PROBLEM: libata + sata_sil on sil3112 dosen't work proper

PROBLEM: libata + sata_sil on sil3112 dosen't work proper

[Nicolo Chiellini]

Hi All

I have a problem whit a raid controller using SATA SIL 3112 chipset, when i 
try to load libata and sata_sil modules i got this proble:

root@SERVER1:~# modprobe sata_sil

Message from syslogd@SERVER1 at Sat Jun 18 14:57:08 2005 ...
SERVER1 kernel: Disabling IRQ #11

and on dmesg:

libata version 1.11 loaded.
sata_sil version 0.9
PCI: Found IRQ 11 for device 0000:02:0b.0
PCI: Sharing IRQ 11 with 0000:00:1f.4
ata1: SATA max UDMA/100 cmd 0xE1A2E080 ctl 0xE1A2E08A bmdma 0xE1A2E000 irq 
11
ata2: SATA max UDMA/100 cmd 0xE1A2E0C0 ctl 0xE1A2E0CA bmdma 0xE1A2E008 irq 
11
irq 11: nobody cared!
[<c013d15a>] __report_bad_irq+0x2a/0xa0
[<c013cb00>] handle_IRQ_event+0x30/0x70
[<c013d260>] note_interrupt+0x70/0xb0
[<c013cc50>] __do_IRQ+0x110/0x120
[<c01057c9>] do_IRQ+0x19/0x30
[<c0103b32>] common_interrupt+0x1a/0x20
[<c011e84e>] __do_softirq+0x2e/0x90
[<c011e8d6>] do_softirq+0x26/0x30
[<c011e9a5>] irq_exit+0x35/0x40
[<c01057ce>] do_IRQ+0x1e/0x30
[<c0103b32>] common_interrupt+0x1a/0x20
[<c0101030>] default_idle+0x0/0x30
[<c0101053>] default_idle+0x23/0x30
[<c01010f0>] cpu_idle+0x50/0x60
[<c059e86d>] start_kernel+0x18d/0x1d0
[<c059e3d0>] unknown_bootoption+0x0/0x1e0
handlers:
[<c03516f0>] (usb_hcd_irq+0x0/0x70)
[<c03516f0>] (usb_hcd_irq+0x0/0x70)
[<c03bed10>] (snd_intel8x0_interrupt+0x0/0x240)
[<e1a47720>] (ata_interrupt+0x0/0x130 [libata])
Disabling IRQ #11
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 
88:207f
ata1: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48

I've encountered this error on all 2.6.x


Some system's infos:

from sh scripts/ver_linux :

Linux SERVER1 2.6.12 #1 Sat Jun 18 14:42:16 CEST 2005 i686 unknown unknown 
GNU/Linux

Gnu C                  3.3.4
Gnu make               3.80
binutils               2.15.90.0.3
util-linux             2.12a
mount                  2.12a
module-init-tools      3.0
e2fsprogs              1.35
jfsutils               1.1.6
reiserfsprogs          3.6.17
reiser4progs           line
xfsprogs               2.6.13
pcmcia-cs              3.2.7
quota-tools            3.12.
PPP                    2.4.2
nfs-utils              1.0.6
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Linux C++ Library      5.0.6
Procps                 3.2.1
Net-tools              1.60
Kbd                    1.12
Sh-utils               5.2.1
udev                   026
Modules Loaded         sata_sil libata ipv6 evdev

from lspci:

00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge 
(rev 03)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge 
(rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI 
Bridge (rev 12)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 12)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 12)
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio 
(rev 12)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY 
[Radeon 7000/VE]
02:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 (rev 
10)
02:0b.0 Unknown mass storage controller: CMD Technology Inc Silicon Image 
SiI 3112 SATARaid Controller (rev 01)
02:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)

from /proc/ioports:

0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
4000-407f : 0000:00:1f.0
4080-40bf : 0000:00:1f.0
a000-a0ff : 0000:02:06.0
  a000-a0ff : r8169
a400-a407 : 0000:02:0b.0
  a400-a407 : sata_sil
a800-a803 : 0000:02:0b.0
  a800-a803 : sata_sil
ac00-ac07 : 0000:02:0b.0
  ac00-ac07 : sata_sil
b000-b003 : 0000:02:0b.0
  b000-b003 : sata_sil
b400-b40f : 0000:02:0b.0
  b400-b40f : sata_sil
b800-b8ff : 0000:02:0d.0
  b800-b8ff : 8139too
c000-cfff : PCI Bus #01
  c000-c0ff : 0000:01:00.0
    c000-c0ff : radeonfb
d000-d01f : 0000:00:1f.2
  d000-d01f : uhci_hcd
d400-d41f : 0000:00:1f.4
  d400-d41f : uhci_hcd
d800-d8ff : 0000:00:1f.5
  d800-d8ff : Intel 82801BA-ICH2
dc00-dc3f : 0000:00:1f.5
  dc00-dc3f : Intel 82801BA-ICH2
f000-f00f : 0000:00:1f.1
  f000-f007 : ide0
  f008-f00f : ide1



Thanks for support

Re: PROBLEM: libata + sata_sil on sil3112 dosen't work proper

[Jeff Garzik]

Nicolo Chiellini wrote:
> I have a problem whit a raid controller using SATA SIL 3112 chipset, 

This is not a RAID controller.

http://linux.yyz.us/sata/faq-sata-raid.html#sii

	Jeff

Re: PROBLEM: libata + sata_sil on sil3112 dosen't work proper

[Nicolo Chiellini]

Thank you for the fast reply,

>>I have a problem whit a raid controller using SATA SIL 3112 chipset, [..]

>This is not a RAID controller.
>http://linux.yyz.us/sata/faq-sata-raid.html#sii
>Jeff

You have reason about that but the problem is not on RAID Sw, is not even 
setted up atm and i need use it like SATA controller.
When i try to load sata_sil the system give problems describted on the first 
mail and, the worst think, if the modules is builded static on kernel the 
machine hang on boot time when it try to recognize the controller.
The same module work fine whit SIL 3114 and sata disks.

Thanks, Nicolo'