Re: MPC885ADS and 2.6.13-rc5 - nogo ?

[Vitaly Bordug <vbordug@ru.mvista.com>]

[-- Attachment #1: Type: text/plain, Size: 952 bytes --]

Schaefer-Hutter, Peter wrote:

>Hello Vitaly, 
>
>  
>
>>From: Vitaly Bordug [mailto:vbordug@ru.mvista.com] 
>>
>>Mentioned support should work `out-of-the box`.
>>Make sure you have console=ttyCPM0,115200 (or whatever baudrate you 
>>have) within bootargs in the U-Boot environment. U-Boot modification
>>    
>>
>is 
>  
>
>>needed only if you wish to have both FEC MAC addresses configured via 
>>U-Boot env as well. Also only the related defconfig should be used.
>>    
>>
>
>I have the bootargs, but still nogo - even with the mpc885ads_defconfig.
>
>Besides, in the mpc885ads_defconfig CONFIG_SCC3_ENET is set but in the
>patch
>description it reads as if only SCC1 is supported...
>
> Best Regards,
>
>  Peter
>
>  
>
The board does not hang - there's somithing with console since you don't 
see anything.  Try to change BCSR_ADDR from 0xf4500000 to 0xf80...0 - 
the newer version of the boards may have this changed.


-- 
Sincerely, 
Vitaly


[-- Attachment #2: Type: text/html, Size: 1585 bytes --]