[LARTC] Load Balancing and NAT Clients Problem

[LARTC] Load Balancing and NAT Clients Problem

[ZeuS SN]

Hi,

The problem is that if I set the default route with two gateways, with 
the command 'ip route change default scope global nexthop via $P1 dev 
$IF1 weight 1 nexthop via $P1 dev $IF1 weight 1, in the linux router I 
have no problem working with internet but the NATTED clients can't 
access. I have iptables configured with masquerade option.

What I forget to do?

Thanks and Regards...
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Re: [LARTC] Load Balancing and NAT Clients Problem

[Ow Mun Heng]

On Fri, 2005-07-29 at 22:20 +0100, ZeuS SN wrote:
> Hi,
> 
> The problem is that if I set the default route with two gateways, with 
> the command 'ip route change default scope global nexthop via $P1 dev 
> $IF1 weight 1 nexthop via $P1 dev $IF1 weight 1, in the linux router I 
> have no problem working with internet but the NATTED clients can't 
> access. I have iptables configured with masquerade option.

I don't understand. you habe 2 gateways at the router. What are the
NATTED clients pointing at. Sounds to me like the don't have
permissions / are not routed correctly.

hence they can't go on the net.

-- 
Ow Mun Heng
Gentoo/Linux on DELL D600 1.4Ghz 1.5GB RAM
98% Microsoft(tm) Free!! 
Neuromancer 12:15:11 up 8 days, 18:27, 5 users, load average: 0.32,
0.24, 0.24 


_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc