* [Bluez-users] Old known, Apple BT Keyboard
@ 2005-05-15 21:20 Jesús Cano Navarro
2005-05-15 21:34 ` Marco Trudel
0 siblings, 1 reply; 10+ messages in thread
From: Jesús Cano Navarro @ 2005-05-15 21:20 UTC (permalink / raw)
To: bluez-users
Hi everybody,
Thank you for reading this message and spending your time helping me
an the others.
I tried to make the Apple BT Keyboard work with my GNU/Linux and
Marcel's help (thank you Marcel) but i did not have the tool "hcidump"
to debug the inquiries and conexions and i was too lost in this field.
Now i think (hope) i have it all and my goals are:
-Make sure i have the right configuration needs for BT use.
-Permanently replace the pc105 keyboard.
-Configure correctly the Apple BT Keyboard.
Would you please help/guide me to get it?, i would really appreciate it!.
I read several people have got it with the Apple keyboard.Somebody
told about writting a HOWTO, as it's becomeing an usual stuff
(GNU/Linux-Bluez and BT keyboards), i would be interested in help to
it.
Thank you all.
Sincerenly
Jes=FAs Cano Navarro
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Bluez-users] Old known, Apple BT Keyboard
2005-05-15 21:20 [Bluez-users] Old known, Apple BT Keyboard Jesús Cano Navarro
@ 2005-05-15 21:34 ` Marco Trudel
2005-05-16 4:46 ` Andre Baron
0 siblings, 1 reply; 10+ messages in thread
From: Marco Trudel @ 2005-05-15 21:34 UTC (permalink / raw)
To: bluez-users
If you don't ask specific questions, we can't help you... So what's the
current problem?
It sounds like the last step was that marcel requested a hcidump of your
failing action... So, I suggest to do so...
regards
Marco
Jesús Cano Navarro wrote:
> Hi everybody,
>
> Thank you for reading this message and spending your time helping me
> an the others.
>
> I tried to make the Apple BT Keyboard work with my GNU/Linux and
> Marcel's help (thank you Marcel) but i did not have the tool "hcidump"
> to debug the inquiries and conexions and i was too lost in this field.
> Now i think (hope) i have it all and my goals are:
>
> -Make sure i have the right configuration needs for BT use.
> -Permanently replace the pc105 keyboard.
> -Configure correctly the Apple BT Keyboard.
>
> Would you please help/guide me to get it?, i would really appreciate it!.
>
> I read several people have got it with the Apple keyboard.Somebody
> told about writting a HOWTO, as it's becomeing an usual stuff
> (GNU/Linux-Bluez and BT keyboards), i would be interested in help to
> it.
>
> Thank you all.
>
> Sincerenly
> Jesús Cano Navarro
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by Oracle Space Sweepstakes
> Want to be the first software developer in space?
> Enter now for the Oracle Space Sweepstakes!
> http://ads.osdn.com/?ad_ids93&alloc_id\x16281&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
>
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Bluez-users] Old known, Apple BT Keyboard
2005-05-15 21:34 ` Marco Trudel
@ 2005-05-16 4:46 ` Andre Baron
2005-05-16 20:49 ` Jesús Cano Navarro
0 siblings, 1 reply; 10+ messages in thread
From: Andre Baron @ 2005-05-16 4:46 UTC (permalink / raw)
To: bluez-users
I echo Marco, however with one caveat; I don't believe you can replace
the pc105 keyboard, you still need it to reattach to your bluetooth
keyboard. I use an Apple BT keyboard but I still have to reattach every
time I come home since they keyboard will have gone to sleep.
Anyways, ask your questions and I'll help where I can. (Marcel was very
helpfull to me as well.)
Andre
Marco Trudel wrote:
> If you don't ask specific questions, we can't help you... So what's
> the current problem?
> It sounds like the last step was that marcel requested a hcidump of
> your failing action... So, I suggest to do so...
>
> regards
> Marco
>
>
> Jesús Cano Navarro wrote:
>
>> Hi everybody,
>>
>> Thank you for reading this message and spending your time helping me
>> an the others.
>>
>> I tried to make the Apple BT Keyboard work with my GNU/Linux and
>> Marcel's help (thank you Marcel) but i did not have the tool "hcidump"
>> to debug the inquiries and conexions and i was too lost in this field.
>> Now i think (hope) i have it all and my goals are:
>>
>> -Make sure i have the right configuration needs for BT use.
>> -Permanently replace the pc105 keyboard.
>> -Configure correctly the Apple BT Keyboard.
>>
>> Would you please help/guide me to get it?, i would really appreciate
>> it!.
>>
>> I read several people have got it with the Apple keyboard.Somebody
>> told about writting a HOWTO, as it's becomeing an usual stuff
>> (GNU/Linux-Bluez and BT keyboards), i would be interested in help to
>> it.
>>
>> Thank you all.
>>
>> Sincerenly
>> Jesús Cano Navarro
>>
>>
>> -------------------------------------------------------
>> This SF.Net email is sponsored by Oracle Space Sweepstakes
>> Want to be the first software developer in space?
>> Enter now for the Oracle Space Sweepstakes!
>> http://ads.osdn.com/?ad_ids93&alloc_id\x16281&op=click
>> _______________________________________________
>> Bluez-users mailing list
>> Bluez-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>>
>>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by Oracle Space Sweepstakes
> Want to be the first software developer in space?
> Enter now for the Oracle Space Sweepstakes!
> http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Bluez-users] Old known, Apple BT Keyboard
2005-05-16 4:46 ` Andre Baron
@ 2005-05-16 20:49 ` Jesús Cano Navarro
2005-05-20 17:46 ` Jesús Cano Navarro
0 siblings, 1 reply; 10+ messages in thread
From: Jesús Cano Navarro @ 2005-05-16 20:49 UTC (permalink / raw)
To: bluez-users
[-- Attachment #1: Type: text/plain, Size: 2057 bytes --]
Hi,
Thank you for your interest!.
My first pair of questions is:
-I don't know the whole set of tools that bluez-utils brings but i
found at least two for connexions: the hidd daemon and hcitool, both
have connexion parameters but:
1)¿which is the purpose of them?, ¿for what is every one? i couldn't
dintinguish which one should i use to connect to a device.
2)How do i debug the activity with hcidump?, run hcidump alone in a
console and work in another?, what parameters should i use?, -X -V -w
<file>?
I'm on a Debian GNU/Linux testing, Kernel 2.6.8-2-686. Compaq Deskpro
EN: Pentium 2 (Deschutes) 350, 256MB.
Thank you
2005/5/16, Andre Baron <andre@metalan.net>:
> I echo Marco, however with one caveat; I don't believe you can replace
[...]
> Marco Trudel wrote:
>
> > If you don't ask specific questions, we can't help you... So what's
> > the current problem?
> > It sounds like the last step was that marcel requested a hcidump of
> > your failing action... So, I suggest to do so...
> >
> > regards
> > Marco
> >
> >
> > Jesús Cano Navarro wrote:
> >
> >> Hi everybody,
> >>
> >> Thank you for reading this message and spending your time helping me
> >> an the others.
> >>
> >> I tried to make the Apple BT Keyboard work with my GNU/Linux and
> >> Marcel's help (thank you Marcel) but i did not have the tool "hcidump"
> >> to debug the inquiries and conexions and i was too lost in this field.
> >> Now i think (hope) i have it all and my goals are:
> >>
> >> -Make sure i have the right configuration needs for BT use.
> >> -Permanently replace the pc105 keyboard.
> >> -Configure correctly the Apple BT Keyboard.
> >>
> >> Would you please help/guide me to get it?, i would really appreciate
> >> it!.
> >>
> >> I read several people have got it with the Apple keyboard.Somebody
> >> told about writting a HOWTO, as it's becomeing an usual stuff
> >> (GNU/Linux-Bluez and BT keyboards), i would be interested in help to
> >> it.
> >>
> >> Thank you all.
Jesús Cano Navarro
[-- Attachment #2: hcid.conf --]
[-- Type: application/octet-stream, Size: 1399 bytes --]
#
# HCI daemon configuration file.
#
# $Id: hcid.conf,v 1.7 2004/12/13 14:16:03 holtmann Exp $
#
# HCId options
options {
# Automatically initialize new devices
autoinit yes;
# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security auto;
# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi;
# PIN helper
pin_helper /usr/bin/bluez-pin;
# D-Bus PIN helper
#dbus_pin_helper;
}
# Default settings for HCI devices
device {
# Local device name
# %d - device id
# %h - host name
name "%h-%d";
# Local device class
class 0x3e0100;
# Default packet type
#pkt_type DH1,DM1,HV1;
# Inquiry and Page scan
iscan enable; pscan enable;
# Default link mode
# none - no specific policy
# accept - always accept incoming connections
# master - become master on incoming connections,
# deny role switch on outgoing connections
lm accept;
# Default link policy
# none - no specific policy
# rswitch - allow role switch
# hold - allow hold mode
# sniff - allow sniff mode
# park - allow park mode
lp rswitch,hold,sniff,park;
# Authentication and Encryption (Security Mode 3)
#auth enable;
#encrypt enable;
}
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [Bluez-users] Old known, Apple BT Keyboard
2005-05-16 20:49 ` Jesús Cano Navarro
@ 2005-05-20 17:46 ` Jesús Cano Navarro
2005-05-20 20:10 ` [Bluez-users] Re: btsco - headset profile activated but no sco packets transmitted ??? Jan H
0 siblings, 1 reply; 10+ messages in thread
From: Jesús Cano Navarro @ 2005-05-20 17:46 UTC (permalink / raw)
To: bluez-users
[-- Attachment #1: Type: text/plain, Size: 3540 bytes --]
Hi,
I've been experimenting with the hcidump and hcitool, the 3Com usb-BT
dongle and the Apple BT Keyboard. I couldn't connect to the Keyboard.
In one of the sessions i was in X in the hcidump to a xterm, a windows
asking for a PIN poped up several times, at the same time i pushed
space or intro in tha Apple Keyboard to keep it awaken; i put a "1234"
and a "0000" from the pc105 keyboard in it but nothing happened. I
supose this was the pin-helper i had never seen before. In a later X
session with the hcidump to the file i'm sending here (inside the
.tar), i tried the same hcitool commands but i didn't see the PIN
window.
In all the times i tried to make the BT keyboard work, the "hcitool
cc" said "Can't create connection: I/O input error" or like that. When
i had the window with the PIN i could see a "PIN Request" at the dump,
but none of the PIN inputs i tried seemed to work, nor i could
anything at the dump with a "PIN succes" or "PIN request completed" or
something.
Don't know what to do... What should i do to connecto to the
keyboard?. Why i cann't make it to recive the PIN?, Which is the PIN
for the keyboard?, Whose is the /etc/bluetooth/pin?, How do BT devices
"start talking"?.
I'll keep on trying.
Thank you very much.
Jesús
2005/5/16, Jesús Cano Navarro <jesuscanonavarro@gmail.com>:
> Hi,
>
> Thank you for your interest!.
>
> My first pair of questions is:
> -I don't know the whole set of tools that bluez-utils brings but i
> found at least two for connexions: the hidd daemon and hcitool, both
> have connexion parameters but:
> 1)¿which is the purpose of them?, ¿for what is every one? i couldn't
> dintinguish which one should i use to connect to a device.
> 2)How do i debug the activity with hcidump?, run hcidump alone in a
> console and work in another?, what parameters should i use?, -X -V -w
> <file>?
>
> I'm on a Debian GNU/Linux testing, Kernel 2.6.8-2-686. Compaq Deskpro
> EN: Pentium 2 (Deschutes) 350, 256MB.
>
> Thank you
>
> 2005/5/16, Andre Baron <andre@metalan.net>:
> > I echo Marco, however with one caveat; I don't believe you can replace
> [...]
>
> > Marco Trudel wrote:
> >
> > > If you don't ask specific questions, we can't help you... So what's
> > > the current problem?
> > > It sounds like the last step was that marcel requested a hcidump of
> > > your failing action... So, I suggest to do so...
> > >
> > > regards
> > > Marco
> > >
> > >
> > > Jesús Cano Navarro wrote:
> > >
> > >> Hi everybody,
> > >>
> > >> Thank you for reading this message and spending your time helping me
> > >> an the others.
> > >>
> > >> I tried to make the Apple BT Keyboard work with my GNU/Linux and
> > >> Marcel's help (thank you Marcel) but i did not have the tool "hcidump"
> > >> to debug the inquiries and conexions and i was too lost in this field.
> > >> Now i think (hope) i have it all and my goals are:
> > >>
> > >> -Make sure i have the right configuration needs for BT use.
> > >> -Permanently replace the pc105 keyboard.
> > >> -Configure correctly the Apple BT Keyboard.
> > >>
> > >> Would you please help/guide me to get it?, i would really appreciate
> > >> it!.
> > >>
> > >> I read several people have got it with the Apple keyboard.Somebody
> > >> told about writting a HOWTO, as it's becomeing an usual stuff
> > >> (GNU/Linux-Bluez and BT keyboards), i would be interested in help to
> > >> it.
> > >>
> > >> Thank you all.
>
> Jesús Cano Navarro
>
>
>
[-- Attachment #2: attachment.tar --]
[-- Type: application/x-tar, Size: 10240 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Bluez-users] Re: btsco - headset profile activated but no sco packets transmitted ???
2005-05-20 17:46 ` Jesús Cano Navarro
@ 2005-05-20 20:10 ` Jan H
2005-05-20 20:18 ` Brad Midgley
0 siblings, 1 reply; 10+ messages in thread
From: Jan H @ 2005-05-20 20:10 UTC (permalink / raw)
To: bluez-users
Lars Steinke wrote:
> Phew, got it finally,
>
> it was the bloody ehci_hcd audio problem others have come across:
> http://sourceforge.net/mailarchive/message.php?msg_id=11431438
>
> Using ohci_hcd, btsco works a treat in recording and playing, thanks for
> the good work !!!
>
>
Hi List, Hi Lars,
it seems to me I have the same problems at least the same symptoms as
you. I am trying to get a logitech mobil pro (HS01 V16) headset to work
with avm bluefritz usb dongle on my acer notebook. There ist some noise
but no sound.
Peering works fine and all modules seem to work too
user@name:/$ lsmod | grep sco
snd_bt_sco 14496 1
snd_hwdep 9632 2 snd_bt_sco
sco 15812 0
bluetooth 53252 8 sco,hci_usb,rfcomm,l2cap
snd_pcm 96456 4
snd_bt_sco,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd 55332 11
snd_bt_sco,snd_hwdep,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
snd_page_alloc 10116 3 snd_bt_sco,snd_intel8x0,snd_pcm
After that i did esctl stop and startet btsco. while playing a test wav
i get
btsco v0.4
Device is 1:0
Voice setting: 0x0060
RFCOMM channel 1 connected
speaker volume: 11 mic volume: 0
driver is in use
connected SCO channel
Done setting sco fd
recieved AT+VGS=11
Sending up speaker change 11
speaker volume: 11 mic volume: 1
driver is not in use
disconnected SCO channel
name:/# aplay -B 1000000 -D plughw:Headset /home/user/Desktop/test.wav
Playing WAVE '/home/user/Desktop/test.wav' : Signed 16 bit Little
Endian, Rate 8000 Hz, Mono
aplay: pcm_write:1146: write error: Input/output error
Now i can set volume by pushing the headset buttons but there is no
sound just some noisy with max Volume settings.
My question is who did you find out ehci_hcd driver is used?
And how did you load ohci_hcd?
lspci shows me
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB
2.0 EHCI Controller (rev 03)
This is really driving me crazy, thanks for help
Jan
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Bluez-users] btsco - headset profile activated but no sco packets transmitted ???
@ 2005-04-04 19:45 Lars Steinke
2005-04-04 19:50 ` [Bluez-users] " Lars Steinke
0 siblings, 1 reply; 10+ messages in thread
From: Lars Steinke @ 2005-04-04 19:45 UTC (permalink / raw)
To: bluez-users
Hi there,
while running btsco I can successfully change my mixersettings via
the headset, so I assume the connection has been established just fine:
root@sigma:~/src/btsco# ./btsco -v 00:07:A4:95:41:76 2
btsco v0.4
Device is 1:0
Voice setting: 0x0060
RFCOMM channel 2 connected
recieved AT+BRSF=24
recieved AT+VGS=03
Sending up speaker change 3
recieved AT+VGS=07
Sending up speaker change 7
recieved AT+VGS=11
Sending up speaker change 11
recieved AT+VGS=15
Sending up speaker change 15
speaker volume: 15 mic volume: 1
driver is in use
connected SCO channel
Done setting sco fd
But I can neither hear sound nor record anything via the Jabra BT110
headset using BlueZ 20050328 with kernel 2.6.11:
aplay -D plughw:Headset test.wav
Playing Sparc Audio 'test.wav' : Mu-Law, Rate 8000 Hz, Mono
I just hear a raise in static when playback commences (even though mixer
levels are maxed in alsamixer!)...
snd-bt-sco revision 1.6 $
snd-bt-sco: snd-bt-scod thread starting
snd-bt-sco: playback_open
snd-bt-sco: prepare ok bps: 16000 size: 8000 count: 2000
snd-bt-sco: playback_trigger 1
snd-bt-sco: setting playback to bspcm
root@sigma:~# hcitool con
Connections:
< SCO 00:07:A4:95:41:76 handle 44 state 1 lm SLAVE
< ACL 00:07:A4:95:41:76 handle 41 state 1 lm MASTER
root@sigma:~# hciconfig hci0
hci0: Type: USB
BD Address: 00:02:72:80:A5:D3 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:9966 acl:207 sco:0 events:535 errors:0
TX bytes:6279 acl:191 sco:0 commands:195 errors:0
root@sigma:~# hciconfig hci0 revision
hci0: Type: USB
BD Address: 00:02:72:80:A5:D3 ACL MTU: 192:8 SCO MTU: 64:8
HCI 16.14
Chip version: BlueCore02-External
Max key size: 56 bit
SCO mapping: HCI
Audio works fine with that headset and dongle using the Widcomm stack
1.4 under Windoze ;(...
Regards,
Lars
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 10+ messages in thread* [Bluez-users] Re: btsco - headset profile activated but no sco packets transmitted ???
2005-04-04 19:45 [Bluez-users] " Lars Steinke
@ 2005-04-04 19:50 ` Lars Steinke
2005-04-15 11:12 ` Lars Steinke
0 siblings, 1 reply; 10+ messages in thread
From: Lars Steinke @ 2005-04-04 19:50 UTC (permalink / raw)
To: bluez-users
Oops, forgot that info here:
root@sigma:~# hcitool info 00:07:A4:95:41:76
Requesting information ...
BD Address: 00:07:A4:95:41:76
Device Name: Jabra BT110
LMP Version: 1.2 (0x2) LMP Subversion: 0x613
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xfc 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
<encryption> <slot offset> <timing accuracy> <role
switch>
<hold mode> <sniff mode> <park state> <RSSI> <channel
quality>
<SCO link> <HV2 packets> <HV3 packets> <u-law log>
<A-law log>
<CVSD> <paging scheme> <transparent SCO>
On Mon, Apr 04, 2005 at 09:45:42PM +0200, Lars Steinke wrote:
> Hi there,
>
> while running btsco I can successfully change my mixersettings via
> the headset, so I assume the connection has been established just fine:
>
> root@sigma:~/src/btsco# ./btsco -v 00:07:A4:95:41:76 2
> btsco v0.4
> Device is 1:0
> Voice setting: 0x0060
> RFCOMM channel 2 connected
> recieved AT+BRSF=24
> recieved AT+VGS=03
> Sending up speaker change 3
> recieved AT+VGS=07
> Sending up speaker change 7
> recieved AT+VGS=11
> Sending up speaker change 11
> recieved AT+VGS=15
> Sending up speaker change 15
> speaker volume: 15 mic volume: 1
> driver is in use
> connected SCO channel
> Done setting sco fd
>
> But I can neither hear sound nor record anything via the Jabra BT110
> headset using BlueZ 20050328 with kernel 2.6.11:
>
> aplay -D plughw:Headset test.wav
> Playing Sparc Audio 'test.wav' : Mu-Law, Rate 8000 Hz, Mono
>
> I just hear a raise in static when playback commences (even though mixer
> levels are maxed in alsamixer!)...
>
> snd-bt-sco revision 1.6 $
> snd-bt-sco: snd-bt-scod thread starting
> snd-bt-sco: playback_open
> snd-bt-sco: prepare ok bps: 16000 size: 8000 count: 2000
> snd-bt-sco: playback_trigger 1
> snd-bt-sco: setting playback to bspcm
>
> root@sigma:~# hcitool con
> Connections:
> < SCO 00:07:A4:95:41:76 handle 44 state 1 lm SLAVE
> < ACL 00:07:A4:95:41:76 handle 41 state 1 lm MASTER
> root@sigma:~# hciconfig hci0
> hci0: Type: USB
> BD Address: 00:02:72:80:A5:D3 ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:9966 acl:207 sco:0 events:535 errors:0
> TX bytes:6279 acl:191 sco:0 commands:195 errors:0
>
> root@sigma:~# hciconfig hci0 revision
> hci0: Type: USB
> BD Address: 00:02:72:80:A5:D3 ACL MTU: 192:8 SCO MTU: 64:8
> HCI 16.14
> Chip version: BlueCore02-External
> Max key size: 56 bit
> SCO mapping: HCI
>
> Audio works fine with that headset and dongle using the Widcomm stack
> 1.4 under Windoze ;(...
>
> Regards,
> Lars
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 10+ messages in thread* [Bluez-users] Re: btsco - headset profile activated but no sco packets transmitted ???
2005-04-04 19:50 ` [Bluez-users] " Lars Steinke
@ 2005-04-15 11:12 ` Lars Steinke
0 siblings, 0 replies; 10+ messages in thread
From: Lars Steinke @ 2005-04-15 11:12 UTC (permalink / raw)
To: bluez-users; +Cc: bluez-devel
Was away for a few days, thanks for the replies which unfortunately seem
to suggest this is not a mere configuration issue I can fix from my side.
I've tried Linux 2.6.11.7 next and refetched btsco from cvs today: One
thing that seems to have changed is that I now get the confirmation
tone from the headset whenever aplay or arecord are started -
unfortunately I can still neither hear or record any audio with it
(even though that works fine using the Widcomm stack)...
hciconfig -a
hci0: Type: USB
BD Address: 00:02:72:80:A5:D3 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:13064 acl:364 sco:0 events:722 errors:0
TX bytes:8126 acl:339 sco:0 commands:182 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'localhost-0'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x33c LMP Ver: 1.1 (0x1) LMP Subver:
0x33c
Manufacturer: Cambridge Silicon Radio (10)
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
root@sigma:~# btsco -v 00:07:A4:95:41:76
btsco v0.4
Device is 1:0
Voice setting: 0x0060
RFCOMM channel 1 connected
recieved AT+CKPD=200
speaker volume: 3 mic volume: 15
driver is in use
connected SCO channel
Done setting sco fd
recieved AT+VGS=15
Sending up speaker change 15
recieved AT+VGS=03
Sending up speaker change 3
recieved AT+VGS=07
Sending up speaker change 7
recieved AT+VGS=11
Sending up speaker change 11
speaker volume: 11 mic volume: 15
driver is not in use
disconnected SCO channel
speaker volume: 11 mic volume: 15
driver is in use
connected SCO channel
Done setting sco fd
recieved AT+VGS=11
Sending up speaker change 11
speaker volume: 11 mic volume: 15
driver is not in use
disconnected SCO channel
RFCOMM channel lost
snd-bt-sco revision 1.6 $
snd-bt-sco: snd-bt-scod thread starting
snd-bt-sco: playback_open
Bluetooth: SCO (Voice Link) ver 0.4
Bluetooth: SCO socket layer initialized
snd-bt-sco: prepare ok bps: 16000 size: 8000 count: 2000
snd-bt-sco: playback_trigger 1
snd-bt-sco: setting playback to bspcm
snd-bt-sco: playback_trigger 0
snd-bt-sco: setting playback to NULL
snd-bt-sco: Disposing of previous socket count 2
snd-bt-sco: capture_open
snd-bt-sco: capture_prepare
snd-bt-sco: prepare ok bps: 16000 size: 8000 count: 2000
snd-bt-sco: capture_trigger 1
snd-bt-sco: setting capture to bspcm
snd-bt-sco: capture_trigger 0
snd-bt-sco: setting capture to NULL
snd-bt-sco: Disposing of previous socket count 2
--
HCI sniffer - Bluetooth packet analyzer ver 1.19
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:07:A4:95:41:76 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 05 04 ....
> HCI Event: Link Key Request (0x17) plen 6
0000: 76 41 95 a4 07 00 vA....
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr 00:07:A4:95:41:76
Link key: 39b150b8640b812d72b82f572be54b85
> HCI Event: Command Complete (0x0e) plen 10
0000: 01 0b 04 00 76 41 95 a4 07 00 ....vA....
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 2b 00 76 41 95 a4 07 00 01 01 .+.vA......
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 43 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Command Complete (0x0e) plen 6
0000: 01 0d 08 00 2b 00 ....+.
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
0000: 76 41 95 a4 07 00 01 vA.....
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x006a scid 0x0040 result 1 status 2
Connection pending - Authorization pending
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x006a scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x006a flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 48
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x006a flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 24
L2CAP(d): cid 0x006a len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x1108 (Headset)
max 65535
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 27
> ACL data: handle 43 flags 0x01 dlen 25
L2CAP(d): cid 0x0040 len 48 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x2b
count 38
cont 02 00 22
< ACL data: handle 43 flags 0x02 dlen 26
L2CAP(d): cid 0x006a len 22 [psm 1]
SDP SSA Req: tid 0x1 len 0x11
pat uuid-16 0x1108 (Headset)
max 65535
aid(s) 0x0000 - 0xffff
cont 02 00 22
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 27
> ACL data: handle 43 flags 0x01 dlen 19
L2CAP(d): cid 0x0040 len 42 [psm 1]
SDP SSA Rsp: tid 0x1 len 0x25
count 34
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10000
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1108 (Headset) uuid-16 0x1203 (Audio) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1108 (Headset) uint 0x100 > >
aid 0x0100 (SrvName)
str "Headset"
aid 0x0302 (unknown)
bool 0x1
cont 00
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x006a scid 0x0040
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Command Complete (0x0e) plen 6
0000: 01 25 0c 00 60 00 .%..`.
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0041
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x006a scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x006b scid 0x0041 result 1 status 2
Connection pending - Authorization pending
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x006b scid 0x0041 result 0 status 0
Connection successful
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x006b flags 0x00 clen 4
MTU 1024
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
MTU 1024
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x006b flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x006b len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 43 flags 0x02 dlen 18
L2CAP(d): cid 0x006b len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 1019 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 18
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 127 max_retrans 0 credits 0
< ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x006b len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(d): cid 0x006b len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(d): cid 0x006b len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
< ACL data: handle 43 flags 0x02 dlen 9
L2CAP(d): cid 0x006b len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 33
> ACL data: handle 43 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 15
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 20
L2CAP(d): cid 0x0041 len 16 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 12 fcs 0x40
0000: 41 54 2b 43 4b 50 44 3d 32 30 30 0d AT+CKPD=200.
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x006b len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
< ACL data: handle 43 flags 0x02 dlen 17
L2CAP(d): cid 0x006b len 13 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 9 fcs 0x9a
0000: 41 54 2b 56 47 53 3d 33 0d AT+VGS=3.
< ACL data: handle 43 flags 0x02 dlen 18
L2CAP(d): cid 0x006b len 14 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 10 fcs 0x9a
0000: 41 54 2b 56 47 4d 3d 31 35 0d AT+VGM=15.
< HCI Command: Add SCO Connection (0x01|0x0007) plen 4
handle 43 ptype 0x00e0
Packet type: HV1 HV2 HV3
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 07 04 ....
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 2e 00 76 41 95 a4 07 00 00 01 ...vA......
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 3
0000: 41 54 2b 56 47 53 3d 31 35 0d AT+VGS=15.
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x006b len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 1
0000: 41 54 2b 56 47 53 3d 30 33 0d AT+VGS=03.
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x006b len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 1
0000: 41 54 2b 56 47 53 3d 30 37 0d AT+VGS=07.
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x006b len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 1
0000: 41 54 2b 56 47 53 3d 31 31 0d AT+VGS=11.
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x006b len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Mode Change (0x14) plen 6
0000: 00 2b 00 02 00 08 .+....
< ACL data: handle 43 flags 0x02 dlen 18
L2CAP(d): cid 0x006b len 14 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 10 fcs 0x9a
0000: 41 54 2b 56 47 53 3d 31 31 0d AT+VGS=11.
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 46 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 06 04 ....
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Disconn Complete (0x05) plen 4
0000: 00 2e 00 16 ....
< HCI Command: Add SCO Connection (0x01|0x0007) plen 4
handle 43 ptype 0x00e0
Packet type: HV1 HV2 HV3
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 07 04 ....
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 29 00 76 41 95 a4 07 00 00 01 .).vA......
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 2
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 2
0000: 41 54 2b 56 47 53 3d 31 31 0d AT+VGS=11.
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x006b len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 41 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 06 04 ....
> HCI Event: Disconn Complete (0x05) plen 4
0000: 00 29 00 16 .)..
> HCI Event: Mode Change (0x14) plen 6
0000: 00 2b 00 00 00 00 .+....
> ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): DISC: cr 0 dlci 2 pf 1 ilen 0 fcs 0xd9
< ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x006b len 4 [psm 3]
RFCOMM(s): UA: cr 0 dlci 2 pf 1 ilen 0 fcs 0xf3
< ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x006b len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x006b scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x006b scid 0x0041
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 43 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 06 04 ....
> HCI Event: Disconn Complete (0x05) plen 4
0000: 00 2b 00 16 .+..
--
Original mail to bluez-users follows:
> Oops, forgot that info here:
>
> root@sigma:~# hcitool info 00:07:A4:95:41:76
> Requesting information ...
> BD Address: 00:07:A4:95:41:76
> Device Name: Jabra BT110
> LMP Version: 1.2 (0x2) LMP Subversion: 0x613
> Manufacturer: Cambridge Silicon Radio (10)
> Features: 0xfc 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
> <encryption> <slot offset> <timing accuracy> <role
> switch>
> <hold mode> <sniff mode> <park state> <RSSI> <channel
> quality>
> <SCO link> <HV2 packets> <HV3 packets> <u-law log>
> <A-law log>
> <CVSD> <paging scheme> <transparent SCO>
>
> On Mon, Apr 04, 2005 at 09:45:42PM +0200, Lars Steinke wrote:
> > Hi there,
> >
> > while running btsco I can successfully change my mixersettings via
> > the headset, so I assume the connection has been established just fine:
> >
> > root@sigma:~/src/btsco# ./btsco -v 00:07:A4:95:41:76 2
> > btsco v0.4
> > Device is 1:0
> > Voice setting: 0x0060
> > RFCOMM channel 2 connected
> > recieved AT+BRSF=24
> > recieved AT+VGS=03
> > Sending up speaker change 3
> > recieved AT+VGS=07
> > Sending up speaker change 7
> > recieved AT+VGS=11
> > Sending up speaker change 11
> > recieved AT+VGS=15
> > Sending up speaker change 15
> > speaker volume: 15 mic volume: 1
> > driver is in use
> > connected SCO channel
> > Done setting sco fd
> >
> > But I can neither hear sound nor record anything via the Jabra BT110
> > headset using BlueZ 20050328 with kernel 2.6.11:
> >
> > aplay -D plughw:Headset test.wav
> > Playing Sparc Audio 'test.wav' : Mu-Law, Rate 8000 Hz, Mono
> >
> > I just hear a raise in static when playback commences (even though mixer
> > levels are maxed in alsamixer!)...
> >
> > snd-bt-sco revision 1.6 $
> > snd-bt-sco: snd-bt-scod thread starting
> > snd-bt-sco: playback_open
> > snd-bt-sco: prepare ok bps: 16000 size: 8000 count: 2000
> > snd-bt-sco: playback_trigger 1
> > snd-bt-sco: setting playback to bspcm
> >
> > root@sigma:~# hcitool con
> > Connections:
> > < SCO 00:07:A4:95:41:76 handle 44 state 1 lm SLAVE
> > < ACL 00:07:A4:95:41:76 handle 41 state 1 lm MASTER
> > root@sigma:~# hciconfig hci0
> > hci0: Type: USB
> > BD Address: 00:02:72:80:A5:D3 ACL MTU: 192:8 SCO MTU: 64:8
> > UP RUNNING PSCAN ISCAN
> > RX bytes:9966 acl:207 sco:0 events:535 errors:0
> > TX bytes:6279 acl:191 sco:0 commands:195 errors:0
> >
> > root@sigma:~# hciconfig hci0 revision
> > hci0: Type: USB
> > BD Address: 00:02:72:80:A5:D3 ACL MTU: 192:8 SCO MTU: 64:8
> > HCI 16.14
> > Chip version: BlueCore02-External
> > Max key size: 56 bit
> > SCO mapping: HCI
> >
> > Audio works fine with that headset and dongle using the Widcomm stack
> > 1.4 under Windoze ;(...
> >
> > Regards,
> > Lars
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2005-05-20 23:14 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-05-15 21:20 [Bluez-users] Old known, Apple BT Keyboard Jesús Cano Navarro
2005-05-15 21:34 ` Marco Trudel
2005-05-16 4:46 ` Andre Baron
2005-05-16 20:49 ` Jesús Cano Navarro
2005-05-20 17:46 ` Jesús Cano Navarro
2005-05-20 20:10 ` [Bluez-users] Re: btsco - headset profile activated but no sco packets transmitted ??? Jan H
2005-05-20 20:18 ` Brad Midgley
2005-05-20 23:14 ` Jan H
-- strict thread matches above, loose matches on Subject: below --
2005-04-04 19:45 [Bluez-users] " Lars Steinke
2005-04-04 19:50 ` [Bluez-users] " Lars Steinke
2005-04-15 11:12 ` Lars Steinke
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.