All of lore.kernel.org
 help / color / mirror / Atom feed
* [linux-lvm] help
@ 2005-05-05 12:26 Colm G. Connolly
  2005-05-05 12:33 ` Martin Eisenhardt
  2005-05-05 13:16 ` Diaz Rodriguez, Eduardo
  0 siblings, 2 replies; 11+ messages in thread
From: Colm G. Connolly @ 2005-05-05 12:26 UTC (permalink / raw)
  To: linux-lvm

Hi all,

I've just got a new 250G hard drive and have been trying to add it to an 
  exitiing lvm2 setup on my system. However, I've screwed something up 
and now I can't mount the volume which is /dev/HOME_VG/HOME_LV and 
contains an XFS file system.

My question is this: how I can I restore the original configuration so 
that I can see the contents of the logical volume?

I've included a transcript of the commands I've run to make this mess.

I'm running

# lvm version
   LVM version:     2.01.04 (2005-02-09)
   Library version: 1.01.00-ioctl (2005-01-17)
   Driver version:  4.4.0

on Linux 2.6.11.7 SMP i686 on a Debian/testing system

The transcript of commands I've run is as follows

   461  pvcreate /dev/hdd
   462  pvscan
   463  mount
   464  vgextend HOME_VG /dev/hdd
   465  pvscan
   466  man xfs_growfs
   467  df -h
   468  xfs_growfs /home

468 didn't work since I hadn't extended the  logical volume.

   469  df -h
   470  pvscan
   471  man pvscan
   472  pvscan -v
   473  pvscan -vv
   474  lvscan
   475  man lvextend
   476  man lvextend
   477  mount
   478  lvextend /dev/HOME_VG/HOME_LV /dev/hdd
   479  lvextend /dev/HOME_VG/HOME_LV
   480  lvextend -L250G /dev/HOME_VG/HOME_LV
   481  lvscan
   482  mount
   483  df -h

At this point I got a bit concerned that I had added 250G to the logical 
volume but pvdisplay only reported a capicity of 232.88G even though hdd 
is a 250G hard drive. So I started to try to remove the

   484  lvreduce -L250G /dev/HOME_VG/HOME_LV
   485  lvreduce -L-250G /dev/HOME_VG/HOME_LV

None of these reduction attempts worked. lvreduce complained that it was 
unable to reduce below 1 extent.

   486  pvdisplay
   487  lvdisplay
   488  lvscan
   489  vgreduce /dev/HOME_VG/HOME_LV /dev/hdd
   490  vgreduce /dev/HOME_VG /dev/hdd
   491  ls /var/lock/lvm/
   492  lvscan
   493  lvdisplay
   494  lvresize
   495  lvresize -L-250G /dev/HOME_VG/HOME_LV
   496  lvreduce -L-250G /dev/HOME_VG/HOME_LV

Neither of these commands worked either.

   497  man lvmchange
   498  man lvs
   499  lvs
   500  pvs
   501  lvmdiskscan
   502  lvmreduce -L -250G /dev/HOME_VG/HOME_LV
   503  /sbin/lvmreduce -L -250G /dev/HOME_VG/HOME_LV
   504  which lvmreduce
   505  which lvm
   506  ls /sbin/lvm*
   507  ls -l /sbin/lvm*
   508  lvreduce -L -250G /dev/HOME_VG/HOME_LV
   509  lvscan
   510  lvmdiskscan
   511  pvdisplay
   512  pvdisplay /dev/hdd
   513  man pvmove
   514  pvmove -v /dev/hdd
   515  man lvchange
   516  lvscan
   517  lvscan -vv
   518  lvreduce -L-250G /dev/HOME_VG/HOME_LV
   519  mount -oro /home
   520  mount
   521  df -h
   522  umount /home
   523  lvscan
   524  lvdisplay
   525  pvdisplay

Up to this point I could mount /dev/HOME_VG/HOME_LV on /home no problem

   526  lvreduce -L -232.88G /dev/HOME_VG/HOME_LV

This command worked and the volume group was reduced. But from now this 
point on I can no longer mount the volume group

   527  lvscan
   528  lvdisplay
   529  mount -oro /home
   530  lvscan
   531  lvmdiskscan
   532  pvscan
   533  man xfs_repair
   534  man xfs_check
   535  xfs_check /dev/HOME_VG/HOME_LV

can't seek in filesystem at bb 36633600
can't read superblock for ag 30
can't seek in filesystem at bb 37854720
can't read superblock for ag 31

   536  h|grep mount
   537  mount -oro /home

This command reports
mount: /dev/mapper/HOME_VG-HOME_LV: can't read superblock

   538  man vgcfgrestore
   539  cd /etc/lvm/
   540  sl
   541  cd backup/
   542  ls
   543  less HOME_VG
   544  less HOME_VG
   545  man vgcfgrestore
   546  vgcfgrestore -v HOME_VG
   547  mount -o ro /home/

This command reports
mount: /dev/mapper/HOME_VG-HOME_LV: can't read superblock

At this point I've stopped. I can't figure out how to undo the damage 
I've done. And I really need to recover the original setup. There is 
stuff on the logical volume for which I have no backup. How I wish I'd 
taken my own advice and backed the important stuff up.

Right now pvscan reports
   PV /dev/hdc1   VG HOME_VG   lvm2 [9.32 GB / 0    free]
   PV /dev/hda5   VG HOME_VG   lvm2 [8.82 GB / 1.01 GB free]
   PV /dev/hdd    VG HOME_VG   lvm2 [232.88 GB / 232.88 GB free]
   Total: 3 [251.02 GB] / in use: 3 [251.02 GB] / in no VG: 0 [0   ]

and

# lvmdiskscan
   /dev/hda1 [       47.03 MB]
   /dev/hdc1 [        9.32 GB] LVM physical volume
   /dev/hda2 [        8.79 GB]
   /dev/hda3 [     1019.75 MB]
   /dev/hda5 [        8.82 GB] LVM physical volume
   /dev/hdd  [      232.89 GB] LVM physical volume
   /dev/hdb1 [        6.01 GB]
   0 disks
   4 partitions
   1 LVM physical volume whole disk
   2 LVM physical volumes
root@darwin:/etc/lvm/backup# lvs
lvs     lvscan
root@darwin:/etc/lvm/backup# lvscan
   ACTIVE            '/dev/HOME_VG/HOME_LV' [17.12 GB] inherit

root@darwin:/etc/lvm/backup# pvdisplay
   --- Physical volume ---
   PV Name               /dev/hdc1
   VG Name               HOME_VG
   PV Size               9.32 GB / not usable 0
   Allocatable           yes (but full)
   PE Size (KByte)       4096
   Total PE              2385
   Free PE               0
   Allocated PE          2385
   PV UUID               XzBfoB-cV7O-hIzQ-3Tjn-jam0-IBXw-MJKV5W

   --- Physical volume ---
   PV Name               /dev/hda5
   VG Name               HOME_VG
   PV Size               8.82 GB / not usable 0
   Allocatable           yes
   PE Size (KByte)       4096
   Total PE              2257
   Free PE               259
   Allocated PE          1998
   PV UUID               NIO6ey-B8gt-APxD-BEOP-cmpd-UCBf-KY2rLB

   --- Physical volume ---
   PV Name               /dev/hdd
   VG Name               HOME_VG
   PV Size               232.88 GB / not usable 0
   Allocatable           yes
   PE Size (KByte)       4096
   Total PE              59618
   Free PE               59618
   Allocated PE          0
   PV UUID               2hYdvL-9I7I-tz01-Rhza-ZLyp-tsTp-niP5pJ

Any help most gratefully appreciated.

Thanks in advance,

-- 
Colm G. Connolly,		Tel: +353-1-716-2855
Dept. of Computer Science,	Fax: +353-1-269-7262
University College Dublin,	MSN: colmconn@hotmail.com
Belfield, Dublin 4, �ire.	Web: http://inismor.ucd.ie/~colmconn/

^ permalink raw reply	[flat|nested] 11+ messages in thread
* [linux-lvm] help
@ 2001-07-26 15:42 Pierre Lamb
  0 siblings, 0 replies; 11+ messages in thread
From: Pierre Lamb @ 2001-07-26 15:42 UTC (permalink / raw)
  To: linux-lvm

I placed the 2 required commands in rc.sysinit (rh71)
before hte section "Mounting other file"
gave vgscan the -d option and left vgchange -ay.
During the boot process I see where vscan uodated
lvmtab and lvmtab.d and it say successfull but when I
look into lvmd.d it is empty. after I log in then do
the vgscan the correct entries are made. Ant help
would be appreciated.

Pierre



__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/

^ permalink raw reply	[flat|nested] 11+ messages in thread
* [linux-lvm] Help.
@ 2001-07-22  4:36 Ben Konosky
  2001-07-22  4:40 ` Steven Lembark
  2001-07-23  7:52 ` Heinz J. Mauelshagen
  0 siblings, 2 replies; 11+ messages in thread
From: Ben Konosky @ 2001-07-22  4:36 UTC (permalink / raw)
  To: linux-lvm

I had a VG that had three PVs in it, one of the PVs failed, is there any 
way to trick the VG into thinking it only has two PVs in it so I can 
*try* to mount it and see what data I can pull off the remainder. The 
file system is reiserfs, and it was the third PV in the group that died.

Thanks in advance,
Ben Konosky
bkonosky@texas.net

^ permalink raw reply	[flat|nested] 11+ messages in thread
end of thread, other threads:[~2005-05-07 14:18 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-05-05 12:26 [linux-lvm] help Colm G. Connolly
2005-05-05 12:33 ` Martin Eisenhardt
2005-05-05 13:16 ` Diaz Rodriguez, Eduardo
2005-05-05 15:05   ` David Mohr
2005-05-07 14:18     ` Colm G. Connolly
  -- strict thread matches above, loose matches on Subject: below --
2001-07-26 15:42 Pierre Lamb
2001-07-22  4:36 [linux-lvm] Help Ben Konosky
2001-07-22  4:40 ` Steven Lembark
2001-07-22  5:00   ` Ben Konosky
2001-07-23  7:52 ` Heinz J. Mauelshagen
2001-07-24  2:02   ` Ben Konosky

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.