* [U-Boot-Users] Re: Download U-Boot in RAM on Memec Board
[not found] <20050426221217.98E031224C@sc8-sf-spam2.sourceforge.net>
@ 2005-04-27 15:01 ` Pierre Kestener
0 siblings, 0 replies; only message in thread
From: Pierre Kestener @ 2005-04-27 15:01 UTC (permalink / raw)
To: u-boot
>Subject: [U-Boot-Users] Download U-Boot in RAM on Memec Board
>
>Hei at all
>
>I have comiled u-boot and want to download the u-boot in RAM on Memec Evaluation Board.
>The board has 64K RAM and address is 0x00000000 to 0x03FFFFFF.
>
>When i use the commands described in examples e.g.
>xmd> ppcconnect
>xmd> dow uboot.elf
>xmd> run
>the xmd begins to download at address 0x04000000 !!! and at the console I get information
>on which addresses the sectors were placed.
>
>
>
You have to change TEXT_BASE (see "board/xilinx/ml300/config.mk" file,
default is 0x04000000) to some address inside RAM (for example 0x100000)
and change accordingly CFG_MONITOR_BASE in file
"include/configs/ml300.h" (see README at top of u-boot sources).
It should be sufficient to run u-boot this way on a Memec board via xmd.
Pierre Kestener.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-04-27 15:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20050426221217.98E031224C@sc8-sf-spam2.sourceforge.net>
2005-04-27 15:01 ` [U-Boot-Users] Re: Download U-Boot in RAM on Memec Board Pierre Kestener
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.