All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff Garzik <jgarzik@pobox.com>
To: "linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>,
	Linux Kernel <linux-kernel@vger.kernel.org>
Cc: Mark Lord <liml@rtr.ca>, Jens Axboe <axboe@suse.de>,
	Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Subject: [PATCH][RFT] libata: fix use-after-free during driver unload/unplug
Date: Fri, 27 May 2005 00:18:27 -0400	[thread overview]
Message-ID: <42969F93.1030106@pobox.com> (raw)
In-Reply-To: <42967F4A.9030705@pobox.com>

[-- Attachment #1: Type: text/plain, Size: 92 bytes --]

Jeff Garzik wrote:
> Attached is the patch I committed, please test.

Again, with feeling.


[-- Attachment #2: patch --]
[-- Type: text/plain, Size: 6521 bytes --]

diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -289,6 +289,8 @@ static void ahci_host_stop(struct ata_ho
 {
 	struct ahci_host_priv *hpriv = host_set->private_data;
 	kfree(hpriv);
+
+	ata_host_stop(host_set);
 }
 
 static int ahci_port_start(struct ata_port *ap)
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -153,6 +153,7 @@ static struct ata_port_operations piix_p
 
 	.port_start		= ata_port_start,
 	.port_stop		= ata_port_stop,
+	.host_stop		= ata_host_stop,
 };
 
 static struct ata_port_operations piix_sata_ops = {
@@ -180,6 +181,7 @@ static struct ata_port_operations piix_s
 
 	.port_start		= ata_port_start,
 	.port_stop		= ata_port_stop,
+	.host_stop		= ata_host_stop,
 };
 
 static struct ata_port_info piix_port_info[] = {
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -3321,6 +3321,13 @@ void ata_port_stop (struct ata_port *ap)
 	dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
 }
 
+void ata_host_stop (struct ata_host_set *host_set)
+{
+	if (host_set->mmio_base)
+		iounmap(host_set->mmio_base);
+}
+
+
 /**
  *	ata_host_remove - Unregister SCSI host structure with upper layers
  *	@ap: Port to unregister
@@ -3877,10 +3884,6 @@ void ata_pci_remove_one (struct pci_dev 
 	}
 
 	free_irq(host_set->irq, host_set);
-	if (host_set->ops->host_stop)
-		host_set->ops->host_stop(host_set);
-	if (host_set->mmio_base)
-		iounmap(host_set->mmio_base);
 
 	for (i = 0; i < host_set->n_ports; i++) {
 		ap = host_set->ports[i];
@@ -3899,6 +3902,9 @@ void ata_pci_remove_one (struct pci_dev 
 		scsi_host_put(ap->host);
 	}
 
+	if (host_set->ops->host_stop)
+		host_set->ops->host_stop(host_set);
+
 	kfree(host_set);
 
 	pci_release_regions(pdev);
@@ -3996,6 +4002,7 @@ EXPORT_SYMBOL_GPL(ata_chk_err);
 EXPORT_SYMBOL_GPL(ata_exec_command);
 EXPORT_SYMBOL_GPL(ata_port_start);
 EXPORT_SYMBOL_GPL(ata_port_stop);
+EXPORT_SYMBOL_GPL(ata_host_stop);
 EXPORT_SYMBOL_GPL(ata_interrupt);
 EXPORT_SYMBOL_GPL(ata_qc_prep);
 EXPORT_SYMBOL_GPL(ata_bmdma_setup);
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -329,6 +329,8 @@ static void nv_host_stop (struct ata_hos
 		host->host_desc->disable_hotplug(host_set);
 
 	kfree(host);
+
+	ata_host_stop(host_set);
 }
 
 static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -122,6 +122,7 @@ static struct ata_port_operations pdc_at
 	.scr_write		= pdc_sata_scr_write,
 	.port_start		= pdc_port_start,
 	.port_stop		= pdc_port_stop,
+	.host_stop		= ata_host_stop,
 };
 
 static struct ata_port_info pdc_port_info[] = {
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -536,6 +536,8 @@ static void qs_host_stop(struct ata_host
 
 	writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
 	writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
+
+	ata_host_stop(host_set);
 }
 
 static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -161,6 +161,7 @@ static struct ata_port_operations sil_op
 	.scr_write		= sil_scr_write,
 	.port_start		= ata_port_start,
 	.port_stop		= ata_port_stop,
+	.host_stop		= ata_host_stop,
 };
 
 static struct ata_port_info sil_port_info[] = {
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -114,6 +114,7 @@ static struct ata_port_operations sis_op
 	.scr_write		= sis_scr_write,
 	.port_start		= ata_port_start,
 	.port_stop		= ata_port_stop,
+	.host_stop		= ata_host_stop,
 };
 
 static struct ata_port_info sis_port_info = {
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -313,6 +313,7 @@ static struct ata_port_operations k2_sat
 	.scr_write		= k2_sata_scr_write,
 	.port_start		= ata_port_start,
 	.port_stop		= ata_port_stop,
+	.host_stop		= ata_host_stop,
 };
 
 static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base)
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -245,6 +245,8 @@ static void pdc20621_host_stop(struct at
 
 	iounmap(dimm_mmio);
 	kfree(hpriv);
+
+	ata_host_stop(host_set);
 }
 
 static int pdc_port_start(struct ata_port *ap)
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -113,6 +113,7 @@ static struct ata_port_operations uli_op
 
 	.port_start		= ata_port_start,
 	.port_stop		= ata_port_stop,
+	.host_stop		= ata_host_stop,
 };
 
 static struct ata_port_info uli_port_info = {
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -134,6 +134,7 @@ static struct ata_port_operations svia_s
 
 	.port_start		= ata_port_start,
 	.port_stop		= ata_port_stop,
+	.host_stop		= ata_host_stop,
 };
 
 static struct ata_port_info svia_port_info = {
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -230,6 +230,7 @@ static struct ata_port_operations vsc_sa
 	.scr_write		= vsc_sata_scr_write,
 	.port_start		= ata_port_start,
 	.port_stop		= ata_port_stop,
+	.host_stop		= ata_host_stop,
 };
 
 static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base)
diff --git a/include/linux/libata.h b/include/linux/libata.h
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -410,6 +410,7 @@ extern u8 ata_chk_err(struct ata_port *a
 extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf);
 extern int ata_port_start (struct ata_port *ap);
 extern void ata_port_stop (struct ata_port *ap);
+extern void ata_host_stop (struct ata_host_set *host_set);
 extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
 extern void ata_qc_prep(struct ata_queued_cmd *qc);
 extern int ata_qc_issue_prot(struct ata_queued_cmd *qc);

      reply	other threads:[~2005-05-27  4:18 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-05-26 19:28 [PATCH] libata: fix use-after-free during driver unload/unplug Jeff Garzik
2005-05-26 21:33 ` Mark Lord
2005-05-27  1:21   ` Jeff Garzik
2005-05-27  1:32     ` Mark Lord
2005-05-27  2:00       ` [PATCH][RFT] " Jeff Garzik
2005-05-27  4:18         ` Jeff Garzik [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=42969F93.1030106@pobox.com \
    --to=jgarzik@pobox.com \
    --cc=axboe@suse.de \
    --cc=liml@rtr.ca \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=viro@parcelfarce.linux.theplanet.co.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.