam4 (gcc 3.4.3 (Mandrakelinux 10.2 3.4.3-6mdk)) #1

Re: 2.6.11-mm4

[maximilian attems]

>+w6692-eliminate-bad-section-references.patch

thanks for updating the patch.
the txt has still the old content, please change it to:

added __init to W6692Version().

--
maks

Re: 2.6.11-mm4

[Adrian Bunk]

On Wed, Mar 16, 2005 at 03:22:49PM +0100, Benoit Boissinot wrote:

> It doesn't compile with gcc-4.0.
> 
> drivers/video/console/fbcon.c:133: error: static declaration of ???fb_con???
> follows non-static declaration
> drivers/video/console/fbcon.h:166: error: previous declaration of
> ???fb_con??? was here
> 
> Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>

Acked-by: Adrian Bunk <bunk@stusta.de>

Thanks for the patch.

That was my fault:
gcc 3.4 doesn't even warn about this, and I missed it while grep'ing.

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

Re: 2.6.11-mm4

[Sam Ravnborg]

On Wed, Mar 16, 2005 at 03:07:12PM +0000, J.A. Magallon wrote:
> 
> On 03.16, Andrew Morton wrote:
> > 
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm4/
> > 
> ...
> >
> > +revert-gconfig-changes.patch
> > 
> >  Back out a recent change which broke gconfig.
> > 
> 
> What was broken ?

It did not display the nice icons with gtk2.4 anymore.
And the fact that it generates ~10 warnings when being compiled annoy me
as well. Although I have not had the courage to try to fix this gtk
stuff.

A patch to fix gconfig on top of linus-latest is very welcome.

	Sam

Re: 2.6.11-mm4

[Sam Ravnborg]

On Wed, Mar 16, 2005 at 07:22:15PM +0100, Sam Ravnborg wrote:
> On Wed, Mar 16, 2005 at 03:07:12PM +0000, J.A. Magallon wrote:
> > 
> > On 03.16, Andrew Morton wrote:
> > > 
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm4/
> > > 
> > ...
> > >
> > > +revert-gconfig-changes.patch
> > > 
> > >  Back out a recent change which broke gconfig.
> > > 
> > 
> > What was broken ?
> 
> It did not display the nice icons with gtk2.4 anymore.
> And the fact that it generates ~10 warnings when being compiled annoy me
> as well. Although I have not had the courage to try to fix this gtk
> stuff.

When compiled:
  HOSTCC  scripts/kconfig/gconf.o
  In file included from /usr/include/gtk-2.0/gtk/gtkactiongroup.h:34,
                   from /usr/include/gtk-2.0/gtk/gtk.h:38,
                   from scripts/kconfig/gconf.c:16:
/usr/include/gtk-2.0/gtk/gtkitemfactory.h:53: warning: function declaration isn't a prototype
scripts/kconfig/gconf.c:941: warning: `renderer_toggled' defined but not used
				    


When executed:
scripts/kconfig/gconf arch/i386/Kconfig

(gconf:8782): Gtk-WARNING **: Mixing deprecated and non-deprecated
GtkToolbar API is not allowed

(gconf:8782): Gtk-WARNING **: Mixing deprecated and non-deprecated
GtkToolbar API is not allowed

(gconf:8782): Gtk-WARNING **: Mixing deprecated and non-deprecated
GtkToolbar API is not allowed

(gconf:8782): Gtk-WARNING **: Mixing deprecated and non-deprecated
GtkToolbar API is not allowed

(gconf:8782): Gtk-WARNING **: Mixing deprecated and non-deprecated
GtkToolbar API is not allowed

(gconf:8782): Gtk-WARNING **: Mixing deprecated and non-deprecated
GtkToolbar API is not allowed

(gconf:8782): Gtk-WARNING **: Mixing deprecated and non-deprecated
GtkToolbar API is not allowed

(gconf:8782): Gtk-WARNING **: Mixing deprecated and non-deprecated
GtkToolbar API is not allowed
make[1]: *** [gconfig] Interrupt


This is with gtk2.0.

	Sam

Re: 2.6.11-mm4

[Andrew Morton]

"J.A. Magallon" <jamagallon@able.es> wrote:
>
> On 03.16, Andrew Morton wrote:
>  > 
>  > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm4/
>  > 
>  ...
>  >
>  > +revert-gconfig-changes.patch
>  > 
>  >  Back out a recent change which broke gconfig.
>  > 
> 
>  What was broken ?

hm.  I emailed you twice, and had a feeling that things weren't getting
through.

The patch caused those little pixmap buttons across the top of the main
window to vanish when using gtk+-1.2.10-28.1.  See
http://www.zip.com.au/~akpm/linux/patches/stuff/x.jpg.

I now note that scripts/kconfig/gconf.c doesn't compile at all with the
above backout patch.  Drat.

Re: 2.6.11-mm4

[J.A. Magallon]

On 03.16, Andrew Morton wrote:
> "J.A. Magallon" <jamagallon@able.es> wrote:
> >
> > On 03.16, Andrew Morton wrote:
> >  > 
> >  > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm4/
> >  > 
> >  ...
> >  >
> >  > +revert-gconfig-changes.patch
> >  > 
> >  >  Back out a recent change which broke gconfig.
> >  > 
> > 
> >  What was broken ?
> 
> hm.  I emailed you twice, and had a feeling that things weren't getting
> through.
> 
> The patch caused those little pixmap buttons across the top of the main
> window to vanish when using gtk+-1.2.10-28.1.  See
> http://www.zip.com.au/~akpm/linux/patches/stuff/x.jpg.
> 
> I now note that scripts/kconfig/gconf.c doesn't compile at all with the
> above backout patch.  Drat.
> 

But gconf is not supposed to build with gtk-1.2, it needs 2.x,
at least reding this:

 linux/scripts/kconfig/Makefile:

HOSTLOADLIBES_gconf = `pkg-config gtk+-2.0 gmodule-2.0 libglade-2.0 --libs`
HOSTCFLAGS_gconf.o  = `pkg-config gtk+-2.0 gmodule-2.0 libglade-2.0 --cflags` \
                          -D LKC_DIRECT_LINK

...
# GTK needs some extra effort, too...
$(obj)/.tmp_gtkcheck:
    @if `pkg-config gtk+-2.0 gmodule-2.0 libglade-2.0 --exists`; then       \
        if `pkg-config gtk+-2.0 --atleast-version=2.0.0`; then          \
            touch $@;                               \
        else                                    \
            echo "*";                           \
            echo "* GTK+ is present but version >= 2.0.0 is required."; \
            echo "*";                           \
            false;                              \
        fi                                  \
    else                                        \
        echo "*";                               \
        echo "* Unable to find the GTK+ installation. Please make sure that";   \
        echo "* the GTK+ 2.0 development package is correctly installed...";    \
        echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0.";         \
        echo "*";                               \
        false;                                  \
    fi
endif

I can try just to make it compile, and then polish all the edges...
If you swear to me it does not have to build under gtk-1.2 (which with
current Makefile I do not know how can it be done), there are many stock
things that can be done automagically in 2.x, and not manually like in gtk-1.2.

TIA

--
J.A. Magallon <jamagallon()able!es>     \               Software is like sex:
werewolf!able!es                         \         It's better when it's free
Mandrakelinux release 10.2 (Cooker) for i586
Linux 2.6.11-jam5 (gcc 3.4.3 (Mandrakelinux 10.2 3.4.3-6mdk)) #1

Re: 2.6.11-mm4

[Sean Neakums]

Fails to build here:

  arch/ppc/platforms/built-in.o(.pmac.text+0x6828): In function `flush_disable_caches':
  : undefined reference to `cpufreq_frequency_table_verify'
  arch/ppc/platforms/built-in.o(.pmac.text+0x6868): In function `flush_disable_caches':
  : undefined reference to `cpufreq_frequency_table_target'
  arch/ppc/platforms/built-in.o(.pmac.text+0x68f0): In function `flush_disable_caches':
  : undefined reference to `cpufreq_frequency_table_cpuinfo'
  make: *** [.tmp_vmlinux1] Error 1


This patch makes it work again; there are duplicate CPU_FREQ_TABLE
definitions in some arch Kconfigs.  Possibly not the Right Thing(tm).

[briny(~/build/linux/S11-mm4)] find arch/ -name Kconfig | xargs grep '^config CPU_FREQ_TABLE'
arch/sparc64/Kconfig:config CPU_FREQ_TABLE
arch/sh/Kconfig:config CPU_FREQ_TABLE
arch/ppc/Kconfig:config CPU_FREQ_TABLE
arch/x86_64/kernel/cpufreq/Kconfig:config CPU_FREQ_TABLE


--- S11-mm4/drivers/cpufreq/Kconfig~	2005-03-16 22:12:52.000000000 +0000
+++ S11-mm4/drivers/cpufreq/Kconfig	2005-03-16 22:37:59.000000000 +0000
@@ -15,9 +15,6 @@
 
 if CPU_FREQ
 
-config CPU_FREQ_TABLE
-       def_tristate m
-
 config CPU_FREQ_DEBUG
 	bool "Enable CPUfreq debugging"
 	help

-- 
Dag vijandelijk luchtschip de huismeester is dood

[PATCH] make gconfig build again

[J.A. Magallon]

On 03.16, Andrew Morton wrote:
> "J.A. Magallon" <jamagallon@able.es> wrote:
> >
> > On 03.16, Andrew Morton wrote:
> >  > 
> >  > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm4/
> >  > 
> >  ...
> >  >
> >  > +revert-gconfig-changes.patch
> >  > 
> >  >  Back out a recent change which broke gconfig.
> >  > 
> > 
> >  What was broken ?
> 
> hm.  I emailed you twice, and had a feeling that things weren't getting
> through.
> 
> The patch caused those little pixmap buttons across the top of the main
> window to vanish when using gtk+-1.2.10-28.1.  See
> http://www.zip.com.au/~akpm/linux/patches/stuff/x.jpg.
> 
> I now note that scripts/kconfig/gconf.c doesn't compile at all with the
> above backout patch.  Drat.
> 

This is enough to make it compile:

diff -ruN linux-2.6.11-mm4/scripts/kconfig/gconf.c linux-2.6.11-mm4-gconf/scripts/kconfig/gconf.c
--- linux-2.6.11-mm4/scripts/kconfig/gconf.c	2005-03-16 23:45:56.000000000 +0100
+++ linux-2.6.11-mm4-gconf/scripts/kconfig/gconf.c	2005-03-16 23:48:25.000000000 +0100
@@ -11,6 +11,7 @@
 #endif
 
 #include "lkc.h"
+#include "images.c"
 
 #include <glade/glade.h>
 #include <gtk/gtk.h>
@@ -1171,42 +1172,6 @@
 }
 
 
-/* Conf management */
-
-static const char *xpm_menu[] = {
-"12 12 2 1",
-"  c white",
-". c black",
-"            ",
-"            ",
-"  .         ",
-"  ..        ",
-"  ...       ",
-"  ....      ",
-"  .....     ",
-"  ....      ",
-"  ...       ",
-"  ..        ",
-"  .         ",
-"            "};
-
-static const char *xpm_void[] = {
-"12 12 2 1",
-"  c white",
-". c black",
-"            ",
-"            ",
-"            ",
-"            ",
-"            ",
-"            ",
-"            ",
-"            ",
-"            ",
-"            ",
-"            ",
-"            "};
-
 /* Fill a row of strings */
 static gchar **fill_row(struct menu *menu)
 {


--
J.A. Magallon <jamagallon()able!es>     \               Software is like sex:
werewolf!able!es                         \         It's better when it's free
Mandrakelinux release 10.2 (Cooker) for i586
Linux 2.6.11-jam5 (gcc 3.4.3 (Mandrakelinux 10.2 3.4.3-6mdk)) #1

Re: 2.6.11-mm4

[Andrew Morton]

"J.A. Magallon" <jamagallon@able.es> wrote:
>
>  On 03.16, Andrew Morton wrote:
>  > "J.A. Magallon" <jamagallon@able.es> wrote:
>  > >
>  > > On 03.16, Andrew Morton wrote:
>  > >  > 
>  > >  > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm4/
>  > >  > 
>  > >  ...
>  > >  >
>  > >  > +revert-gconfig-changes.patch
>  > >  > 
>  > >  >  Back out a recent change which broke gconfig.
>  > >  > 
>  > > 
>  > >  What was broken ?
>  > 
>  > hm.  I emailed you twice, and had a feeling that things weren't getting
>  > through.
>  > 
>  > The patch caused those little pixmap buttons across the top of the main
>  > window to vanish when using gtk+-1.2.10-28.1.  See
>  > http://www.zip.com.au/~akpm/linux/patches/stuff/x.jpg.
>  > 
>  > I now note that scripts/kconfig/gconf.c doesn't compile at all with the
>  > above backout patch.  Drat.
>  > 
> 
>  But gconf is not supposed to build with gtk-1.2, it needs 2.x,

I was probably looking at the wrong thing.  This is a Fedora Core 1 system.


bix:/usr/src/25> ldd scripts/kconfig/gconf
        linux-gate.so.1 =>  (0xffffe000)
        libglade-2.0.so.0 => /usr/lib/libglade-2.0.so.0 (0x4d1cf000)
        libgtk-x11-2.0.so.0 => /usr/lib/libgtk-x11-2.0.so.0 (0x4cd14000)
        libxml2.so.2 => /usr/lib/libxml2.so.2 (0x4d6f4000)
        libpthread.so.0 => /lib/tls/libpthread.so.0 (0x4c6aa000)
        libz.so.1 => /usr/lib/libz.so.1 (0x4c687000)
        libgdk-x11-2.0.so.0 => /usr/lib/libgdk-x11-2.0.so.0 (0x4cc62000)
        libatk-1.0.so.0 => /usr/lib/libatk-1.0.so.0 (0x4cb4d000)
        libgdk_pixbuf-2.0.so.0 => /usr/lib/libgdk_pixbuf-2.0.so.0 (0x4cc4d000)
        libm.so.6 => /lib/tls/libm.so.6 (0x4c57e000)
        libpangoxft-1.0.so.0 => /usr/lib/libpangoxft-1.0.so.0 (0x4cf64000)
        libpangox-1.0.so.0 => /usr/lib/libpangox-1.0.so.0 (0x4cd05000)
        libpango-1.0.so.0 => /usr/lib/libpango-1.0.so.0 (0x4ccd1000)
        libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0x4cc12000)
        libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0 (0x4cc47000)
        libdl.so.2 => /lib/libdl.so.2 (0x4c5a2000)
        libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x4cba7000)
        libc.so.6 => /lib/tls/libc.so.6 (0x4c443000)
        libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x4c5a7000)
        /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x4c42b000)
        libXrandr.so.2 => /usr/X11R6/lib/libXrandr.so.2 (0x4c900000)
        libXi.so.6 => /usr/X11R6/lib/libXi.so.6 (0x4ca28000)
        libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x4c69a000)
        libXft.so.2 => /usr/X11R6/lib/libXft.so.2 (0x4c826000)
        libXrender.so.1 => /usr/X11R6/lib/libXrender.so.1 (0x4c7bb000)
        libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0x4c7e5000)
        libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x4c6f3000)
        libexpat.so.0 => /usr/lib/libexpat.so.0 (0x4c799000)

Re: 2.6.11-mm4

[Andrew Morton]

Sean Neakums <sneakums@zork.net> wrote:
>
>  Fails to build here:
> 
>    arch/ppc/platforms/built-in.o(.pmac.text+0x6828): In function `flush_disable_caches':
>    : undefined reference to `cpufreq_frequency_table_verify'
>    arch/ppc/platforms/built-in.o(.pmac.text+0x6868): In function `flush_disable_caches':
>    : undefined reference to `cpufreq_frequency_table_target'
>    arch/ppc/platforms/built-in.o(.pmac.text+0x68f0): In function `flush_disable_caches':
>    : undefined reference to `cpufreq_frequency_table_cpuinfo'
>    make: *** [.tmp_vmlinux1] Error 1
> 
> 
>  This patch makes it work again; there are duplicate CPU_FREQ_TABLE
>  definitions in some arch Kconfigs.  Possibly not the Right Thing(tm).
> 
>  [briny(~/build/linux/S11-mm4)] find arch/ -name Kconfig | xargs grep '^config CPU_FREQ_TABLE'
>  arch/sparc64/Kconfig:config CPU_FREQ_TABLE
>  arch/sh/Kconfig:config CPU_FREQ_TABLE
>  arch/ppc/Kconfig:config CPU_FREQ_TABLE
>  arch/x86_64/kernel/cpufreq/Kconfig:config CPU_FREQ_TABLE

Yes, the pmac cpufreq Kconfig dependencies are being troublesome.

Roman sent this to Ben and I overnight:


From: Roman Zippel <zippel@linux-m68k.org>

This completes the Kconfig cleanup for all other archs.  CPU_FREQ_TABLE was
moved to drivers/cpufreq/Kconfig and is selected as needed.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---

 25-akpm/arch/ppc/Kconfig                   |    6 +-----
 25-akpm/arch/sh/Kconfig                    |   11 +----------
 25-akpm/arch/sparc64/Kconfig               |   16 ++++------------
 25-akpm/arch/x86_64/kernel/cpufreq/Kconfig |   28 ++++++++++------------------
 4 files changed, 16 insertions(+), 45 deletions(-)

diff -puN arch/ppc/Kconfig~complete-cpufreq-kconfig-cleanup arch/ppc/Kconfig
--- 25/arch/ppc/Kconfig~complete-cpufreq-kconfig-cleanup	2005-03-16 15:05:33.000000000 -0800
+++ 25-akpm/arch/ppc/Kconfig	2005-03-16 15:05:33.000000000 -0800
@@ -203,16 +203,12 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_PMAC
 	bool "Support for Apple PowerBooks"
 	depends on CPU_FREQ && ADB_PMU
+	select CPU_FREQ_TABLE
 	help
 	  This adds support for frequency switching on Apple PowerBooks,
 	  this currently includes some models of iBook & Titanium
 	  PowerBook.
 
-config CPU_FREQ_TABLE
-	tristate
-	depends on CPU_FREQ_PMAC
-	default y
-
 config PPC601_SYNC_FIX
 	bool "Workarounds for PPC601 bugs"
 	depends on 6xx && (PPC_PREP || PPC_PMAC)
diff -puN arch/sh/Kconfig~complete-cpufreq-kconfig-cleanup arch/sh/Kconfig
--- 25/arch/sh/Kconfig~complete-cpufreq-kconfig-cleanup	2005-03-16 15:05:33.000000000 -0800
+++ 25-akpm/arch/sh/Kconfig	2005-03-16 15:05:33.000000000 -0800
@@ -659,19 +659,10 @@ menu "CPU Frequency scaling"
 
 source "drivers/cpufreq/Kconfig"
 
-config CPU_FREQ_TABLE
-	tristate "CPU frequency table helpers"
-	depends on CPU_FREQ
-	default y
-	help
-	  Many cpufreq drivers use these helpers, so only say N here if
-	  the cpufreq driver of your choice doesn't need these helpers.
-
-	  If unsure, say Y.
-
 config SH_CPU_FREQ
 	tristate "SuperH CPU Frequency driver"
 	depends on CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This adds the cpufreq driver for SuperH. At present, only
 	  the SH-4 is supported.
diff -puN arch/sparc64/Kconfig~complete-cpufreq-kconfig-cleanup arch/sparc64/Kconfig
--- 25/arch/sparc64/Kconfig~complete-cpufreq-kconfig-cleanup	2005-03-16 15:05:33.000000000 -0800
+++ 25-akpm/arch/sparc64/Kconfig	2005-03-16 15:05:33.000000000 -0800
@@ -136,19 +136,10 @@ config NR_CPUS
 
 source "drivers/cpufreq/Kconfig"
 
-config CPU_FREQ_TABLE
-       tristate "CPU frequency table helpers"
-       depends on CPU_FREQ
-       default y
-       help
-         Many CPUFreq drivers use these helpers, so only say N here if
-	 the CPUFreq driver of your choice doesn't need these helpers.
-
-	 If in doubt, say Y.
-
 config US3_FREQ
 	tristate "UltraSPARC-III CPU Frequency driver"
-	depends on CPU_FREQ_TABLE
+	depends on CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for UltraSPARC-III processors.
 
@@ -158,7 +149,8 @@ config US3_FREQ
 
 config US2E_FREQ
 	tristate "UltraSPARC-IIe CPU Frequency driver"
-	depends on CPU_FREQ_TABLE
+	depends on CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for UltraSPARC-IIe processors.
 
diff -puN arch/x86_64/kernel/cpufreq/Kconfig~complete-cpufreq-kconfig-cleanup arch/x86_64/kernel/cpufreq/Kconfig
--- 25/arch/x86_64/kernel/cpufreq/Kconfig~complete-cpufreq-kconfig-cleanup	2005-03-16 15:05:33.000000000 -0800
+++ 25-akpm/arch/x86_64/kernel/cpufreq/Kconfig	2005-03-16 15:05:33.000000000 -0800
@@ -6,22 +6,13 @@ menu "CPU Frequency scaling"
 
 source "drivers/cpufreq/Kconfig"
 
-config CPU_FREQ_TABLE
-       tristate "CPU frequency table helpers"
-       depends on CPU_FREQ
-       default y
-       help
-         Many CPUFreq drivers use these helpers, so only say N here if
-	 the CPUFreq driver of your choice doesn't need these helpers.
-
-	 If in doubt, say Y.
+if CPU_FREQ
 
 comment "CPUFreq processor drivers"
-       depends on CPU_FREQ
 
 config X86_POWERNOW_K8
 	tristate "AMD Opteron/Athlon64 PowerNow!"
-	depends on CPU_FREQ_TABLE
+	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
 
@@ -31,12 +22,14 @@ config X86_POWERNOW_K8
 
 config X86_POWERNOW_K8_ACPI
 	bool
-	depends on ((X86_POWERNOW_K8 = "m" && ACPI_PROCESSOR) || (X86_POWERNOW_K8 = "y" && ACPI_PROCESSOR = "y"))
+	depends on X86_POWERNOW_K8 && ACPI_PROCESSOR
+	depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
 	default y
 
 config X86_SPEEDSTEP_CENTRINO
 	tristate "Intel Enhanced SpeedStep"
-	depends on CPU_FREQ_TABLE && ACPI_PROCESSOR
+	select CPU_FREQ_TABLE
+	depends on ACPI_PROCESSOR
 	help
 	  This adds the CPUFreq driver for Enhanced SpeedStep enabled
 	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs
@@ -53,7 +46,7 @@ config X86_SPEEDSTEP_CENTRINO_ACPI
 
 config X86_ACPI_CPUFREQ
 	tristate "ACPI Processor P-States driver"
-	depends on CPU_FREQ_TABLE && ACPI_PROCESSOR
+	depends on ACPI_PROCESSOR
 	help
 	  This driver adds a CPUFreq driver which utilizes the ACPI
 	  Processor Performance States.
@@ -63,7 +56,6 @@ config X86_ACPI_CPUFREQ
 	  If in doubt, say N.
 
 comment "shared options"
-	depends on CPU_FREQ
 
 config X86_ACPI_CPUFREQ_PROC_INTF
         bool "/proc/acpi/processor/../performance interface (deprecated)"
@@ -78,7 +70,7 @@ config X86_ACPI_CPUFREQ_PROC_INTF
 
 config X86_P4_CLOCKMOD
 	tristate "Intel Pentium 4 clock modulation"
-	depends on CPU_FREQ_TABLE && EMBEDDED
+	depends on EMBEDDED
 	help
 	  This adds the clock modulation driver for Intel Pentium 4 / XEON
 	  processors.  When enabled it will lower CPU temperature by skipping
@@ -96,9 +88,9 @@ config X86_P4_CLOCKMOD
 
 config X86_SPEEDSTEP_LIB
         tristate
-        depends on (X86_P4_CLOCKMOD)
-        default (X86_P4_CLOCKMOD)
+        default X86_P4_CLOCKMOD
 
+endif
 
 endmenu
 
_

Re: [PATCH] make gconfig build again

[Andrew Morton]

"J.A. Magallon" <jamagallon@able.es> wrote:
>
>  The patch caused those little pixmap buttons across the top of the main
>  > window to vanish when using gtk+-1.2.10-28.1.  See
>  > http://www.zip.com.au/~akpm/linux/patches/stuff/x.jpg.
>  > 
>  > I now note that scripts/kconfig/gconf.c doesn't compile at all with the
>  > above backout patch.  Drat.
>  > 
> 
>  This is enough to make it compile:

OK..  I still don't have pixmaps over "Collapse" and "Expand" though.

And I assume we're again broken with gtk-2.4?  What is the nature of that
breakage?

Re: 2.6.11-mm4

[Sean Neakums]

Andrew Morton <akpm@osdl.org> writes:

> Yes, the pmac cpufreq Kconfig dependencies are being troublesome.
>
> Roman sent this to Ben and I overnight:
>
>
> From: Roman Zippel <zippel@linux-m68k.org>
>
> This completes the Kconfig cleanup for all other archs.  CPU_FREQ_TABLE was
> moved to drivers/cpufreq/Kconfig and is selected as needed.

Seems to do the trick on ppc: with this patch applied, oldconfig
results in CONFIG_CPU_FREQ_TABLE=y.

-- 
Dag vijandelijk luchtschip de huismeester is dood

Re: 2.6.11-mm4

[Paul Mundt]

[-- Attachment #1: Type: text/plain, Size: 2059 bytes --]

On Wed, Mar 16, 2005 at 04:06:54AM -0800, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm4/
> 
sh and sh64 need xlate_dev_mem_ptr/xlate_dev_kmem_ptr definitions too..
otherwise end up with:

  LD      .tmp_vmlinux1
drivers/built-in.o(.text+0xf0): In function `read_mem':
mem.c: undefined reference to `xlate_dev_mem_ptr'
drivers/built-in.o(.text+0x210): In function `write_mem':
mem.c: undefined reference to `xlate_dev_mem_ptr'
drivers/built-in.o(.text+0x478): In function `read_kmem':
mem.c: undefined reference to `xlate_dev_kmem_ptr'
drivers/built-in.o(.text+0x628): In function `write_kmem':
mem.c: undefined reference to `xlate_dev_kmem_ptr'
make: *** [.tmp_vmlinux1] Error 1

 include/asm-sh/io.h   |   11 +++++++++++
 include/asm-sh64/io.h |   11 +++++++++++
 2 files changed, 22 insertions(+)

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

--- linux-sh-2.6.11-mm4.orig/include/asm-sh/io.h	2005-03-17 10:10:56.911518490 +0200
+++ linux-sh-2.6.11-mm4/include/asm-sh/io.h	2005-03-17 10:11:35.164242096 +0200
@@ -295,6 +295,17 @@
 #define dma_cache_wback(_start,_size) \
     __flush_wback_region(_start,_size)
 
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
 #endif /* __KERNEL__ */
 
 #endif /* __ASM_SH_IO_H */
--- linux-sh-2.6.11-mm4.orig/include/asm-sh64/io.h	2005-03-17 10:11:44.187997628 +0200
+++ linux-sh-2.6.11-mm4/include/asm-sh64/io.h	2005-03-17 10:12:26.554154928 +0200
@@ -235,5 +235,16 @@
 		asm volatile ("ocbwb	%0, 0" : : "r" (s));
 }
 
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH64_IO_H */

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: 2.6.11-mm4

[Borislav Petkov]

[-- Attachment #1: Type: text/plain, Size: 30094 bytes --]

<snip>
Hi there,

my mm4 wouldn't boot while mm3 works just fine. Here's the whole boot log:

Mar 17 09:19:28 zmei kernel: [4294667.296000] Linux version 2.6.11-mm4 (boris@zmei) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 SMP Wed Mar 16 21:42:25 CET 2005
Mar 17 09:19:28 zmei kernel: [4294667.296000] BIOS-provided physical RAM map:
Mar 17 09:19:28 zmei kernel: [4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 17 09:19:28 zmei kernel: [4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 17 09:19:28 zmei kernel: [4294667.296000]  BIOS-e820: 00000000000ce000 - 00000000000d60ac (reserved)
Mar 17 09:19:28 zmei kernel: [4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 17 09:19:28 zmei kernel: [4294667.296000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Mar 17 09:19:28 zmei kernel: [4294667.296000]  BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
Mar 17 09:19:28 zmei kernel: [4294667.296000]  BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
Mar 17 09:19:28 zmei kernel: [4294667.296000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Mar 17 09:19:28 zmei kernel: [4294667.296000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Mar 17 09:19:28 zmei kernel: [4294667.296000]  BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
Mar 17 09:19:28 zmei kernel: [4294667.296000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Mar 17 09:19:28 zmei kernel: [4294667.296000] 511MB LOWMEM available.
Mar 17 09:19:28 zmei kernel: [4294667.296000] found SMP MP-table at 000fbad0
Mar 17 09:19:28 zmei kernel: [4294667.296000] On node 0 totalpages: 131056
Mar 17 09:19:28 zmei kernel: [4294667.296000]   DMA zone: 4096 pages, LIFO batch:1
Mar 17 09:19:28 zmei kernel: [4294667.296000]   Normal zone: 126960 pages, LIFO batch:16
Mar 17 09:19:28 zmei kernel: [4294667.296000]   HighMem zone: 0 pages, LIFO batch:1
Mar 17 09:19:28 zmei kernel: [4294667.296000] DMI 2.3 present.
Mar 17 09:19:28 zmei kernel: [4294667.296000] ACPI: RSDP (v000 AMI                                   ) @ 0x000fa270
Mar 17 09:19:28 zmei kernel: [4294667.296000] ACPI: RSDT (v001 AMIINT INTEL845 0x00000010 MSFT 0x00000097) @ 0x1fff0000
Mar 17 09:19:28 zmei kernel: [4294667.296000] ACPI: FADT (v001 AMIINT INTEL845 0x00000011 MSFT 0x00000097) @ 0x1fff0030
Mar 17 09:19:28 zmei kernel: [4294667.296000] ACPI: MADT (v001 AMIINT INTEL845 0x00000009 MSFT 0x00000097) @ 0x1fff00c0
Mar 17 09:19:28 zmei kernel: [4294667.296000] ACPI: DSDT (v001  INTEL  P4I45GL 0x00001000 MSFT 0x0100000d) @ 0x00000000
Mar 17 09:19:28 zmei kernel: [4294667.296000] ACPI: Local APIC address 0xfee00000
Mar 17 09:19:28 zmei kernel: [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar 17 09:19:28 zmei kernel: [4294667.296000] Processor #0 15:2 APIC version 20
Mar 17 09:19:28 zmei kernel: [4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Mar 17 09:19:28 zmei kernel: [4294667.296000] Processor #1 15:2 APIC version 20
Mar 17 09:19:28 zmei kernel: [4294667.296000] Using ACPI for processor (LAPIC) configuration information
Mar 17 09:19:28 zmei kernel: [4294667.296000] Intel MultiProcessor Specification v1.4
Mar 17 09:19:28 zmei kernel: [4294667.296000]     Virtual Wire compatibility mode.
Mar 17 09:19:28 zmei kernel: [4294667.296000] OEM ID: INTEL    Product ID: I845GL       APIC at: 0xFEE00000
Mar 17 09:19:28 zmei kernel: [4294667.296000] I/O APIC #2 Version 32 at 0xFEC00000.
Mar 17 09:19:28 zmei kernel: [4294667.296000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Mar 17 09:19:28 zmei kernel: [4294667.296000] Processors: 2
Mar 17 09:19:28 zmei kernel: [4294667.296000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Mar 17 09:19:28 zmei kernel: [4294667.296000] Built 1 zonelists
Mar 17 09:19:28 zmei kernel: [4294667.296000] mapped APIC to ffffd000 (fee00000)
Mar 17 09:19:28 zmei kernel: [4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
Mar 17 09:19:28 zmei kernel: [4294667.296000] Initializing CPU#0
Mar 17 09:19:28 zmei kernel: [4294667.296000] Kernel command line: root=/dev/hda1 vga=0
Mar 17 09:19:28 zmei kernel: [4294667.296000] CPU 0 irqstacks, hard=c04c1000 soft=c04bf000
Mar 17 09:19:28 zmei kernel: [4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
Mar 17 09:19:28 zmei kernel: [    0.000000] Detected 2606.843 MHz processor.
Mar 17 09:19:28 zmei kernel: [   22.419992] Using tsc for high-res timesource
Mar 17 09:19:28 zmei kernel: [   22.420923] Console: colour VGA+ 80x25
Mar 17 09:19:28 zmei kernel: [   22.422053] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 17 09:19:28 zmei kernel: [   22.422892] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 17 09:19:28 zmei kernel: [   22.437591] Memory: 510040k/524224k available (2543k kernel code, 13696k reserved, 1078k data, 188k init, 0k highmem)
Mar 17 09:19:28 zmei kernel: [   22.437623] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar 17 09:19:28 zmei kernel: [   22.437889] Calibrating delay loop... 5144.57 BogoMIPS (lpj=2572288)
Mar 17 09:19:28 zmei kernel: [   22.459998] Security Framework v1.0.0 initialized
Mar 17 09:19:28 zmei kernel: [   22.460017] Capability LSM initialized
Mar 17 09:19:28 zmei kernel: [   22.460063] Mount-cache hash table entries: 512
Mar 17 09:19:28 zmei kernel: [   22.460278] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
Mar 17 09:19:28 zmei kernel: [   22.460289] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
Mar 17 09:19:28 zmei kernel: [   22.460299] CPU: Trace cache: 12K uops, L1 D cache: 8K
Mar 17 09:19:28 zmei kernel: [   22.460319] CPU: L2 cache: 512K
Mar 17 09:19:28 zmei kernel: [   22.460333] CPU: Physical Processor ID: 0
Mar 17 09:19:28 zmei kernel: [   22.460349] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Mar 17 09:19:28 zmei kernel: [   22.460357] Intel machine check architecture supported.
Mar 17 09:19:28 zmei kernel: [   22.460376] Intel machine check reporting enabled on CPU#0.
Mar 17 09:19:28 zmei kernel: [   22.460394] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Mar 17 09:19:28 zmei kernel: [   22.460412] CPU0: Thermal monitoring enabled
Mar 17 09:19:28 zmei kernel: [   22.460428] Enabling fast FPU save and restore... done.
Mar 17 09:19:28 zmei kernel: [   22.460448] Enabling unmasked SIMD FPU exception support... done.
Mar 17 09:19:28 zmei kernel: [   22.460471] Checking 'hlt' instruction... OK.
Mar 17 09:19:28 zmei kernel: [   22.464063] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
Mar 17 09:19:28 zmei kernel: [   22.464134] Booting processor 1/1 eip 2000
Mar 17 09:19:28 zmei kernel: [   22.464151] CPU 1 irqstacks, hard=c04c2000 soft=c04c0000
Mar 17 09:19:28 zmei kernel: [   22.474419] Initializing CPU#1
Mar 17 09:19:28 zmei kernel: [   22.475403] Calibrating delay loop... 5193.72 BogoMIPS (lpj=2596864)
Mar 17 09:19:28 zmei kernel: [   22.497826] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
Mar 17 09:19:28 zmei kernel: [   22.497834] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
Mar 17 09:19:28 zmei kernel: [   22.497844] CPU: Trace cache: 12K uops, L1 D cache: 8K
Mar 17 09:19:28 zmei kernel: [   22.497846] CPU: L2 cache: 512K
Mar 17 09:19:28 zmei kernel: [   22.497848] CPU: Physical Processor ID: 0
Mar 17 09:19:28 zmei kernel: [   22.497850] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Mar 17 09:19:28 zmei kernel: [   22.497857] Intel machine check architecture supported.
Mar 17 09:19:28 zmei kernel: [   22.497862] Intel machine check reporting enabled on CPU#1.
Mar 17 09:19:28 zmei kernel: [   22.497865] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
Mar 17 09:19:28 zmei kernel: [   22.497869] CPU1: Thermal monitoring enabled
Mar 17 09:19:28 zmei kernel: [   22.497924] CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
Mar 17 09:19:28 zmei kernel: [   22.498071] Total of 2 processors activated (10338.30 BogoMIPS).
Mar 17 09:19:28 zmei kernel: [   22.498166] ENABLING IO-APIC IRQs
Mar 17 09:19:28 zmei kernel: [   22.498354] ..TIMER: vector=0x31 pin1=2 pin2=0
Mar 17 09:19:28 zmei kernel: [   22.508222] testing NMI watchdog ... CPU#1: NMI appears to be stuck!
Mar 17 09:19:28 zmei kernel: [   22.619520] checking TSC synchronization across 2 CPUs: passed.
Mar 17 09:19:28 zmei kernel: [    0.000191] softlockup thread 0 started up.
Mar 17 09:19:28 zmei kernel: [    0.000995] Brought up 2 CPUs
Mar 17 09:19:28 zmei kernel: [    0.000999] softlockup thread 1 started up.
Mar 17 09:19:28 zmei kernel: [    0.001042] CPU0 attaching sched-domain:
Mar 17 09:19:28 zmei kernel: [    0.001045]  domain 0: span 3
Mar 17 09:19:28 zmei kernel: [    0.001048]   groups: 1 2
Mar 17 09:19:28 zmei kernel: [    0.001054]   domain 1: span 3
Mar 17 09:19:28 zmei kernel: [    0.001057]    groups: 3
Mar 17 09:19:28 zmei kernel: [    0.001062] CPU1 attaching sched-domain:
Mar 17 09:19:28 zmei kernel: [    0.001064]  domain 0: span 3
Mar 17 09:19:28 zmei kernel: [    0.001067]   groups: 2 1
Mar 17 09:19:28 zmei kernel: [    0.001072]   domain 1: span 3
Mar 17 09:19:28 zmei kernel: [    0.001075]    groups: 3
Mar 17 09:19:28 zmei kernel: [    0.002793] NET: Registered protocol family 16
Mar 17 09:19:28 zmei kernel: [    0.009421] PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=3
Mar 17 09:19:28 zmei kernel: [    0.009445] PCI: Using configuration type 1
Mar 17 09:19:28 zmei kernel: [    0.009461] mtrr: v2.0 (20020519)
Mar 17 09:19:28 zmei kernel: [    0.015235] Linux Plug and Play Support v0.97 (c) Adam Belay
Mar 17 09:19:28 zmei kernel: [    0.016297] usbcore: registered new driver usbfs
Mar 17 09:19:28 zmei kernel: [    0.016394] usbcore: registered new driver hub
Mar 17 09:19:28 zmei kernel: [    0.016607] PCI: Probing PCI hardware
Mar 17 09:19:28 zmei kernel: [    0.016624] PCI: Probing PCI hardware (bus 00)
Mar 17 09:19:28 zmei kernel: [    0.017244] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Mar 17 09:19:28 zmei kernel: [    0.017800] PCI: Transparent bridge - 0000:00:1e.0
Mar 17 09:19:28 zmei kernel: [    0.019398] PCI: Using IRQ router PIIX/ICH [8086/24c0] at 0000:00:1f.0
Mar 17 09:19:28 zmei kernel: [    0.019427] PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 16
Mar 17 09:19:28 zmei kernel: [    0.019446] PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
Mar 17 09:19:28 zmei kernel: [    0.019464] PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
Mar 17 09:19:28 zmei kernel: [    0.019483] PCI->APIC IRQ transform: 0000:00:1d.7[D] -> IRQ 23
Mar 17 09:19:28 zmei kernel: [    0.019504] PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 18
Mar 17 09:19:28 zmei kernel: [    0.019522] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
Mar 17 09:19:28 zmei kernel: [    0.019541] PCI->APIC IRQ transform: 0000:03:04.0[A] -> IRQ 17
Mar 17 09:19:28 zmei kernel: [    0.019559] PCI->APIC IRQ transform: 0000:03:06.0[A] -> IRQ 19
Mar 17 09:19:28 zmei kernel: [    0.019577] PCI->APIC IRQ transform: 0000:03:07.0[A] -> IRQ 16
Mar 17 09:19:28 zmei kernel: [    0.019595] PCI->APIC IRQ transform: 0000:03:07.1[A] -> IRQ 16
Mar 17 09:19:28 zmei kernel: [    0.019614] PCI->APIC IRQ transform: 0000:03:0a.0[A] -> IRQ 17
Mar 17 09:19:28 zmei kernel: [    0.025198] Machine check exception polling timer started.
Mar 17 09:19:28 zmei kernel: [    0.028790] inotify device minor=63
Mar 17 09:19:28 zmei kernel: [    0.029146] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Mar 17 09:19:28 zmei kernel: [    0.029920] Initializing Cryptographic API
Mar 17 09:19:28 zmei kernel: [    0.029941] kgdb <20030915.1651.33> : port =3f8, IRQ=4, divisor =1
Mar 17 09:19:28 zmei kernel: [    0.035811] Linux agpgart interface v0.101 (c) Dave Jones
Mar 17 09:19:28 zmei kernel: [    0.035936] agpgart: Detected an Intel 845G Chipset.
Mar 17 09:19:28 zmei kernel: [    0.038437] agpgart: AGP aperture is 64M @ 0xe0000000
Mar 17 09:19:28 zmei kernel: [    0.038560] [drm] Initialized drm 1.0.0 20040925
Mar 17 09:19:28 zmei kernel: [    0.038734] [drm] Initialized radeon 1.15.0 20050125 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 SE]
Mar 17 09:19:28 zmei kernel: [    0.039326] PNP: No PS/2 controller found. Probing ports directly.
Mar 17 09:19:28 zmei kernel: [    0.041086] serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 17 09:19:28 zmei kernel: [    0.041166] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 17 09:19:28 zmei kernel: [    0.041185] Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Mar 17 09:19:28 zmei kernel: [    0.042635] parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
Mar 17 09:19:28 zmei kernel: [    0.042689] parport0: irq 7 detected
Mar 17 09:19:28 zmei kernel: [    0.042937] io scheduler noop registered
Mar 17 09:19:28 zmei kernel: [    0.042978] io scheduler anticipatory registered
Mar 17 09:19:28 zmei kernel: [    0.043007] io scheduler deadline registered
Mar 17 09:19:28 zmei kernel: [    0.043060] io scheduler cfq registered
Mar 17 09:19:28 zmei kernel: [    0.043283] 8139too Fast Ethernet driver 0.9.27
Mar 17 09:19:28 zmei kernel: [    0.043676] eth0: RealTek RTL8139 at 0xe0816f00, 00:0c:6e:aa:a2:81, IRQ 17
Mar 17 09:19:28 zmei kernel: [    0.043695] eth0:  Identified 8139 chip type 'RTL-8101'
Mar 17 09:19:28 zmei kernel: [    0.043705] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar 17 09:19:28 zmei kernel: [    0.043724] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 17 09:19:28 zmei kernel: [    0.044005] ICH4: IDE controller at PCI slot 0000:00:1f.1
Mar 17 09:19:28 zmei kernel: [    0.044033] ICH4: chipset revision 2
Mar 17 09:19:28 zmei kernel: [    0.044049] ICH4: not 100%% native mode: will probe irqs later
Mar 17 09:19:28 zmei kernel: [    0.044073]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
Mar 17 09:19:28 zmei kernel: [    0.044116]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Mar 17 09:19:28 zmei kernel: [    0.044156] Probing IDE interface ide0...
Mar 17 09:19:28 zmei kernel: [    0.308295] hda: QUANTUM FIREBALLlct10 20, ATA DISK drive
Mar 17 09:19:28 zmei kernel: [    0.563604] hdb: IC35L120AVV207-0, ATA DISK drive
Mar 17 09:19:28 zmei kernel: [    0.615873] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 17 09:19:28 zmei kernel: [    0.616099] Probing IDE interface ide1...
Mar 17 09:19:28 zmei kernel: [    1.286642] hdc: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive
Mar 17 09:19:28 zmei kernel: [    1.541950] hdd: Maxtor 6Y160P0, ATA DISK drive
Mar 17 09:19:28 zmei kernel: [    1.593046] ide1 at 0x170-0x177,0x376 on irq 15
Mar 17 09:19:28 zmei kernel: [    1.593516] Probing IDE interface ide2...
Mar 17 09:19:28 zmei kernel: [    2.105290] Probing IDE interface ide3...
Mar 17 09:19:28 zmei kernel: [    2.616908] Probing IDE interface ide4...
Mar 17 09:19:28 zmei kernel: [    3.128523] Probing IDE interface ide5...
Mar 17 09:19:28 zmei kernel: [    3.640163] hda: max request size: 128KiB
Mar 17 09:19:28 zmei kernel: [    3.645049] hda: 39876480 sectors (20416 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(33)
Mar 17 09:19:28 zmei kernel: [    3.645091] hda: cache flushes not supported
Mar 17 09:19:28 zmei kernel: [    3.645248]  hda: hda1 hda2 hda3
Mar 17 09:19:28 zmei kernel: [    3.646875] hdb: max request size: 1024KiB
Mar 17 09:19:28 zmei kernel: [    3.655474] hdb: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
Mar 17 09:19:28 zmei kernel: [    3.656018] hdb: cache flushes supported
Mar 17 09:19:28 zmei kernel: [    3.656143]  hdb: hdb1
Mar 17 09:19:28 zmei kernel: [    3.665812] hdd: max request size: 1024KiB
Mar 17 09:19:28 zmei kernel: [    3.666700] hdd: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(33)
Mar 17 09:19:28 zmei kernel: [    3.666881] hdd: cache flushes supported
Mar 17 09:19:28 zmei kernel: [    3.667002]  hdd: hdd1
Mar 17 09:19:28 zmei kernel: [    3.671882] hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Mar 17 09:19:28 zmei kernel: [    3.671925] Uniform CD-ROM driver Revision: 3.20
Mar 17 09:19:28 zmei kernel: [    3.680704] ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
Mar 17 09:19:28 zmei kernel: [    3.680818] PCI: Setting latency timer of device 0000:00:1d.7 to 64
Mar 17 09:19:28 zmei kernel: [    3.680822] ehci_hcd 0000:00:1d.7: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
Mar 17 09:19:28 zmei kernel: [    3.680854] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
Mar 17 09:19:28 zmei kernel: [    3.680858] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
Mar 17 09:19:28 zmei kernel: [    3.680864] ehci_hcd 0000:00:1d.7: capability 10001 at 68
Mar 17 09:19:28 zmei kernel: [    3.695989] ehci_hcd 0000:00:1d.7: BIOS handoff succeeded
Mar 17 09:19:28 zmei kernel: [    3.696112] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Mar 17 09:19:28 zmei kernel: [    3.696146] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdffffc00
Mar 17 09:19:28 zmei kernel: [    3.696201] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Mar 17 09:19:28 zmei kernel: [    3.700085] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Mar 17 09:19:28 zmei kernel: [    3.700090] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
Mar 17 09:19:28 zmei kernel: [    3.700100] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Mar 17 09:19:28 zmei kernel: [    3.700126] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
Mar 17 09:19:28 zmei kernel: [    3.700158] usb usb1: default language 0x0409
Mar 17 09:19:28 zmei kernel: [    3.700179] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
Mar 17 09:19:28 zmei kernel: [    3.700182] usb usb1: Product: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
Mar 17 09:19:28 zmei kernel: [    3.700210] usb usb1: Manufacturer: Linux 2.6.11-mm3 ehci_hcd
Mar 17 09:19:28 zmei kernel: [    3.700226] usb usb1: SerialNumber: 0000:00:1d.7
Mar 17 09:19:28 zmei kernel: [    3.700256] usb usb1: hotplug
Mar 17 09:19:28 zmei kernel: [    3.700380] usb usb1: adding 1-0:1.0 (config #1, interface 0)
Mar 17 09:19:28 zmei kernel: [    3.700393] usb 1-0:1.0: hotplug
Mar 17 09:19:28 zmei kernel: [    3.700482] hub 1-0:1.0: usb_probe_interface
Mar 17 09:19:28 zmei kernel: [    3.700485] hub 1-0:1.0: usb_probe_interface - got id
Mar 17 09:19:28 zmei kernel: [    3.700487] hub 1-0:1.0: USB hub found
Mar 17 09:19:28 zmei kernel: [    3.700516] hub 1-0:1.0: 6 ports detected
Mar 17 09:19:28 zmei kernel: [    3.700531] hub 1-0:1.0: standalone hub
Mar 17 09:19:28 zmei kernel: [    3.700533] hub 1-0:1.0: ganged power switching
Mar 17 09:19:28 zmei kernel: [    3.700535] hub 1-0:1.0: individual port over-current protection
Mar 17 09:19:28 zmei kernel: [    3.700537] hub 1-0:1.0: Single TT
Mar 17 09:19:28 zmei kernel: [    3.700539] hub 1-0:1.0: TT requires at most 8 FS bit times
Mar 17 09:19:28 zmei kernel: [    3.700541] hub 1-0:1.0: power on to power good time: 20ms
Mar 17 09:19:28 zmei kernel: [    3.700551] hub 1-0:1.0: local power source is good
Mar 17 09:19:28 zmei kernel: [    3.700555] hub 1-0:1.0: enabling power on all ports
Mar 17 09:19:28 zmei kernel: [    3.721926] hub 1-0:1.0: state 5 ports 6 chg 0000 evt 0000
Mar 17 09:19:28 zmei kernel: [    3.721955] USB Universal Host Controller Interface driver v2.2
Mar 17 09:19:28 zmei kernel: [    3.722160] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Mar 17 09:19:28 zmei kernel: [    3.722165] uhci_hcd 0000:00:1d.0: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
Mar 17 09:19:28 zmei kernel: [    3.783866] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Mar 17 09:19:28 zmei kernel: [    3.783899] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e400
Mar 17 09:19:28 zmei kernel: [    3.783939] uhci_hcd 0000:00:1d.0: detected 2 ports
Mar 17 09:19:28 zmei kernel: [    3.784010] usb usb2: default language 0x0409
Mar 17 09:19:28 zmei kernel: [    3.784030] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
Mar 17 09:19:28 zmei kernel: [    3.784033] usb usb2: Product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
Mar 17 09:19:28 zmei kernel: [    3.784061] usb usb2: Manufacturer: Linux 2.6.11-mm3 uhci_hcd
Mar 17 09:19:28 zmei kernel: [    3.784078] usb usb2: SerialNumber: 0000:00:1d.0
Mar 17 09:19:28 zmei kernel: [    3.784106] usb usb2: hotplug
Mar 17 09:19:28 zmei kernel: [    3.784238] usb usb2: adding 2-0:1.0 (config #1, interface 0)
Mar 17 09:19:28 zmei kernel: [    3.784251] usb 2-0:1.0: hotplug
Mar 17 09:19:28 zmei kernel: [    3.784333] hub 2-0:1.0: usb_probe_interface
Mar 17 09:19:28 zmei kernel: [    3.784335] hub 2-0:1.0: usb_probe_interface - got id
Mar 17 09:19:28 zmei kernel: [    3.784337] hub 2-0:1.0: USB hub found
Mar 17 09:19:28 zmei kernel: [    3.784364] hub 2-0:1.0: 2 ports detected
Mar 17 09:19:28 zmei kernel: [    3.784379] hub 2-0:1.0: standalone hub
Mar 17 09:19:28 zmei kernel: [    3.784381] hub 2-0:1.0: no power switching (usb 1.0)
Mar 17 09:19:28 zmei kernel: [    3.784383] hub 2-0:1.0: individual port over-current protection
Mar 17 09:19:28 zmei kernel: [    3.784386] hub 2-0:1.0: power on to power good time: 2ms
Mar 17 09:19:28 zmei kernel: [    3.784396] hub 2-0:1.0: local power source is good
Mar 17 09:19:28 zmei kernel: [    3.787747] hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0000
Mar 17 09:19:28 zmei kernel: [    3.787785] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Mar 17 09:19:28 zmei kernel: [    3.787789] uhci_hcd 0000:00:1d.1: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
Mar 17 09:19:28 zmei kernel: [    3.849673] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Mar 17 09:19:28 zmei kernel: [    3.849705] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
Mar 17 09:19:28 zmei kernel: [    3.849746] uhci_hcd 0000:00:1d.1: detected 2 ports
Mar 17 09:19:28 zmei kernel: [    3.849809] usb usb3: default language 0x0409
Mar 17 09:19:28 zmei kernel: [    3.849828] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
Mar 17 09:19:28 zmei kernel: [    3.849831] usb usb3: Product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
Mar 17 09:19:28 zmei kernel: [    3.849860] usb usb3: Manufacturer: Linux 2.6.11-mm3 uhci_hcd
Mar 17 09:19:28 zmei kernel: [    3.849877] usb usb3: SerialNumber: 0000:00:1d.1
Mar 17 09:19:28 zmei kernel: [    3.849904] usb usb3: hotplug
Mar 17 09:19:28 zmei kernel: [    3.850011] usb usb3: adding 3-0:1.0 (config #1, interface 0)
Mar 17 09:19:28 zmei kernel: [    3.850036] usb 3-0:1.0: hotplug
Mar 17 09:19:28 zmei kernel: [    3.850111] hub 3-0:1.0: usb_probe_interface
Mar 17 09:19:28 zmei kernel: [    3.850113] hub 3-0:1.0: usb_probe_interface - got id
Mar 17 09:19:28 zmei kernel: [    3.850115] hub 3-0:1.0: USB hub found
Mar 17 09:19:28 zmei kernel: [    3.850143] hub 3-0:1.0: 2 ports detected
Mar 17 09:19:28 zmei kernel: [    3.850779] hub 3-0:1.0: standalone hub
Mar 17 09:19:28 zmei kernel: [    3.850781] hub 3-0:1.0: no power switching (usb 1.0)
Mar 17 09:19:28 zmei kernel: [    3.850783] hub 3-0:1.0: individual port over-current protection
Mar 17 09:19:28 zmei kernel: [    3.850785] hub 3-0:1.0: power on to power good time: 2ms
Mar 17 09:19:28 zmei kernel: [    3.850795] hub 3-0:1.0: local power source is good
Mar 17 09:19:28 zmei kernel: [    3.853568] hub 3-0:1.0: state 5 ports 2 chg 0000 evt 0000
Mar 17 09:19:28 zmei kernel: [    3.853605] PCI: Setting latency timer of device 0000:00:1d.2 to 64
Mar 17 09:19:28 zmei kernel: [    3.853610] uhci_hcd 0000:00:1d.2: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
Mar 17 09:19:28 zmei kernel: [    3.915495] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Mar 17 09:19:28 zmei kernel: [    3.915527] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
Mar 17 09:19:28 zmei kernel: [    3.915564] uhci_hcd 0000:00:1d.2: detected 2 ports
Mar 17 09:19:28 zmei kernel: [    3.915642] usb usb4: default language 0x0409
Mar 17 09:19:28 zmei kernel: [    3.915661] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
Mar 17 09:19:28 zmei kernel: [    3.915664] usb usb4: Product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
Mar 17 09:19:28 zmei kernel: [    3.915693] usb usb4: Manufacturer: Linux 2.6.11-mm3 uhci_hcd
Mar 17 09:19:28 zmei kernel: [    3.915710] usb usb4: SerialNumber: 0000:00:1d.2
Mar 17 09:19:28 zmei kernel: [    3.915738] usb usb4: hotplug
Mar 17 09:19:28 zmei kernel: [    3.915867] usb usb4: adding 4-0:1.0 (config #1, interface 0)
Mar 17 09:19:28 zmei kernel: [    3.915886] usb 4-0:1.0: hotplug
Mar 17 09:19:28 zmei kernel: [    3.915961] hub 4-0:1.0: usb_probe_interface
Mar 17 09:19:28 zmei kernel: [    3.915964] hub 4-0:1.0: usb_probe_interface - got id
Mar 17 09:19:28 zmei kernel: [    3.915966] hub 4-0:1.0: USB hub found
Mar 17 09:19:28 zmei kernel: [    3.915993] hub 4-0:1.0: 2 ports detected
Mar 17 09:19:28 zmei kernel: [    3.916009] hub 4-0:1.0: standalone hub
Mar 17 09:19:28 zmei kernel: [    3.916011] hub 4-0:1.0: no power switching (usb 1.0)
Mar 17 09:19:28 zmei kernel: [    3.916012] hub 4-0:1.0: individual port over-current protection
Mar 17 09:19:28 zmei kernel: [    3.916015] hub 4-0:1.0: power on to power good time: 2ms
Mar 17 09:19:28 zmei kernel: [    3.916024] hub 4-0:1.0: local power source is good
Mar 17 09:19:28 zmei kernel: [    3.919390] hub 4-0:1.0: state 5 ports 2 chg 0000 evt 0000
Mar 17 09:19:28 zmei kernel: [    3.919584] mice: PS/2 mouse device common for all mice
Mar 17 09:19:28 zmei kernel: [    3.919611] perfctr/x86.c: hyper-threaded P4s detected: restricting access for CPUs 1
Mar 17 09:19:28 zmei kernel: [    3.919752] Please email the following PERFCTR INIT lines to mikpe@csd.uu.se
Mar 17 09:19:28 zmei kernel: [    3.919753] To remove this message, rebuild the driver with CONFIG_PERFCTR_INIT_TESTS=n
Mar 17 09:19:28 zmei kernel: [    3.919796] PERFCTR INIT: vendor 0, family 15, model 2, stepping 9, clock 2606843 kHz
Mar 17 09:19:28 zmei kernel: [    3.919823] PERFCTR INIT: NITER == 64
Mar 17 09:19:28 zmei kernel: [    3.919849] PERFCTR INIT: loop overhead is 552 cycles
Mar 17 09:19:28 zmei kernel: [    3.919865] PERFCTR INIT: rdtsc cost is 81.5 cycles (5768 total)
Mar 17 09:19:28 zmei kernel: [    3.919883] PERFCTR INIT: rdpmc cost is 145.9 cycles (9892 total)
Mar 17 09:19:28 zmei kernel: [    3.919900] PERFCTR INIT: rdmsr (counter) cost is 255.0 cycles (16872 total)
Mar 17 09:19:28 zmei kernel: [    3.919919] PERFCTR INIT: rdmsr (escr) cost is 166.1 cycles (11188 total)
Mar 17 09:19:28 zmei kernel: [    3.919937] PERFCTR INIT: wrmsr (counter) cost is 801.3 cycles (51836 total)
Mar 17 09:19:28 zmei kernel: [    3.919955] PERFCTR INIT: wrmsr (escr) cost is 888.8 cycles (57436 total)
Mar 17 09:19:28 zmei kernel: [    3.919973] PERFCTR INIT: read cr4 cost is 5.1 cycles (880 total)
Mar 17 09:19:28 zmei kernel: [    3.919990] PERFCTR INIT: write cr4 cost is 254.0 cycles (16808 total)
Mar 17 09:19:28 zmei kernel: [    3.920008] PERFCTR INIT: rdpmc (fast) cost is 61.1 cycles (4468 total)
Mar 17 09:19:28 zmei kernel: [    3.920026] PERFCTR INIT: rdmsr (cccr) cost is 166.9 cycles (11236 total)
Mar 17 09:19:28 zmei kernel: [    3.920044] PERFCTR INIT: wrmsr (cccr) cost is 836.8 cycles (54112 total)
Mar 17 09:19:28 zmei kernel: [    3.920062] PERFCTR INIT: write LVTPC cost is 40.1 cycles (3124 total)
Mar 17 09:19:28 zmei kernel: [    3.920080] PERFCTR INIT: sync_core cost is 263.3 cycles (17408 total)
Mar 17 09:19:28 zmei kernel: [    3.920222] perfctr: driver 2.7.10, cpu type Intel P4 at 2606843 kHz
Mar 17 09:19:28 zmei kernel: [    3.920753] Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC).
Mar 17 09:19:28 zmei kernel: [    3.944752] input: AT Translated Set 2 keyboard on isa0060/serio0
Mar 17 09:19:28 zmei kernel: [    4.095357] ALSA device list:
Mar 17 09:19:28 zmei kernel: [    4.095375]   #0: Yamaha DS-XG (YMF724) at 0xdfef8000, irq 17
Mar 17 09:19:28 zmei kernel: [    4.095474] NET: Registered protocol family 2
Mar 17 09:19:28 zmei kernel: [    4.106967] IP: routing cache hash table of 2048 buckets, 32Kbytes
Mar 17 09:19:28 zmei kernel: [    4.107291] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
Mar 17 09:19:28 zmei kernel: [    4.108040] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
Mar 17 09:19:28 zmei kernel: [    4.108762] TCP: Hash tables configured (established 32768 bind 32768)
Mar 17 09:19:28 zmei kernel: [    4.108981] NET: Registered protocol family 1
Mar 17 09:19:28 zmei kernel: [    4.109006] NET: Registered protocol family 17
Mar 17 09:19:28 zmei kernel: [    4.109192] Starting balanced_irq
Mar 17 09:19:28 zmei kernel: [    4.109241] PM: Checking swsusp image.
Mar 17 09:19:28 zmei kernel: [    4.109244] PM: Resume from disk failed.
Mar 17 09:19:28 zmei kernel: [    4.112220] VFS: Mounted root (ext2 filesystem) readonly.
Mar 17 09:19:28 zmei kernel: [    4.112465] Freeing unused kernel memory: 188k freed
Mar 17 09:19:28 zmei kernel: [    4.142002] logips2pp: Detected unknown logitech mouse model 1
Mar 17 09:19:28 zmei kernel: [    4.274620] input: PS/2 Logitech Mouse on isa0060/serio1
[EOF]
<-- and here it stops waiting forever. What actually has to come next is the init 
process, i.e. something of the likes of:
INIT version x.xx loading
but it doesn't. And by the way, how do you debug this? serial console?

.config attached.

Regards,
Boris.

[-- Attachment #2: config-2.6.11-mm4 --]
[-- Type: text/plain, Size: 34368 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-mm4
# Thu Mar 17 08:33:48 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CLEAR_PAGES=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODE is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""

#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set
CONFIG_ACPI_BOOT=y

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_TRAP_BAD_SYSCALL_EXITS=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_ISCSI_IF is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
# CONFIG_IP_NF_CONNTRACK_MARK is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_KGDBOE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
CONFIG_I2C=m
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set

#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# SuperIO subsystem support
#
# CONFIG_SC_SUPERIO is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m

#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_YMFPCI=y
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_PWC is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_CACHEFS=m
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
CONFIG_FRAME_POINTER=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_KPROBES is not set
CONFIG_DEBUG_STACK_USAGE=y

#
# Page alloc debug is incompatible with Software Suspend on i386
#
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_KGDB=y
# CONFIG_KGDB_9600BAUD is not set
# CONFIG_KGDB_19200BAUD is not set
# CONFIG_KGDB_38400BAUD is not set
# CONFIG_KGDB_57600BAUD is not set
CONFIG_KGDB_115200BAUD=y
CONFIG_KGDB_PORT=0x3f8
CONFIG_KGDB_IRQ=4
# CONFIG_KGDB_MORE is not set
CONFIG_NO_KGDB_CPUS=2
# CONFIG_KGDB_TS is not set
CONFIG_STACK_OVERFLOW_TEST=y
CONFIG_KGDB_CONSOLE=y
CONFIG_KGDB_SYSRQ=y

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SECLVL=m
# CONFIG_SECURITY_SELINUX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y

Re: 2.6.11-mm4

[Andrew Morton]

Borislav Petkov <petkov@uni-muenster.de> wrote:
>
> Mar 17 09:19:28 zmei kernel: [    4.109241] PM: Checking swsusp image.
>  Mar 17 09:19:28 zmei kernel: [    4.109244] PM: Resume from disk failed.
>  Mar 17 09:19:28 zmei kernel: [    4.112220] VFS: Mounted root (ext2 filesystem) readonly.
>  Mar 17 09:19:28 zmei kernel: [    4.112465] Freeing unused kernel memory: 188k freed
>  Mar 17 09:19:28 zmei kernel: [    4.142002] logips2pp: Detected unknown logitech mouse model 1
>  Mar 17 09:19:28 zmei kernel: [    4.274620] input: PS/2 Logitech Mouse on isa0060/serio1
>  [EOF]
>  <-- and here it stops waiting forever. What actually has to come next is the init 
>  process, i.e. something of the likes of:
>  INIT version x.xx loading
>  but it doesn't. And by the way, how do you debug this? serial console?

Serial console would be useful.  Do sysrq-P and sysrq-T provide any info?

Re: 2.6.11-mm4

[Borislav Petkov]

On Thursday 17 March 2005 10:18, Andrew Morton wrote:
> Borislav Petkov <petkov@uni-muenster.de> wrote:
> > Mar 17 09:19:28 zmei kernel: [    4.109241] PM: Checking swsusp image.
> >  Mar 17 09:19:28 zmei kernel: [    4.109244] PM: Resume from disk failed.
> >  Mar 17 09:19:28 zmei kernel: [    4.112220] VFS: Mounted root (ext2
> > filesystem) readonly. Mar 17 09:19:28 zmei kernel: [    4.112465] Freeing
> > unused kernel memory: 188k freed Mar 17 09:19:28 zmei kernel: [   
> > 4.142002] logips2pp: Detected unknown logitech mouse model 1 Mar 17
> > 09:19:28 zmei kernel: [    4.274620] input: PS/2 Logitech Mouse on
> > isa0060/serio1 [EOF]
> >  <-- and here it stops waiting forever. What actually has to come next is
> > the init process, i.e. something of the likes of:
> >  INIT version x.xx loading
> >  but it doesn't. And by the way, how do you debug this? serial console?
>
> Serial console would be useful.  Do sysrq-P and sysrq-T provide any info?
Hmm, 
actually I haven't set up a serial console connection so let me try to 
establish one first and get back to you whenever I have some results.

Boris.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

Re: 2.6.11-mm4

[Borislav Petkov]

On Thursday 17 March 2005 10:42, Borislav Petkov wrote:
> On Thursday 17 March 2005 10:18, Andrew Morton wrote:
> > Borislav Petkov <petkov@uni-muenster.de> wrote:
> > > Mar 17 09:19:28 zmei kernel: [    4.109241] PM: Checking swsusp image.
> > >  Mar 17 09:19:28 zmei kernel: [    4.109244] PM: Resume from disk
> > > failed. Mar 17 09:19:28 zmei kernel: [    4.112220] VFS: Mounted root
> > > (ext2 filesystem) readonly. Mar 17 09:19:28 zmei kernel: [    4.112465]
> > > Freeing unused kernel memory: 188k freed Mar 17 09:19:28 zmei kernel: [
> > > 4.142002] logips2pp: Detected unknown logitech mouse model 1 Mar 17
> > > 09:19:28 zmei kernel: [    4.274620] input: PS/2 Logitech Mouse on
> > > isa0060/serio1 [EOF]
> > >  <-- and here it stops waiting forever. What actually has to come next
> > > is the init process, i.e. something of the likes of:
> > >  INIT version x.xx loading
> > >  but it doesn't. And by the way, how do you debug this? serial console?
> >
> > Serial console would be useful.  Do sysrq-P and sysrq-T provide any info?
>
> Hmm,
> actually I haven't set up a serial console connection so let me try to
> establish one first and get back to you whenever I have some results.
>
> Boris.

Hi again,

since I don't have a 9-pin serial port on my laptop I've been trying to 
connect it with the testing machine over a 25-pin cable (on a 25-pin port), 
which, according to the Serial-HOWTO is doable in theory but doesn't seem 
that easy to do in practice. Setserial reports that the ports are ok:

setserial -a /dev/ttyS1
/dev/ttyS1, Line 1, UART: 16550A, Port: 0x02f8, IRQ: 3
        Baud_base: 115200, close_delay: 50, divisor: 0
        closing_wait: 3000
        Flags: spd_normal skip_test

[other machine]:
setserial -a /dev/ttyS0
/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
        Baud_base: 115200, close_delay: 50, divisor: 0
        closing_wait: 3000
        Flags: spd_normal skip_test

but minicom or other serial line communication utils do not send or receive 
any chars. Any ideas?

Boris.

Re: 2.6.11-mm4

[Barry K. Nathan]

On Thu, Mar 17, 2005 at 12:07:55PM +0100, Borislav Petkov wrote:
> Hi again,
> 
> since I don't have a 9-pin serial port on my laptop I've been trying to 
> connect it with the testing machine over a 25-pin cable (on a 25-pin port), 
> which, according to the Serial-HOWTO is doable in theory but doesn't seem 
> that easy to do in practice. Setserial reports that the ports are ok:

On laptops, 25-pin ports tend to be parallel, rather than serial. At
least, that's my experience.

[snip]
> but minicom or other serial line communication utils do not send or receive 
> any chars. Any ideas?

Hook a printer up to the 25-pin port (the other end of the cable will
most likely have 36 pins), then use (I think, it's been a while)
/dev/lp0 as your console device, rather than /dev/ttyS#. This assumes
that your kernel has parallel console support compiled in, and that
the parallel port support is compiled in (as opposed to being a module).

And if you do the above, make sure to have lots of paper handy. Also,
this trick probably won't work with all printers, but it stands a good
chance of working.

-Barry K. Nathan <barryn@pobox.com>

Re: 2.6.11-mm4

[Borislav Petkov]

On Thursday 17 March 2005 14:41, Barry K. Nathan wrote:
> On Thu, Mar 17, 2005 at 12:07:55PM +0100, Borislav Petkov wrote:
> > Hi again,
> >
> > since I don't have a 9-pin serial port on my laptop I've been trying to
> > connect it with the testing machine over a 25-pin cable (on a 25-pin
> > port), which, according to the Serial-HOWTO is doable in theory but
> > doesn't seem that easy to do in practice. Setserial reports that the
> > ports are ok:
>
> On laptops, 25-pin ports tend to be parallel, rather than serial. At
> least, that's my experience.
And this is the truth, actually. It is :( a parallel port.
>
> [snip]
>
> > but minicom or other serial line communication utils do not send or
> > receive any chars. Any ideas?
>
> Hook a printer up to the 25-pin port (the other end of the cable will
> most likely have 36 pins), then use (I think, it's been a while)
> /dev/lp0 as your console device, rather than /dev/ttyS#. This assumes
> that your kernel has parallel console support compiled in, and that
> the parallel port support is compiled in (as opposed to being a module).
>
> And if you do the above, make sure to have lots of paper handy. Also,
> this trick probably won't work with all printers, but it stands a good
> chance of working.
This is an option but I don't have a printer right now so I think I'll go with 
another idea a guy gave me on our laptop forum - USB to serial adapter, it is 
relatively cheap (~20€ in Germany) and trivial to install. Still, thanks for 
your help, I'll be reporting as soon as I get the gadget.

Boris.
>
> -Barry K. Nathan <barryn@pobox.com>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

Re: 2.6.11-mm4

[Sam Ravnborg]

> If you swear to me it does not have to build under gtk-1.2 (which with
> current Makefile I do not know how can it be done), there are many stock
> things that can be done automagically in 2.x, and not manually like in gtk-1.2.

People running old systems running only gtk 1.2 always have menuconfig
as 'escape' possibility.
So the price paid to have a cleaner gconfig seems OK.

I recommend to remove the gtk 1.2 cruft and focus on gtk 2.x.
If you do please work on top of Linus' latest and not -mm.

	Sam

2.6.11-mm4: drivers/scsi/arcmsr/arcmsr.c: enormous stack usage

[Adrian Bunk]

On Wed, Mar 16, 2005 at 04:06:54AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.11-mm3:
>...
> +areca-raid-linux-scsi-driver.patch
> 
>  Updated version of this driver.
>...

<--  snip  -->

...
static int arcmsr_iop_ioctlcmd(PACB pACB, int ioctl_cmd, void *arg)
{
...
uint8_t tmpQbuffer[1032];
...
uint8_t tmpuserbuffer[1032];
...
}
...

<--  snip  -->


1kB allocations from the stack aren't a good idea considering that you 
might have only a 4kB stack altogether.


Running "make checkstack" after compiling the kernel helps you finding 
such problems.


cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

Re: 2.6.11-mm4: drivers/scsi/arcmsr/arcmsr.c: enormous stack usage

[Adrian Bunk]

On Mon, Mar 21, 2005 at 04:58:57PM +0800, erich wrote:

> Hi Dear All

Hi,

> I had modify  arcmsr_iop_ioctlcmd data buffer allocations from the stack
> issue.
>...

thanks, but an additional stack issue is still present (it's a bit more 
hidden):
- cmdioctlfld uses 1060 bytes from the stack

> Best Regards
> Erich Chen

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

2.6.11-mm4 and 2.6.12-rc1-mm1

[Borislav Petkov]

On Thursday 17 March 2005 10:18, Andrew Morton wrote:
> Borislav Petkov <petkov@uni-muenster.de> wrote:
> > Mar 17 09:19:28 zmei kernel: [    4.109241] PM: Checking swsusp image.
> >  Mar 17 09:19:28 zmei kernel: [    4.109244] PM: Resume from disk failed.
> >  Mar 17 09:19:28 zmei kernel: [    4.112220] VFS: Mounted root (ext2
> > filesystem) readonly. Mar 17 09:19:28 zmei kernel: [    4.112465] Freeing
> > unused kernel memory: 188k freed Mar 17 09:19:28 zmei kernel: [   
> > 4.142002] logips2pp: Detected unknown logitech mouse model 1 Mar 17
> > 09:19:28 zmei kernel: [    4.274620] input: PS/2 Logitech Mouse on
> > isa0060/serio1 [EOF]
> >  <-- and here it stops waiting forever. What actually has to come next is
> > the init process, i.e. something of the likes of:
> >  INIT version x.xx loading
> >  but it doesn't. And by the way, how do you debug this? serial console?
>
> Serial console would be useful.  Do sysrq-P and sysrq-T provide any info?
> -
<snip>

Hi Andrew,

I've tried 2.6.12-rc1-mm1 today and it stops booting at the same point as 
2.6.11-mm4. What might help is the info that rc1 boots just fine so it is 
something in the mm series that impedes the boot process. However, sysrq-P 
and sysrq-T do not provide anything - sysrq doesn't show any activity at all, 
i.e. it doesn't even print the usage info message. Infact, the keyboard is 
dead, it doesn't even turn on or off any lights (NumLock etc).

Any ideas? (Additional printk's added manually, etc..)

Regards,
Boris.

Re: 2.6.11-mm4 and 2.6.12-rc1-mm1

[Andrew Morton]

Borislav Petkov <petkov@uni-muenster.de> wrote:
>
> On Thursday 17 March 2005 10:18, Andrew Morton wrote:
> > Borislav Petkov <petkov@uni-muenster.de> wrote:
> > > Mar 17 09:19:28 zmei kernel: [    4.109241] PM: Checking swsusp image.
> > >  Mar 17 09:19:28 zmei kernel: [    4.109244] PM: Resume from disk failed.
> > >  Mar 17 09:19:28 zmei kernel: [    4.112220] VFS: Mounted root (ext2
> > > filesystem) readonly. Mar 17 09:19:28 zmei kernel: [    4.112465] Freeing
> > > unused kernel memory: 188k freed Mar 17 09:19:28 zmei kernel: [   
> > > 4.142002] logips2pp: Detected unknown logitech mouse model 1 Mar 17
> > > 09:19:28 zmei kernel: [    4.274620] input: PS/2 Logitech Mouse on
> > > isa0060/serio1 [EOF]
> > >  <-- and here it stops waiting forever. What actually has to come next is
> > > the init process, i.e. something of the likes of:
> > >  INIT version x.xx loading
> > >  but it doesn't. And by the way, how do you debug this? serial console?
> >
> > Serial console would be useful.  Do sysrq-P and sysrq-T provide any info?
> > -
> <snip>
> 
> Hi Andrew,
> 
> I've tried 2.6.12-rc1-mm1 today and it stops booting at the same point as 
> 2.6.11-mm4. What might help is the info that rc1 boots just fine so it is 
> something in the mm series that impedes the boot process. However, sysrq-P 
> and sysrq-T do not provide anything - sysrq doesn't show any activity at all, 
> i.e. it doesn't even print the usage info message. Infact, the keyboard is 
> dead, it doesn't even turn on or off any lights (NumLock etc).
> 
> Any ideas? (Additional printk's added manually, etc..)
> 

- Make sure that io-apic is enabled, boot with `nmi_watchdog=1'.

- Make sure that CONFIG_DETECT_SOFTLOCKUP is enabled

- Add `initcall_debug' to the boot command line, see if that tells us
  anything.

- Disable CONFIG_DEBUG_PAGEALLOC, if it was enabled

- Send me your .config.

kgdb is the way to diagnose this one.

Re: 2.6.11-mm4 and 2.6.12-rc1-mm1

[Borislav Petkov]

[-- Attachment #1: Type: text/plain, Size: 2337 bytes --]

On Wednesday 23 March 2005 11:17, Andrew Morton wrote:
> Borislav Petkov <petkov@uni-muenster.de> wrote:
> > On Thursday 17 March 2005 10:18, Andrew Morton wrote:
> > > Borislav Petkov <petkov@uni-muenster.de> wrote:
> > > > Mar 17 09:19:28 zmei kernel: [    4.109241] PM: Checking swsusp
> > > > image. Mar 17 09:19:28 zmei kernel: [    4.109244] PM: Resume from
> > > > disk failed. Mar 17 09:19:28 zmei kernel: [    4.112220] VFS: Mounted
> > > > root (ext2 filesystem) readonly. Mar 17 09:19:28 zmei kernel: [   
> > > > 4.112465] Freeing unused kernel memory: 188k freed Mar 17 09:19:28
> > > > zmei kernel: [ 4.142002] logips2pp: Detected unknown logitech mouse
> > > > model 1 Mar 17 09:19:28 zmei kernel: [    4.274620] input: PS/2
> > > > Logitech Mouse on isa0060/serio1 [EOF]
> > > >  <-- and here it stops waiting forever. What actually has to come
> > > > next is the init process, i.e. something of the likes of:
> > > >  INIT version x.xx loading
> > > >  but it doesn't. And by the way, how do you debug this? serial
> > > > console?
> > >
> > > Serial console would be useful.  Do sysrq-P and sysrq-T provide any
> > > info? -
> >
> > <snip>
> >
> > Hi Andrew,
> >
> > I've tried 2.6.12-rc1-mm1 today and it stops booting at the same point as
> > 2.6.11-mm4. What might help is the info that rc1 boots just fine so it is
> > something in the mm series that impedes the boot process. However,
> > sysrq-P and sysrq-T do not provide anything - sysrq doesn't show any
> > activity at all, i.e. it doesn't even print the usage info message.
> > Infact, the keyboard is dead, it doesn't even turn on or off any lights
> > (NumLock etc).
> >
> > Any ideas? (Additional printk's added manually, etc..)
>
> - Make sure that io-apic is enabled, boot with `nmi_watchdog=1'.
no results.
> - Make sure that CONFIG_DETECT_SOFTLOCKUP is enabled
yep
> - Add `initcall_debug' to the boot command line, see if that tells us
>   anything.
nothing
> - Disable CONFIG_DEBUG_PAGEALLOC, if it was enabled
it was disabled
> - Send me your .config.
attached.
> kgdb is the way to diagnose this one.
Yeah, this is going to take a while. I've ordered an usb-to-serial converter 
for my laptop so that I can connect it to the desktop machine over the serial 
port and this is gonna be here next week so then I'll give kgdb a try.

Regards,
Boris.

[-- Attachment #2: config-2.6.12-rc1-mm1 --]
[-- Type: text/plain, Size: 30172 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-mm1
# Thu Mar 24 08:04:48 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CLEAR_PAGES=y

#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODE is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_SECCOMP=y

#
# Performance-monitoring counters support
#
CONFIG_PERFCTR=y
CONFIG_PERFCTR_INIT_TESTS=y
CONFIG_PERFCTR_VIRTUAL=y
CONFIG_PERFCTR_INTERRUPT_SUPPORT=y
CONFIG_PERFCTR_CPUS_FORBIDDEN_MASK=y
CONFIG_PHYSICAL_START=0x100000

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y

#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set
CONFIG_ACPI_BOOT=y

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_TRAP_BAD_SYSCALL_EXITS=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_AOE_PARTITIONS=16

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_ISCSI_IF is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# TCP congestion control
#
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_VEGAS=m

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
# CONFIG_IP_NF_CONNTRACK_MARK is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_KGDBOE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#

#
# I2C support
#
CONFIG_I2C=m
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM90 is not set

#
# Other I2C Chip support
#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# SuperIO subsystem support
#

#
# Misc devices
#

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m

#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_YMFPCI=y
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_PWC is not set

#
# USB Network Adapters
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# Caches
#
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_HFSPLUS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_FRAME_POINTER=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_KPROBES is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_KGDB=y
# CONFIG_KGDB_9600BAUD is not set
# CONFIG_KGDB_19200BAUD is not set
# CONFIG_KGDB_38400BAUD is not set
# CONFIG_KGDB_57600BAUD is not set
CONFIG_KGDB_115200BAUD=y
CONFIG_KGDB_PORT=0x3f8
CONFIG_KGDB_IRQ=4
# CONFIG_KGDB_MORE is not set
CONFIG_NO_KGDB_CPUS=2
# CONFIG_KGDB_TS is not set
CONFIG_STACK_OVERFLOW_TEST=y
CONFIG_KGDB_CONSOLE=y
CONFIG_KGDB_SYSRQ=y

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SECLVL=m
# CONFIG_SECURITY_SELINUX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y