* Problem recognizing P4-M
@ 2005-04-26 4:46 Paul Swartz
2005-04-26 8:17 ` Thomas Renninger
2005-05-04 20:58 ` Dominik Brodowski
0 siblings, 2 replies; 5+ messages in thread
From: Paul Swartz @ 2005-04-26 4:46 UTC (permalink / raw)
To: cpufreq
[-- Attachment #1.1.1: Type: text/plain, Size: 865 bytes --]
I've checked all over the internet, but I've had no luck finding the
answer to this problem. I have what looks to be a Mobile Intel Pentium
4 at 2.66Ghz. It's supported (sort of) by the p4-clockmod and
acpi-cpufreq modules, but it seems like it should be supported by one of
the speedstep modules. However, whenever I try to insert the
speedstep-ich module, I get this:
FATAL: Error inserting speedstep_ich
(/lib/modules/2.6.10-5-686/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-ich.ko): No such device
I get the same error under 2.6.10 (Ubuntu) and 2.6.11 (from the tree).
Attached are the output from 'cat /proc/cpuinfo' and 'x86info -a'.
Thanks in advance for any advice you might have,
-p
--
Paul Swartz
(o_ http://z3p.livejournal.com/ _o)
//\ z3p@twistedmatrix.com /\\
V_/_ AIM: z3penguin _\_V->
[-- Attachment #1.1.2: cpuinfo --]
[-- Type: text/plain, Size: 462 bytes --]
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Mobile Intel(R) Pentium(R) 4 CPU 2.66GHz
stepping : 9
cpu MHz : 2658.563
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips : 5242.88
[-- Attachment #1.1.3: x86info --]
[-- Type: text/plain, Size: 3118 bytes --]
x86info v1.12b. Dave Jones 2001-2003
Feedback to <davej@redhat.com>.
Found 1 CPU
--------------------------------------------------------------------------
eax in: 0x00000000, eax = 00000002 ebx = 756e6547 ecx = 6c65746e edx = 49656e69
eax in: 0x00000001, eax = 00000f29 ebx = 00010808 ecx = 00004400 edx = bfebf9ff
eax in: 0x00000002, eax = 665b5101 ebx = 00000000 ecx = 00000000 edx = 007b7040
eax in: 0x80000000, eax = 80000004 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000001, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000002, eax = 4d202020 ebx = 6c69626f ecx = 6e492065 edx = 286c6574
eax in: 0x80000003, eax = 50202952 ebx = 69746e65 ecx = 52286d75 edx = 20342029
eax in: 0x80000004, eax = 20202020 ebx = 20555043 ecx = 36362e32 edx = 007a4847
Family: 15 Model: 2 Stepping: 9 Type: 0 Brand: 8
CPU Model: Pentium 4 (Northwood) [D1] Original OEM
Processor name string: Mobile Intel(R) Pentium(R) 4 CPU 2.66GHz
Feature flags:
Onboard FPU
Virtual Mode Extensions
Debugging Extensions
Page Size Extensions
Time Stamp Counter
Model-Specific Registers
Physical Address Extensions
Machine Check Architecture
CMPXCHG8 instruction
SYSENTER/SYSEXIT
Memory Type Range Registers
Page Global Enable
Machine Check Architecture
CMOV instruction
Page Attribute Table
36-bit PSEs
CLFLUSH instruction
Debug Trace Store
ACPI via MSR
MMX support
FXSAVE and FXRESTORE instructions
SSE support
SSE2 support
CPU self snoop
Hyper-Threading
Automatic clock Control
Pending Break Enable
Extended feature flags:
cntx-id
Pentium 4 specific MSRs:
Instruction TLB: 4K, 2MB or 4MB pages, fully associative, 128 entries.
Data TLB: 4KB or 4MB pages, fully associative, 64 entries.
L1 Data cache:
Size: 8KB Sectored, 4-way associative.
line size=64 bytes.
No level 2 cache or no level 3 cache if valid 2nd level cache.
Instruction trace cache:
Size: 12K uOps 8-way associative.
L2 unified cache:
Size: 512KB Sectored, 8-way associative.
line size=64 bytes.
Number of logical processors supported within the physical package: 0
Connector type: Socket478 (PGA478 Socket)
Datasheet: http://developer.intel.com/design/pentium4/datashts/24988703.pdf
http://developer.intel.com/design/pentium4/datashts/29864304.pdf
Errata: http://developer.intel.com/design/pentium4/specupdt/24919928.pdf
MTRR registers:
MTRRcap (0xfe): MTRRphysBase0 (0x200): MTRRphysMask0 (0x201): MTRRphysBase1 (0x202): MTRRphysMask1 (0x203): MTRRphysBase2 (0x204): MTRRphysMask2 (0x205): MTRRphysBase3 (0x206): MTRRphysMask3 (0x207): MTRRphysBase4 (0x208): MTRRphysMask4 (0x209): MTRRphysBase5 (0x20a): MTRRphysMask5 (0x20b): MTRRphysBase6 (0x20c): MTRRphysMask6 (0x20d): MTRRphysBase7 (0x20e): MTRRphysMask7 (0x20f): MTRRfix64K_00000 (0x250): MTRRfix16K_80000 (0x258): MTRRfix16K_A0000 (0x259): MTRRfix4K_C8000 (0x269): MTRRfix4K_D0000 0x26a: MTRRfix4K_D8000 0x26b: MTRRfix4K_E0000 0x26c: MTRRfix4K_E8000 0x26d: MTRRfix4K_F0000 0x26e: MTRRfix4K_F8000 0x26f: MTRRdefType (0x2ff):
2.6Ghz processor (estimate).
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
[-- Attachment #2: Type: text/plain, Size: 147 bytes --]
_______________________________________________
Cpufreq mailing list
Cpufreq@lists.linux.org.uk
http://lists.linux.org.uk/mailman/listinfo/cpufreq
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Problem recognizing P4-M
2005-04-26 4:46 Problem recognizing P4-M Paul Swartz
@ 2005-04-26 8:17 ` Thomas Renninger
2005-05-04 20:58 ` Dominik Brodowski
1 sibling, 0 replies; 5+ messages in thread
From: Thomas Renninger @ 2005-04-26 8:17 UTC (permalink / raw)
To: Paul Swartz; +Cc: cpufreq
Paul Swartz wrote:
> I've checked all over the internet, but I've had no luck finding the
> answer to this problem. I have what looks to be a Mobile Intel Pentium
> 4 at 2.66Ghz. It's supported (sort of) by the p4-clockmod and
> acpi-cpufreq modules, but it seems like it should be supported by one of
> the speedstep modules. However, whenever I try to insert the
> speedstep-ich module, I get this:
>
> FATAL: Error inserting speedstep_ich
> (/lib/modules/2.6.10-5-686/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-ich.ko): No such device
>
> I get the same error under 2.6.10 (Ubuntu) and 2.6.11 (from the tree).
> Attached are the output from 'cat /proc/cpuinfo' and 'x86info -a'.
>
If acpi-cpufreq loads and works for you, everything is fine.
This is the module/driver supporting speedstep on your machine.
You should not take p4-clockmod Modul if acpi-cpufreq is working, it's not
speedstep and not that efficient.
Thomas
> Thanks in advance for any advice you might have,
> -p
>
>
> ------------------------------------------------------------------------
>
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Mobile Intel(R) Pentium(R) 4 CPU 2.66GHz
> stepping : 9
> cpu MHz : 2658.563
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
> bogomips : 5242.88
>
>
>
> ------------------------------------------------------------------------
>
> x86info v1.12b. Dave Jones 2001-2003
> Feedback to <davej@redhat.com>.
>
> Found 1 CPU
> --------------------------------------------------------------------------
> eax in: 0x00000000, eax = 00000002 ebx = 756e6547 ecx = 6c65746e edx = 49656e69
> eax in: 0x00000001, eax = 00000f29 ebx = 00010808 ecx = 00004400 edx = bfebf9ff
> eax in: 0x00000002, eax = 665b5101 ebx = 00000000 ecx = 00000000 edx = 007b7040
>
> eax in: 0x80000000, eax = 80000004 ebx = 00000000 ecx = 00000000 edx = 00000000
> eax in: 0x80000001, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
> eax in: 0x80000002, eax = 4d202020 ebx = 6c69626f ecx = 6e492065 edx = 286c6574
> eax in: 0x80000003, eax = 50202952 ebx = 69746e65 ecx = 52286d75 edx = 20342029
> eax in: 0x80000004, eax = 20202020 ebx = 20555043 ecx = 36362e32 edx = 007a4847
>
> Family: 15 Model: 2 Stepping: 9 Type: 0 Brand: 8
> CPU Model: Pentium 4 (Northwood) [D1] Original OEM
> Processor name string: Mobile Intel(R) Pentium(R) 4 CPU 2.66GHz
>
> Feature flags:
> Onboard FPU
> Virtual Mode Extensions
> Debugging Extensions
> Page Size Extensions
> Time Stamp Counter
> Model-Specific Registers
> Physical Address Extensions
> Machine Check Architecture
> CMPXCHG8 instruction
> SYSENTER/SYSEXIT
> Memory Type Range Registers
> Page Global Enable
> Machine Check Architecture
> CMOV instruction
> Page Attribute Table
> 36-bit PSEs
> CLFLUSH instruction
> Debug Trace Store
> ACPI via MSR
> MMX support
> FXSAVE and FXRESTORE instructions
> SSE support
> SSE2 support
> CPU self snoop
> Hyper-Threading
> Automatic clock Control
> Pending Break Enable
>
> Extended feature flags:
> cntx-id
> Pentium 4 specific MSRs:
>
> Instruction TLB: 4K, 2MB or 4MB pages, fully associative, 128 entries.
> Data TLB: 4KB or 4MB pages, fully associative, 64 entries.
> L1 Data cache:
> Size: 8KB Sectored, 4-way associative.
> line size=64 bytes.
> No level 2 cache or no level 3 cache if valid 2nd level cache.
> Instruction trace cache:
> Size: 12K uOps 8-way associative.
> L2 unified cache:
> Size: 512KB Sectored, 8-way associative.
> line size=64 bytes.
> Number of logical processors supported within the physical package: 0
>
> Connector type: Socket478 (PGA478 Socket)
>
> Datasheet: http://developer.intel.com/design/pentium4/datashts/24988703.pdf
> http://developer.intel.com/design/pentium4/datashts/29864304.pdf
> Errata: http://developer.intel.com/design/pentium4/specupdt/24919928.pdf
>
> MTRR registers:
> MTRRcap (0xfe): MTRRphysBase0 (0x200): MTRRphysMask0 (0x201): MTRRphysBase1 (0x202): MTRRphysMask1 (0x203): MTRRphysBase2 (0x204): MTRRphysMask2 (0x205): MTRRphysBase3 (0x206): MTRRphysMask3 (0x207): MTRRphysBase4 (0x208): MTRRphysMask4 (0x209): MTRRphysBase5 (0x20a): MTRRphysMask5 (0x20b): MTRRphysBase6 (0x20c): MTRRphysMask6 (0x20d): MTRRphysBase7 (0x20e): MTRRphysMask7 (0x20f): MTRRfix64K_00000 (0x250): MTRRfix16K_80000 (0x258): MTRRfix16K_A0000 (0x259): MTRRfix4K_C8000 (0x269): MTRRfix4K_D0000 0x26a: MTRRfix4K_D8000 0x26b: MTRRfix4K_E0000 0x26c: MTRRfix4K_E8000 0x26d: MTRRfix4K_F0000 0x26e: MTRRfix4K_F8000 0x26f: MTRRdefType (0x2ff):
>
> 2.6Ghz processor (estimate).
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Problem recognizing P4-M
2005-04-26 4:46 Problem recognizing P4-M Paul Swartz
2005-04-26 8:17 ` Thomas Renninger
@ 2005-05-04 20:58 ` Dominik Brodowski
2005-05-05 3:56 ` Paul Swartz
1 sibling, 1 reply; 5+ messages in thread
From: Dominik Brodowski @ 2005-05-04 20:58 UTC (permalink / raw)
To: Paul Swartz; +Cc: cpufreq
Hi,
On Tue, Apr 26, 2005 at 12:46:58AM -0400, Paul Swartz wrote:
> I've checked all over the internet, but I've had no luck finding the
> answer to this problem. I have what looks to be a Mobile Intel Pentium
> 4 at 2.66Ghz. It's supported (sort of) by the p4-clockmod and
> acpi-cpufreq modules, but it seems like it should be supported by one of
> the speedstep modules. However, whenever I try to insert the
> speedstep-ich module, I get this:
speedstep-ich is the only candidate for this CPU. However, it depends on an
Intel chipset being present in your notebook. What does lspci tell you?
Dominik
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Problem recognizing P4-M
2005-05-04 20:58 ` Dominik Brodowski
@ 2005-05-05 3:56 ` Paul Swartz
2005-05-05 6:34 ` Dominik Brodowski
0 siblings, 1 reply; 5+ messages in thread
From: Paul Swartz @ 2005-05-05 3:56 UTC (permalink / raw)
To: Dominik Brodowski; +Cc: cpufreq
[-- Attachment #1.1: Type: text/plain, Size: 1767 bytes --]
On Wed, 2005-05-04 at 22:58 +0200, Dominik Brodowski wrote:
> speedstep-ich is the only candidate for this CPU. However, it depends on an
> Intel chipset being present in your notebook. What does lspci tell you?
lspci says:
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device cbb2 (rev
02)
0000:00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M]
0000:00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI
AC-Link Controller Audio Device (rev 02)
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge
[Aladdin IV]
0000:00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
0000:00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller (rev 02)
0000:00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
Controller (rev 02)
0000:00:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 50)
0000:00:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 50)
0000:00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
0000:00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21
IEEE-1394a-2000 Controller (PHY/Link)
0000:00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
0000:00:11.0 Bridge: ALi Corporation M7101 Power Management Controller
[PMU]
0000:00:12.0 Ethernet controller: National Semiconductor Corporation
DP83815 (MacPhyter) Ethernet Controller
0000:01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP
340M
thanks,
-p
(p.s. if you could keep at least CCing me, I'd appreciate it)
--
Paul Swartz
(o_ http://z3p.livejournal.com/ _o)
//\ z3p@twistedmatrix.com /\\
V_/_ AIM: z3penguin _\_V->
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
[-- Attachment #2: Type: text/plain, Size: 147 bytes --]
_______________________________________________
Cpufreq mailing list
Cpufreq@lists.linux.org.uk
http://lists.linux.org.uk/mailman/listinfo/cpufreq
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Problem recognizing P4-M
2005-05-05 3:56 ` Paul Swartz
@ 2005-05-05 6:34 ` Dominik Brodowski
0 siblings, 0 replies; 5+ messages in thread
From: Dominik Brodowski @ 2005-05-05 6:34 UTC (permalink / raw)
To: Paul Swartz; +Cc: cpufreq
On Wed, May 04, 2005 at 11:56:24PM -0400, Paul Swartz wrote:
> On Wed, 2005-05-04 at 22:58 +0200, Dominik Brodowski wrote:
> > speedstep-ich is the only candidate for this CPU. However, it depends on an
> > Intel chipset being present in your notebook. What does lspci tell you?
>
> lspci says:
>
> 0000:00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
This one isn't supported by speedstep-ich, as it isn't an ICH-based
southbridge.
Dominik
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2005-05-05 6:34 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-26 4:46 Problem recognizing P4-M Paul Swartz
2005-04-26 8:17 ` Thomas Renninger
2005-05-04 20:58 ` Dominik Brodowski
2005-05-05 3:56 ` Paul Swartz
2005-05-05 6:34 ` Dominik Brodowski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.