* [Bridge] Enable Bridgeing with a unsupported Eth devices
@ 2005-04-21 10:28 bharathi
2005-04-22 1:45 ` Stephen Hemminger
0 siblings, 1 reply; 2+ messages in thread
From: bharathi @ 2005-04-21 10:28 UTC (permalink / raw)
To: bridge
Hi All,
What should I do if I need to enable bridging in
unsupported adaptec ANA7711F fiber Ethernet cards. What should i do
with the kernel
bridge source. Plz give me some pointers.
Thanks,
bharthix.
http://bharthix.tk/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Bridge] Enable Bridgeing with a unsupported Eth devices
2005-04-21 10:28 [Bridge] Enable Bridgeing with a unsupported Eth devices bharathi
@ 2005-04-22 1:45 ` Stephen Hemminger
0 siblings, 0 replies; 2+ messages in thread
From: Stephen Hemminger @ 2005-04-22 1:45 UTC (permalink / raw)
To: bharathi; +Cc: bridge
On Thu, 21 Apr 2005 15:58:08 +0530
bharathi <bharathi@au-kbc.org> wrote:
> Hi All,
> What should I do if I need to enable bridging in
> unsupported adaptec ANA7711F fiber Ethernet cards. What should i do
> with the kernel
> bridge source. Plz give me some pointers.
>
> Thanks,
> bharthix.
> http://bharthix.tk/
You need to get/build/find a ethernet device driver. Bridging expects
the device to look like a ethernet device and interfaces with it.
There is a linux driver on adaptec's web site but it is a huge TOE type device
and probably won't work for bridging. TOE is crap
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-04-22 1:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-21 10:28 [Bridge] Enable Bridgeing with a unsupported Eth devices bharathi
2005-04-22 1:45 ` Stephen Hemminger
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.