* [lm-sensors] Unsupported mBMC on Intel SE7320SP2
@ 2005-07-06 17:40 Schäfer Raumgestaltung
2005-07-06 21:36 ` Richard Hirst
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Schäfer Raumgestaltung @ 2005-07-06 17:40 UTC (permalink / raw)
To: lm-sensors
Chips on this Board:
Super-I/O National (now Winbond) PC 87427
mBMC National PC 87431
No Info available as i read in Section 'newdrivers'
I found some 'Documentation' on INTEL Support CD (see partial Cut below)
if useful, please E-Mail for further Data.......
hth
Uli
//****************************************************************************
//
// File Header Information
//
_LF_NAME 'SE7320SP2/SE7525GP2 SDR File'
_LF_VERSION '1.10'
_LF_FMT_VER '1.50'
_IPMI_VERSION '1.50'
//
// SDR Header Information
//
_SDR (
_START_ADDR 0000
_DATA_LEN 0000
_NVS_TYPE 'IMBDEVICE'
_DEV_BUS FF
_DEV_ADDRESS 20
// ================================
######################## Cut here '##########################################
// ================================
// CPU1 12V Sensor SDR entry (0Ah)
// ================================
_SDR_TYPE 01
_REC_LEN 0038
// Sensor Record Header
000B // Record ID
51 // SDR Version
01 // Record Type
33 // Record Length
// Record Key Bytes
20 // Sensor Owner ID
00 // Sensor Owner LUN
0A // Sensor Number
// Record Body Bytes
07 // Entity ID
01 // Entity Instance
79 // Sensor Initialization
68 // Sensor Capabilities
02 // Sensor Type
01 // Event / Reading Base Type
8532 // Assertion Event Mask
8532 // Deassertion Event Mask
1B1B // Reading Mask & Settable / Readable Threshold Masks
00 // Sensor Units 1
04 // Sensor Units 2
00 // Sensor Units 3
00 // Linearization
3E // M
00 // M, Tolerance
60 // B
00 // B, Accuracy
00 // Accuracy, Accuracy Exp
D0 // R exp, B exp
07 // Analog characteristic flags
C1 // Nominal Reading
D2 // Normal Maximum
B3 // Normal Minimum
FF // Sensor Maximum Reading
00 // Sensor Minimum Reading
00 // Upper non-recoverable
D9 // Upper critical
D3 // Upper non-critical
00 // Lower non-recoverable
AD // Lower critical
B2 // Lower non-critical
02 // Positive hysterisis value
02 // Negative hysterisis value
00 // Reserved
00 // Reserved
00 // OEM
C8 // Type/Length Code
'CPU1 12V' // String Bytes
######################## Cut here '##########################################
// ================================
// Proc1 VCCP Sensor SDR entry (15h)
// ================================
_SDR_TYPE 02
_REC_LEN 002A
// Sensor Record Header
0016 // Record ID
51 // SDR Version
02 // Record Type
25 // Record Length
// Record Key Bytes
20 // Sensor Owner ID
00 // Sensor Owner LUN
15 // Sensor Number
// Record Body Bytes
03 // Entity ID
01 // Entity Instance
79 // Sensor Initialization
68 // Sensor Capabilities
02 // Sensor Type
03 // Event / Reading Base Type
0100 // Assertion Event Mask
0100 // Deassertion Event Mask
0100 // Reading Mask & Settable / Readable Threshold Masks
C0 // Sensor Units 1
00 // Sensor Units 2
00 // Sensor Units 3
0100 // Sensor Record Sharing
00 // Positive-going Threshold Hysteresis
00 // Negative-going Threshold Hysteresis
00 // Reserved
00 // Reserved
00 // Reserved
00 // OEM
CA // Type/Length Code
'Proc1 VCCP' // String Bytes
^ permalink raw reply [flat|nested] 4+ messages in thread* [lm-sensors] Unsupported mBMC on Intel SE7320SP2
2005-07-06 17:40 [lm-sensors] Unsupported mBMC on Intel SE7320SP2 Schäfer Raumgestaltung
@ 2005-07-06 21:36 ` Richard Hirst
2005-07-06 21:36 ` Jeff Bloom
2005-07-06 21:36 ` Mark Studebaker
2 siblings, 0 replies; 4+ messages in thread
From: Richard Hirst @ 2005-07-06 21:36 UTC (permalink / raw)
To: lm-sensors
Check out this thread:
<http://lists.lm-sensors.org/pipermail/lm-sensors/2005-June/012825.html>
Sounds like you have the same chips as me, at least. With appropriate
kernel patches I am able to read the sensors.
Richard
On Tue, Jul 05, 2005 at 08:47:06PM +0200, Sch?fer Raumgestaltung wrote:
> Chips on this Board:
>
> Super-I/O National (now Winbond) PC 87427
> mBMC National PC 87431
>
> No Info available as i read in Section 'newdrivers'
>
> I found some 'Documentation' on INTEL Support CD (see partial Cut below)
>
> if useful, please E-Mail for further Data.......
>
> hth
>
> Uli
>
>
> //****************************************************************************
>
>
> //
> // File Header Information
> //
>
> _LF_NAME 'SE7320SP2/SE7525GP2 SDR File'
> _LF_VERSION '1.10'
> _LF_FMT_VER '1.50'
> _IPMI_VERSION '1.50'
>
> //
> // SDR Header Information
> //
>
> _SDR (
> _START_ADDR 0000
> _DATA_LEN 0000
> _NVS_TYPE 'IMBDEVICE'
> _DEV_BUS FF
> _DEV_ADDRESS 20
>
>
> // ================================
>
> ######################## Cut here '##########################################
>
> // ================================
> // CPU1 12V Sensor SDR entry (0Ah)
> // ================================
>
> _SDR_TYPE 01
> _REC_LEN 0038
>
> // Sensor Record Header
> 000B // Record ID
> 51 // SDR Version
> 01 // Record Type
> 33 // Record Length
>
> // Record Key Bytes
> 20 // Sensor Owner ID
> 00 // Sensor Owner LUN
> 0A // Sensor Number
>
> // Record Body Bytes
> 07 // Entity ID
> 01 // Entity Instance
> 79 // Sensor Initialization
> 68 // Sensor Capabilities
> 02 // Sensor Type
> 01 // Event / Reading Base Type
> 8532 // Assertion Event Mask
> 8532 // Deassertion Event Mask
> 1B1B // Reading Mask & Settable / Readable Threshold Masks
> 00 // Sensor Units 1
> 04 // Sensor Units 2
> 00 // Sensor Units 3
> 00 // Linearization
> 3E // M
> 00 // M, Tolerance
> 60 // B
> 00 // B, Accuracy
> 00 // Accuracy, Accuracy Exp
> D0 // R exp, B exp
> 07 // Analog characteristic flags
> C1 // Nominal Reading
> D2 // Normal Maximum
> B3 // Normal Minimum
> FF // Sensor Maximum Reading
> 00 // Sensor Minimum Reading
> 00 // Upper non-recoverable
> D9 // Upper critical
> D3 // Upper non-critical
> 00 // Lower non-recoverable
> AD // Lower critical
> B2 // Lower non-critical
> 02 // Positive hysterisis value
> 02 // Negative hysterisis value
> 00 // Reserved
> 00 // Reserved
> 00 // OEM
> C8 // Type/Length Code
> 'CPU1 12V' // String Bytes
>
>
> ######################## Cut here '##########################################
>
> // ================================
> // Proc1 VCCP Sensor SDR entry (15h)
> // ================================
> _SDR_TYPE 02
> _REC_LEN 002A
>
> // Sensor Record Header
> 0016 // Record ID
> 51 // SDR Version
> 02 // Record Type
> 25 // Record Length
>
> // Record Key Bytes
> 20 // Sensor Owner ID
> 00 // Sensor Owner LUN
> 15 // Sensor Number
>
> // Record Body Bytes
> 03 // Entity ID
> 01 // Entity Instance
> 79 // Sensor Initialization
> 68 // Sensor Capabilities
> 02 // Sensor Type
> 03 // Event / Reading Base Type
> 0100 // Assertion Event Mask
> 0100 // Deassertion Event Mask
> 0100 // Reading Mask & Settable / Readable Threshold Masks
> C0 // Sensor Units 1
> 00 // Sensor Units 2
> 00 // Sensor Units 3
> 0100 // Sensor Record Sharing
> 00 // Positive-going Threshold Hysteresis
> 00 // Negative-going Threshold Hysteresis
> 00 // Reserved
> 00 // Reserved
> 00 // Reserved
> 00 // OEM
> CA // Type/Length Code
> 'Proc1 VCCP' // String Bytes
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 4+ messages in thread
* [lm-sensors] Unsupported mBMC on Intel SE7320SP2
2005-07-06 17:40 [lm-sensors] Unsupported mBMC on Intel SE7320SP2 Schäfer Raumgestaltung
2005-07-06 21:36 ` Richard Hirst
@ 2005-07-06 21:36 ` Jeff Bloom
2005-07-06 21:36 ` Mark Studebaker
2 siblings, 0 replies; 4+ messages in thread
From: Jeff Bloom @ 2005-07-06 21:36 UTC (permalink / raw)
To: lm-sensors
Try the following link below where you need the kernel patch for ipmi_smb_intf driver
http://sourceforge.net/projects/openipmi/
Follow the link above for the 2.4 or 2.6 kernel.
Also you need the i801 driver to be loaded.
I hope this helps as this worked for me on a SE7320VP2 platform.
-JB
-----Original Message-----
From: Sch?fer Raumgestaltung [mailto:ulrich@schaefer-raumgestaltung.de]
Sent: Tuesday, July 05, 2005 2:47 PM
To: lm-sensors@lm-sensors.org
Subject: [lm-sensors] Unsupported mBMC on Intel SE7320SP2
Chips on this Board:
Super-I/O National (now Winbond) PC 87427
mBMC National PC 87431
No Info available as i read in Section 'newdrivers'
I found some 'Documentation' on INTEL Support CD (see partial Cut below)
if useful, please E-Mail for further Data.......
hth
Uli
//****************************************************************************
//
// File Header Information
//
_LF_NAME 'SE7320SP2/SE7525GP2 SDR File'
_LF_VERSION '1.10'
_LF_FMT_VER '1.50'
_IPMI_VERSION '1.50'
//
// SDR Header Information
//
_SDR (
_START_ADDR 0000
_DATA_LEN 0000
_NVS_TYPE 'IMBDEVICE'
_DEV_BUS FF
_DEV_ADDRESS 20
// ================================
######################## Cut here '##########################################
// ================================
// CPU1 12V Sensor SDR entry (0Ah)
// ================================
_SDR_TYPE 01
_REC_LEN 0038
// Sensor Record Header
000B // Record ID
51 // SDR Version
01 // Record Type
33 // Record Length
// Record Key Bytes
20 // Sensor Owner ID
00 // Sensor Owner LUN
0A // Sensor Number
// Record Body Bytes
07 // Entity ID
01 // Entity Instance
79 // Sensor Initialization
68 // Sensor Capabilities
02 // Sensor Type
01 // Event / Reading Base Type
8532 // Assertion Event Mask
8532 // Deassertion Event Mask
1B1B // Reading Mask & Settable / Readable Threshold Masks
00 // Sensor Units 1
04 // Sensor Units 2
00 // Sensor Units 3
00 // Linearization
3E // M
00 // M, Tolerance
60 // B
00 // B, Accuracy
00 // Accuracy, Accuracy Exp
D0 // R exp, B exp
07 // Analog characteristic flags
C1 // Nominal Reading
D2 // Normal Maximum
B3 // Normal Minimum
FF // Sensor Maximum Reading
00 // Sensor Minimum Reading
00 // Upper non-recoverable
D9 // Upper critical
D3 // Upper non-critical
00 // Lower non-recoverable
AD // Lower critical
B2 // Lower non-critical
02 // Positive hysterisis value
02 // Negative hysterisis value
00 // Reserved
00 // Reserved
00 // OEM
C8 // Type/Length Code
'CPU1 12V' // String Bytes
######################## Cut here '##########################################
// ================================
// Proc1 VCCP Sensor SDR entry (15h)
// ================================
_SDR_TYPE 02
_REC_LEN 002A
// Sensor Record Header
0016 // Record ID
51 // SDR Version
02 // Record Type
25 // Record Length
// Record Key Bytes
20 // Sensor Owner ID
00 // Sensor Owner LUN
15 // Sensor Number
// Record Body Bytes
03 // Entity ID
01 // Entity Instance
79 // Sensor Initialization
68 // Sensor Capabilities
02 // Sensor Type
03 // Event / Reading Base Type
0100 // Assertion Event Mask
0100 // Deassertion Event Mask
0100 // Reading Mask & Settable / Readable Threshold Masks
C0 // Sensor Units 1
00 // Sensor Units 2
00 // Sensor Units 3
0100 // Sensor Record Sharing
00 // Positive-going Threshold Hysteresis
00 // Negative-going Threshold Hysteresis
00 // Reserved
00 // Reserved
00 // Reserved
00 // OEM
CA // Type/Length Code
'Proc1 VCCP' // String Bytes
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 4+ messages in thread
* [lm-sensors] Unsupported mBMC on Intel SE7320SP2
2005-07-06 17:40 [lm-sensors] Unsupported mBMC on Intel SE7320SP2 Schäfer Raumgestaltung
2005-07-06 21:36 ` Richard Hirst
2005-07-06 21:36 ` Jeff Bloom
@ 2005-07-06 21:36 ` Mark Studebaker
2 siblings, 0 replies; 4+ messages in thread
From: Mark Studebaker @ 2005-07-06 21:36 UTC (permalink / raw)
To: lm-sensors
the newdrivers page does indeed have info on the 87431.
Sch?fer Raumgestaltung wrote:
> Chips on this Board:
>
> Super-I/O National (now Winbond) PC 87427
> mBMC National PC 87431
>
> No Info available as i read in Section 'newdrivers'
>
> I found some 'Documentation' on INTEL Support CD (see partial Cut below)
>
> if useful, please E-Mail for further Data.......
>
> hth
>
> Uli
>
>
> //****************************************************************************
>
>
> //
> // File Header Information
> //
>
> _LF_NAME 'SE7320SP2/SE7525GP2 SDR File'
> _LF_VERSION '1.10'
> _LF_FMT_VER '1.50'
> _IPMI_VERSION '1.50'
>
> //
> // SDR Header Information
> //
>
> _SDR (
> _START_ADDR 0000
> _DATA_LEN 0000
> _NVS_TYPE 'IMBDEVICE'
> _DEV_BUS FF
> _DEV_ADDRESS 20
>
>
> // ================================
>
> ######################## Cut here '##########################################
>
> // ================================
> // CPU1 12V Sensor SDR entry (0Ah)
> // ================================
>
> _SDR_TYPE 01
> _REC_LEN 0038
>
> // Sensor Record Header
> 000B // Record ID
> 51 // SDR Version
> 01 // Record Type
> 33 // Record Length
>
> // Record Key Bytes
> 20 // Sensor Owner ID
> 00 // Sensor Owner LUN
> 0A // Sensor Number
>
> // Record Body Bytes
> 07 // Entity ID
> 01 // Entity Instance
> 79 // Sensor Initialization
> 68 // Sensor Capabilities
> 02 // Sensor Type
> 01 // Event / Reading Base Type
> 8532 // Assertion Event Mask
> 8532 // Deassertion Event Mask
> 1B1B // Reading Mask & Settable / Readable Threshold Masks
> 00 // Sensor Units 1
> 04 // Sensor Units 2
> 00 // Sensor Units 3
> 00 // Linearization
> 3E // M
> 00 // M, Tolerance
> 60 // B
> 00 // B, Accuracy
> 00 // Accuracy, Accuracy Exp
> D0 // R exp, B exp
> 07 // Analog characteristic flags
> C1 // Nominal Reading
> D2 // Normal Maximum
> B3 // Normal Minimum
> FF // Sensor Maximum Reading
> 00 // Sensor Minimum Reading
> 00 // Upper non-recoverable
> D9 // Upper critical
> D3 // Upper non-critical
> 00 // Lower non-recoverable
> AD // Lower critical
> B2 // Lower non-critical
> 02 // Positive hysterisis value
> 02 // Negative hysterisis value
> 00 // Reserved
> 00 // Reserved
> 00 // OEM
> C8 // Type/Length Code
> 'CPU1 12V' // String Bytes
>
>
> ######################## Cut here '##########################################
>
> // ================================
> // Proc1 VCCP Sensor SDR entry (15h)
> // ================================
> _SDR_TYPE 02
> _REC_LEN 002A
>
> // Sensor Record Header
> 0016 // Record ID
> 51 // SDR Version
> 02 // Record Type
> 25 // Record Length
>
> // Record Key Bytes
> 20 // Sensor Owner ID
> 00 // Sensor Owner LUN
> 15 // Sensor Number
>
> // Record Body Bytes
> 03 // Entity ID
> 01 // Entity Instance
> 79 // Sensor Initialization
> 68 // Sensor Capabilities
> 02 // Sensor Type
> 03 // Event / Reading Base Type
> 0100 // Assertion Event Mask
> 0100 // Deassertion Event Mask
> 0100 // Reading Mask & Settable / Readable Threshold Masks
> C0 // Sensor Units 1
> 00 // Sensor Units 2
> 00 // Sensor Units 3
> 0100 // Sensor Record Sharing
> 00 // Positive-going Threshold Hysteresis
> 00 // Negative-going Threshold Hysteresis
> 00 // Reserved
> 00 // Reserved
> 00 // Reserved
> 00 // OEM
> CA // Type/Length Code
> 'Proc1 VCCP' // String Bytes
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2005-07-06 21:36 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-07-06 17:40 [lm-sensors] Unsupported mBMC on Intel SE7320SP2 Schäfer Raumgestaltung
2005-07-06 21:36 ` Richard Hirst
2005-07-06 21:36 ` Jeff Bloom
2005-07-06 21:36 ` Mark Studebaker
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.