it87 and lm85 tickets

it87 and lm85 tickets

[Mark Studebaker]

it87 PWM on 2.6 kernels: tickets 1925, 1932
I think it87 PWM on 2.6 is a work in progress? Who's working on this?

lm85 new stepping 0x69: ticket 1933 (khali)

also is anybody able to tackle ticket 1906?

thanks
mds

it87 and lm85 tickets

[Reuben Farrelly]

Hi Philip,

Philip Pokorny wrote:
> Jean Delvare wrote:
> 
>>> lm85 new stepping 0x69: ticket 1933 (khali)
>>>   
>>
>>
>> I AM NOT THE LM85 GUY!
>>
>> The driver was written and is maintained by Philip Pokorny and Justin
>> Thiessen at Penguin Computing.
>>
>> #1933: [waiting for user data]
>>  
>>
> 
> So, I guess I *am* the LM85 guy.
> 
> Yes, please send or reply with 'i2c-dump 0 0x2e' when lm85 is *not* loaded.

Here you go..

[root@typhoon ~]# i2cdump 0 0x2e
No size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x2e, mode byte
Continue? [Y/n]
      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
20: 72 6d c8 c7 be 2c 27 2d d7 09 ff ff ff ff ff ff    rm???,'-??......
30: 4d 4d 4d 00 00 00 00 00 00 00 00 00 00 00 01 69    MMM...........?i
40: 05 00 00 00 00 ff 00 ff 00 ff 00 ff 00 ff 81 7f    ?.............??
50: 81 7f 81 7f ff ff ff ff ff ff ff ff 02 22 42 7a    ????........?"Bz
60: 8a 80 e8 88 4d 4d 4d 38 2d 37 45 41 4b 24 40 00    ????MMM8-7EAK$@.
70: 2f 26 2d 05 00 07 00 00 00 00 00 60 07 27 6e 56    /&-?.?.....`?'nV
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
[root@typhoon ~]#

Here is also the output of sensors-detect without lm85 or any other lm modules 
  loaded:

[root@typhoon ~]# sensors-detect

This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.

It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.

  IF THIS IS AN IBM THINKPAD, PRESS CTRL-C NOW!
  IBM Thinkpads have a severely broken i2c/SMBus implementation, just scanning
  the bus will break your Thinkpad forever!
  If this is a non-Thinkpad IBM, we still suggest you press CTRL+C. We have
  had users reporting system breakage on other IBM systems as well.

  We can start with probing for (PCI) I2C or SMBus adapters.
  You do not need any special privileges for this.
  Do you want to probe now? (YES/no):
[root@typhoon ~]# /etc/init.d/lm_sensors stop
Stopping lm_sensors:                                       [  OK  ]
[root@typhoon ~]#
[root@typhoon ~]#
[root@typhoon ~]# sensors-detect

This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.

It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.

  IF THIS IS AN IBM THINKPAD, PRESS CTRL-C NOW!
  IBM Thinkpads have a severely broken i2c/SMBus implementation, just scanning
  the bus will break your Thinkpad forever!
  If this is a non-Thinkpad IBM, we still suggest you press CTRL+C. We have
  had users reporting system breakage on other IBM systems as well.

  We can start with probing for (PCI) I2C or SMBus adapters.
  You do not need any special privileges for this.
  Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 00:1f.3: Intel ICH6
Probe succesfully concluded.

We will now try to load each adapter module in turn.
Load `i2c-i801' (say NO if built into your kernel)? (YES/no):
Module loaded succesfully.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

  To continue, we need module `i2c-dev' to be loaded.
  If it is built-in into your kernel, you can safely skip this.
i2c-dev is already loaded.

  We are now going to do the adapter probings. Some adapters may hang halfway
  through; we can't really help that. Also, some chips will be double detected;
  we choose the one with the highest confidence value in that case.
  If you found that the adapter hung after probing a certain address, you can
  specify that address to remain unprobed. That often
  includes address 0x69 (clock chip).

Next adapter: SMBus I801 adapter at c800
Do you want to scan it? (YES/no/selectively):
Client found at address 0x08
Client found at address 0x2e
Probing for `Myson MTP008'... Failed!
Probing for `National Semiconductor LM78'... Failed!
Probing for `National Semiconductor LM78-J'... Failed!
Probing for `National Semiconductor LM79'... Failed!
Probing for `National Semiconductor LM80'... Failed!
Probing for `National Semiconductor LM85 or LM96000'... Success!
     (confidence 7, driver `lm85')
Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... Failed!
Probing for `SMSC EMC6D100 or EMC6D101'... Failed!
Probing for `Analog Devices ADT7467'... Failed!
Probing for `National Semiconductor LM87'... Failed!
Probing for `National Semiconductor LM93'... Failed!
Probing for `Winbond W83781D'... Failed!
Probing for `Winbond W83782D'... Failed!
Probing for `Winbond W83791D'... Failed!
Probing for `Winbond W83792D'... Failed!
Probing for `Winbond W83627HF'... Failed!
Probing for `Asus AS99127F (rev.1)'... Failed!
Probing for `Asus AS99127F (rev.2)'... Failed!
Probing for `Asus ASB100 Bach'... Failed!
Probing for `Winbond W83L785TS-S'... Failed!
Probing for `Analog Devices ADM9240'... Failed!
Probing for `Dallas Semiconductor DS1780'... Failed!
Probing for `National Semiconductor LM81'... Failed!
Probing for `Analog Devices ADM1026'... Failed!
Probing for `Analog Devices ADM1025'... Failed!
Probing for `Analog Devices ADM1024'... Failed!
Probing for `Analog Devices ADM1029'... Failed!
Probing for `Analog Devices ADM1030'... Failed!
Probing for `Analog Devices ADM1031'... Failed!
Probing for `Analog Devices ADM1022'... Failed!
Probing for `Texas Instruments THMC50'... Failed!
Probing for `Analog Devices ADM1028'... Failed!
Probing for `ITE IT8705F / IT8712F / SiS 950'... Failed!
Client found at address 0x30
Client found at address 0x32
Client found at address 0x44
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Client found at address 0x50
Probing for `SPD EEPROM'... Success!
     (confidence 8, driver `eeprom')
Probing for `DDC monitor'... Failed!
Probing for `Maxim MAX6900'... Failed!
Client found at address 0x51
Probing for `SPD EEPROM'... Success!
     (confidence 8, driver `eeprom')
Client found at address 0x52
Probing for `SPD EEPROM'... Success!
     (confidence 8, driver `eeprom')
Client found at address 0x53
Probing for `SPD EEPROM'... Success!
     (confidence 8, driver `eeprom')
Client found at address 0x69

Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.

Do you want to scan the ISA bus? (YES/no):
Probing for `National Semiconductor LM78'
   Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
   Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
   Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
   Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
   Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
   Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
   Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
   Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
   Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
   Trying general detect... Failed!
Probing for `ITE IT8705F / IT8712F / SiS 950'
   Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
   Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
   Trying address 0x0ca8... Failed!

Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.

Do you want to scan for Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
   Failed! (0x7401)
Probing for `ITE 8705F Super IO Sensors'
   Failed! (0x7401)
Probing for `ITE 8712F Super IO Sensors'
   Failed! (0x7401)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
   Failed! (0x74)
Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
   Failed! (0x74)
Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
   Failed! (0x74)
Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
   Failed! (0x74)
Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
   Failed! (0x74)
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
   Failed! (0x74)
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
   Failed! (0x74)
Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
   Failed! (0x74)
Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
   Failed! (0x74)
Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
   Failed! (0x74)
Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
   Failed! (0x74)
Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
   Failed! (0x74)
Probing for `Nat. Semi. PC8739x Super IO'
   Failed! (0x74)
Probing for `Nat. Semi. PC8741x Super IO'
   Failed! (0x74)
Probing for `SMSC 47B27x Super IO Fan Sensors'
   Failed! (0x74)
Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
   Failed! (0x74)
Probing for `SMSC 47M14x Super IO Fan Sensors'
   Failed! (0x74)
Probing for `SMSC 47M15x/192 Super IO Fan Sensors'
   Failed! (0x74)
Probing for `SMSC 47S42x Super IO Fan Sensors'
   Failed! (0x74)
Probing for `SMSC 47S45x Super IO Fan Sensors'
   Failed! (0x74)
Probing for `SMSC 47M172 Super IO'
   Failed! (0x74)
Probing for `VT1211 Super IO Sensors'
   Failed! (skipping family)

Do you want to scan for secondary Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
   Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
   Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
   Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
   Failed! (skipping family)

  Now follows a summary of the probes I have just done.
  Just press ENTER to continue:

Driver `lm85' (should be inserted):
   Detects correctly:
   * Bus `SMBus I801 adapter at c800' (Algorithm unavailable)
     Busdriver `i2c-i801', I2C address 0x2e
     Chip `National Semiconductor LM85 or LM96000' (confidence: 7)

Driver `eeprom' (should be inserted):
   Detects correctly:
   * Bus `SMBus I801 adapter at c800' (Algorithm unavailable)
     Busdriver `i2c-i801', I2C address 0x50
     Chip `SPD EEPROM' (confidence: 8)
   * Bus `SMBus I801 adapter at c800' (Algorithm unavailable)
     Busdriver `i2c-i801', I2C address 0x51
     Chip `SPD EEPROM' (confidence: 8)
   * Bus `SMBus I801 adapter at c800' (Algorithm unavailable)
     Busdriver `i2c-i801', I2C address 0x52
     Chip `SPD EEPROM' (confidence: 8)
   * Bus `SMBus I801 adapter at c800' (Algorithm unavailable)
     Busdriver `i2c-i801', I2C address 0x53
     Chip `SPD EEPROM' (confidence: 8)


  I will now generate the commands needed to load the I2C modules.
  Sometimes, a chip is available both through the ISA bus and an I2C bus.
  ISA bus access is faster, but you need to load an additional driver module
  for it. If you have the choice, do you want to use the ISA bus or the
  I2C/SMBus (ISA/smbus)?

To make the sensors modules behave correctly, add these lines to
/etc/modules.conf:

#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----

To load everything that is needed, add this to some /etc/rc* file:

#----cut here----
# I2C adapter drivers
modprobe i2c-i801
# I2C chip drivers
modprobe lm85
modprobe eeprom
# sleep 2 # optional
/usr/bin/sensors -s # recommended
#----cut here----

WARNING! If you have some things built into your kernel, the list above
will contain too many modules. Skip the appropriate ones! You really should
try these commands right now to make sure everything is working properly.
Monitoring programs won't work until it's done.

Do you want to generate /etc/sysconfig/lm_sensors? (YES/no):
Copy prog/init/lm_sensors.init to /etc/rc.d/init.d/lm_sensors
for initialization at boot time.
[root@typhoon ~]#

The chip is pretty hard to locate on the board but if it's really necessary I 
can try again :(

reuben

it87 and lm85 tickets

[Philip Pokorny]

Jean Delvare wrote:

>>lm85 new stepping 0x69: ticket 1933 (khali)
>>    
>>
>
>I AM NOT THE LM85 GUY!
>
>The driver was written and is maintained by Philip Pokorny and Justin
>Thiessen at Penguin Computing.
>
>#1933: [waiting for user data]
>  
>

So, I guess I *am* the LM85 guy.

Yes, please send or reply with 'i2c-dump 0 0x2e' when lm85 is *not* loaded.

Thanks,
:v)

it87 and lm85 tickets

[Jean Delvare]

> it87 PWM on 2.6 kernels: tickets 1925, 1932
> I think it87 PWM on 2.6 is a work in progress? Who's working on this?

#1925: [solved] Motherboard seems to lack PWM support

#1932: [solved] Broken BIOS, needed to force PWM, then it works

> lm85 new stepping 0x69: ticket 1933 (khali)

I AM NOT THE LM85 GUY!

The driver was written and is maintained by Philip Pokorny and Justin
Thiessen at Penguin Computing.

#1933: [waiting for user data]

> also is anybody able to tackle ticket 1906?

I answered as much as I could, which is not much. The guy should really
come and help us, as he seems to have more knowledge about our stuff
than we do ourselves ;)

Thanks,
-- 
Jean Delvare

it87 and lm85 tickets

[Jean Delvare]

> So, most likely this is a later version of the lm96000.

My conclusion exactly.

> You might check again.  But instead of looking for a chip with
> "LM85", look for a 24-pin surface mount package with "LM96???" on
> it.  It will be smaller than the keys on your keyboard, but larger
> than the tip of a  pen or pencil.

Intel has some docs:
ftp://download.intel.com/design/motherbd/cv/C6859702.pdf

Page 38 there is a drawing, the LM9600 would be "C", i.e. between CPU
and memory slots.

-- 
Jean Delvare

it87 and lm85 tickets

[Philip Pokorny]

Reuben Farrelly wrote:

> Hi Philip,
>
> Philip Pokorny wrote:
>
>> Jean Delvare wrote:
>>
>>>> lm85 new stepping 0x69: ticket 1933 (khali)
>>>>   
>>>
>>>
>>>
>>> I AM NOT THE LM85 GUY!
>>>
>>> The driver was written and is maintained by Philip Pokorny and Justin
>>> Thiessen at Penguin Computing.
>>>
>>> #1933: [waiting for user data]
>>>  
>>>
>>
>> So, I guess I *am* the LM85 guy.
>>
>> Yes, please send or reply with 'i2c-dump 0 0x2e' when lm85 is *not* 
>> loaded.
>
>
> Here you go..
>
> [root@typhoon ~]# i2cdump 0 0x2e
> No size specified (using byte-data access)
> WARNING! This program can confuse your I2C bus, cause data loss and 
> worse!
> I will probe file /dev/i2c-0, address 0x2e, mode byte
> Continue? [Y/n]
>      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
> 30: 4d 4d 4d 00 00 00 00 00 00 00 00 00 00 00 01 69    MMM...........?i


So this says that it's a National Semiconductor part (0x3e is 0x01) and 
that's it's *not* an LM85 (0x3f is 0x69) but according to the lm96000 
datasheet it is a superset of the lm85 functionality.  Unfortunately, 
the only value listed for 0x3f in the lm96000 datasheet is 0x68.

So, most likely this is a later version of the lm96000.

>
> Probing for `National Semiconductor LM85 or LM96000'... Success!
>     (confidence 7, driver `lm85')


That's helpful.  Thanks Khali...

>
> The chip is pretty hard to locate on the board but if it's really 
> necessary I can try again :(


You might check again.  But instead of looking for a chip with "LM85", 
look for a 24-pin surface mount package with "LM96???" on it.  It will 
be smaller than the keys on your keyboard, but larger than the tip of a 
pen or pencil.

I'll review the LM96000 datasheet and see if there is any additional 
functionality we might want to add to the lm85 driver.

:v)

it87 and lm85 tickets

[Philip Pokorny]

Sorry, got distracted.

The one hichup I did find from going over the datasheet is that a 
previously "reserved" bit in the "Zone Range/Fan Frequency" register is 
now defined and affects the PWM frequency.  So we need to be careful to 
clear that bit or we have to extend the frequency possibilities.

Does this patch need to be for both 2.6 and 2.4/lm_sensors2?

Thanks,
:v)

Mark Studebaker wrote:

> reminder we need a patch for this from Philip - or are  you waiting 
> for verification from Reuben
> that the chip is on the board?
> ticket 1933
> mds
>
> Philip Pokorny wrote:
>
>> Reuben Farrelly wrote:
>>
>>> Hi Philip,
>>>
>>> Philip Pokorny wrote:
>>>
>>>> Jean Delvare wrote:
>>>>
>>>>>> lm85 new stepping 0x69: ticket 1933 (khali)
>>>>>>   
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> I AM NOT THE LM85 GUY!
>>>>>
>>>>> The driver was written and is maintained by Philip Pokorny and Justin
>>>>> Thiessen at Penguin Computing.
>>>>>
>>>>> #1933: [waiting for user data]
>>>>>  
>>>>>
>>>>
>>>> So, I guess I *am* the LM85 guy.
>>>>
>>>> Yes, please send or reply with 'i2c-dump 0 0x2e' when lm85 is *not* 
>>>> loaded.
>>>
>>>
>>>
>>>
>>> Here you go..
>>>
>>> [root@typhoon ~]# i2cdump 0 0x2e
>>> No size specified (using byte-data access)
>>> WARNING! This program can confuse your I2C bus, cause data loss and 
>>> worse!
>>> I will probe file /dev/i2c-0, address 0x2e, mode byte
>>> Continue? [Y/n]
>>>      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
>>> 30: 4d 4d 4d 00 00 00 00 00 00 00 00 00 00 00 01 69    MMM...........?i
>>
>>
>>
>>
>> So this says that it's a National Semiconductor part (0x3e is 0x01) 
>> and that's it's *not* an LM85 (0x3f is 0x69) but according to the 
>> lm96000 datasheet it is a superset of the lm85 functionality.  
>> Unfortunately, the only value listed for 0x3f in the lm96000 
>> datasheet is 0x68.
>>
>> So, most likely this is a later version of the lm96000.
>>
>>>
>>> Probing for `National Semiconductor LM85 or LM96000'... Success!
>>>     (confidence 7, driver `lm85')
>>
>>
>>
>>
>> That's helpful.  Thanks Khali...
>>
>>>
>>> The chip is pretty hard to locate on the board but if it's really 
>>> necessary I can try again :(
>>
>>
>>
>>
>> You might check again.  But instead of looking for a chip with 
>> "LM85", look for a 24-pin surface mount package with "LM96???" on 
>> it.  It will be smaller than the keys on your keyboard, but larger 
>> than the tip of a pen or pencil.
>>
>> I'll review the LM96000 datasheet and see if there is any additional 
>> functionality we might want to add to the lm85 driver.
>>
>> :v)
>>
>
>

it87 and lm85 tickets

[Mark Studebaker]

reminder we need a patch for this from Philip - or are  you waiting for verification from Reuben
that the chip is on the board?
ticket 1933
mds

Philip Pokorny wrote:
> Reuben Farrelly wrote:
> 
>> Hi Philip,
>>
>> Philip Pokorny wrote:
>>
>>> Jean Delvare wrote:
>>>
>>>>> lm85 new stepping 0x69: ticket 1933 (khali)
>>>>>   
>>>>
>>>>
>>>>
>>>>
>>>> I AM NOT THE LM85 GUY!
>>>>
>>>> The driver was written and is maintained by Philip Pokorny and Justin
>>>> Thiessen at Penguin Computing.
>>>>
>>>> #1933: [waiting for user data]
>>>>  
>>>>
>>>
>>> So, I guess I *am* the LM85 guy.
>>>
>>> Yes, please send or reply with 'i2c-dump 0 0x2e' when lm85 is *not* 
>>> loaded.
>>
>>
>>
>> Here you go..
>>
>> [root@typhoon ~]# i2cdump 0 0x2e
>> No size specified (using byte-data access)
>> WARNING! This program can confuse your I2C bus, cause data loss and 
>> worse!
>> I will probe file /dev/i2c-0, address 0x2e, mode byte
>> Continue? [Y/n]
>>      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
>> 30: 4d 4d 4d 00 00 00 00 00 00 00 00 00 00 00 01 69    MMM...........?i
> 
> 
> 
> So this says that it's a National Semiconductor part (0x3e is 0x01) and 
> that's it's *not* an LM85 (0x3f is 0x69) but according to the lm96000 
> datasheet it is a superset of the lm85 functionality.  Unfortunately, 
> the only value listed for 0x3f in the lm96000 datasheet is 0x68.
> 
> So, most likely this is a later version of the lm96000.
> 
>>
>> Probing for `National Semiconductor LM85 or LM96000'... Success!
>>     (confidence 7, driver `lm85')
> 
> 
> 
> That's helpful.  Thanks Khali...
> 
>>
>> The chip is pretty hard to locate on the board but if it's really 
>> necessary I can try again :(
> 
> 
> 
> You might check again.  But instead of looking for a chip with "LM85", 
> look for a 24-pin surface mount package with "LM96???" on it.  It will 
> be smaller than the keys on your keyboard, but larger than the tip of a 
> pen or pencil.
> 
> I'll review the LM96000 datasheet and see if there is any additional 
> functionality we might want to add to the lm85 driver.
> 
> :v)
> 

it87 and lm85 tickets

[Jean Delvare]

Hi Philip,

> The one hichup I did find from going over the datasheet is that a 
> previously "reserved" bit in the "Zone Range/Fan Frequency" register
> is  now defined and affects the PWM frequency.  So we need to be
> careful to  clear that bit or we have to extend the frequency
> possibilities.
> 
> Does this patch need to be for both 2.6 and 2.4/lm_sensors2?

Yes, one for each please. They shouldn't be all that different.

-- 
Jean Delvare

[lm-sensors] Re: it87 and lm85 tickets

[Reuben Farrelly]

Hi all,

[this is a resend, previously resent to the old mailing list address a few days 
ago which now bounces]

Not sure where we got with this bug (started off at 
http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket\x1933) but thought I'd 
follow up, as I may have been the one holding things up in the past.

Note that this is with my second (slightly older) Intel board, completely 
separate issue to the ADT7476ARQZ chip detection which I posted about earlier today.

On 29/03/2005 4:15 a.m., Philip Pokorny wrote:
> Reuben Farrelly wrote:
> 
>> Hi Philip,
>>
>> Philip Pokorny wrote:
>>
>>> Jean Delvare wrote:
>>>
>>>>> lm85 new stepping 0x69: ticket 1933 (khali)
>>>>>   
>>>>
>>>>
>>>>
>>>> I AM NOT THE LM85 GUY!
>>>>
>>>> The driver was written and is maintained by Philip Pokorny and Justin
>>>> Thiessen at Penguin Computing.
>>>>
>>>> #1933: [waiting for user data]
>>>>  
>>>>
>>>
>>> So, I guess I *am* the LM85 guy.
>>>
>>> Yes, please send or reply with 'i2c-dump 0 0x2e' when lm85 is *not* 
>>> loaded.
>>
>>
>> Here you go..
>>
>> [root@typhoon ~]# i2cdump 0 0x2e
>> No size specified (using byte-data access)
>> WARNING! This program can confuse your I2C bus, cause data loss and 
>> worse!
>> I will probe file /dev/i2c-0, address 0x2e, mode byte
>> Continue? [Y/n]
>>      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
>> 30: 4d 4d 4d 00 00 00 00 00 00 00 00 00 00 00 01 69    MMM...........?i
> 
> 
> So this says that it's a National Semiconductor part (0x3e is 0x01) and 
> that's it's *not* an LM85 (0x3f is 0x69) but according to the lm96000 
> datasheet it is a superset of the lm85 functionality.  Unfortunately, 
> the only value listed for 0x3f in the lm96000 datasheet is 0x68.
> 
> So, most likely this is a later version of the lm96000.
> 
>>
>> Probing for `National Semiconductor LM85 or LM96000'... Success!
>>     (confidence 7, driver `lm85')
> 
> 
> That's helpful.  Thanks Khali...
> 
>>
>> The chip is pretty hard to locate on the board but if it's really 
>> necessary I can try again :(
> 
> 
> You might check again.  But instead of looking for a chip with "LM85", 
> look for a 24-pin surface mount package with "LM96???" on it.  It will 
> be smaller than the keys on your keyboard, but larger than the tip of a 
> pen or pencil.

I've put a picture of the chip up online at http://www.reub.net/files/kernel/
and can confirm that it is an LM96000 chip.

This is still an issue in current kernels (2.6.15-rc2-mm1 at least), as I'm 
still seeing the warning message when booting up:

i2c_adapter i2c-0: Unrecognized version/stepping 0x69 Defaulting to LM85.

Is there anything else I can do to get the ball rolling on this again?

Most if not all of the functionality is there with the LM85 so it's not a 
showstopper.

Thanks,
Reuben