Re: How to setup CONFIG_SCSI_SATA_VIA=y and CONFIG_SK98LIN=y on a custom xenlinux builds?

[Marlon <marlon@mrgnetwork.com.br>]

Hi,

That's the problem, when I run "make ARCH=xen menuconfig ",  the  
drivers  that I need don't  show up,
even select  CONFIG_XEN_PHYSDEV_ACCESS=y .

Regards,

Marlon



Subhabrata Bhattacharya escreveu:

>Hi, 
>
>Once you have done the make world, you would get the directories.Now 
>
>$cd linux-2.6.11-xen0
>$make ARCH=xen menuconfig 
>and set your options there.
>
>Mine worked this way.
>~$ubh
>
>On 8/10/05, Marlon <marlon@mrgnetwork.com.br> wrote:
>  
>
>>Hi,
>>
>>How to setup CONFIG_SCSI_SATA_VIA=y and CONFIG_SK98LIN=y on a custom
>>xenlinux builds?
>>
>>I can't do a custom build of Xen to my hardware.
>>I already copy a custom .config to directory linux-2.6.11-xen0/ , but
>>when run  "make ARCH=xen oldconfig"
>>the options to sata and sk98 drivers don't show up.
>>
>>It's possible to custom the xen0 kernel before to do a "make world" ?
>>The directories above don't show up before to do a "make world":
>>
>>drwxr-xr-x  19 marlon users     1464 2005-08-10 12:52 linux-2.6.11-xen0
>>drwxr-xr-x   7 marlon users      200 2005-08-03 20:57
>>linux-2.6.11-xen-sparse
>>drwxr-xr-x  19 marlon users     1464 2005-08-10 00:12 linux-2.6.11-xenU
>>drwxr-xr-x  18 marlon users      656 2005-08-09 23:54 pristine-linux-2.6.11
>>drwxr-xr-x  18 marlon users      688 2005-08-09 23:54 ref-linux-2.6.11
>>
>>There is another way to do a custom build?
>>Instructions on the section 2.3.3 on Xen users' manual doesn't work for
>>my hardware.
>>
>>Regards,
>>
>>Marlon
>>
>>
>>
>>
>>
>>_______________________________________________
>>Xen-users mailing list
>>Xen-users@lists.xensource.com
>>http://lists.xensource.com/xen-users
>>
>>    
>>
>
>
>  
>