[U-Boot-Users] u-boot debugging

[U-Boot-Users] u-boot debugging

[McMullan, Jason]

I have a BDI-2000, and would like to debug u-boot on my PQ2FADS board,
but the relocation mechanism is making the remote GDB connection quite
a pain to align the u-boot ELF to the addresses it's been relocated to.

I'm new to u-boot, and I was wondering is there is any documentation
for setting up the u-boot to run as 'execute-in-place' code?


-- 
Jason McMullan <jason.mcmullan@timesys.com>
TimeSys Corporation

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.denx.de/pipermail/u-boot/attachments/20050610/7ac69b07/attachment.pgp 

[U-Boot-Users] u-boot debugging

[Jerry Van Baren]

McMullan, Jason wrote:
> I have a BDI-2000, and would like to debug u-boot on my PQ2FADS board,
> but the relocation mechanism is making the remote GDB connection quite
> a pain to align the u-boot ELF to the addresses it's been relocated to.
> 
> I'm new to u-boot, and I was wondering is there is any documentation
> for setting up the u-boot to run as 'execute-in-place' code?

A better solution:
<http://www.denx.de/twiki/bin/view/DULG/DebuggingUBoot#Section_10.1.2.>

gvb

[U-Boot-Users] u-boot debugging

[Wolfgang Denk]

In message <1118411877.7564.34.camel@jmcmullan.timesys> <1118411877.7564.34.camel@jmcmullan.timesys> you wrote:
> 
> I have a BDI-2000, and would like to debug u-boot on my PQ2FADS board,
> but the relocation mechanism is making the remote GDB connection quite
> a pain to align the u-boot ELF to the addresses it's been relocated to.

You call a single "symbol-file" command a pain? C'me on...

> I'm new to u-boot, and I was wondering is there is any documentation
> for setting up the u-boot to run as 'execute-in-place' code?

No. You don't want to do that. You did read the manual and especially
the FAQ, didn't you?

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The following statement is not true.  The previous statement is true.