Re: How to setup CONFIG_SCSI_SATA_VIA=y and CONFIG_SK98LIN=y on a custom xenlinux builds?

[Subhabrata Bhattacharya <xions.microcosm@googlemail.com>]

Hi, 

Once you have done the make world, you would get the directories.Now 

$cd linux-2.6.11-xen0
$make ARCH=xen menuconfig 
and set your options there.

Mine worked this way.
~$ubh

On 8/10/05, Marlon <marlon@mrgnetwork.com.br> wrote:
> Hi,
> 
> How to setup CONFIG_SCSI_SATA_VIA=y and CONFIG_SK98LIN=y on a custom
> xenlinux builds?
> 
> I can't do a custom build of Xen to my hardware.
> I already copy a custom .config to directory linux-2.6.11-xen0/ , but
> when run  "make ARCH=xen oldconfig"
> the options to sata and sk98 drivers don't show up.
> 
> It's possible to custom the xen0 kernel before to do a "make world" ?
> The directories above don't show up before to do a "make world":
> 
> drwxr-xr-x  19 marlon users     1464 2005-08-10 12:52 linux-2.6.11-xen0
> drwxr-xr-x   7 marlon users      200 2005-08-03 20:57
> linux-2.6.11-xen-sparse
> drwxr-xr-x  19 marlon users     1464 2005-08-10 00:12 linux-2.6.11-xenU
> drwxr-xr-x  18 marlon users      656 2005-08-09 23:54 pristine-linux-2.6.11
> drwxr-xr-x  18 marlon users      688 2005-08-09 23:54 ref-linux-2.6.11
> 
> There is another way to do a custom build?
> Instructions on the section 2.3.3 on Xen users' manual doesn't work for
> my hardware.
> 
> Regards,
> 
> Marlon
> 
> 
> 
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
>