* PROBLEM: 3ware 9000 controller module panic with 2.6.12.5 kernel
@ 2005-08-18 12:30 Igor Demjanenko
0 siblings, 0 replies; only message in thread
From: Igor Demjanenko @ 2005-08-18 12:30 UTC (permalink / raw)
To: linux-scsi; +Cc: linuxraid
[-- Attachment #1: Type: text/plain, Size: 791 bytes --]
Hello,
I am having a constant problem with getting my 3ware-9xxx controller working stable under 2.6.12.5 kernel on Fedora Core 3, Intel Pentium 4 3.2Ghz with Hyperthreading disabled.
The motherboard is SUPER MICRO P4SCI, there are 15 SATA drives from Western Digital.
I am using the latest 3ware driver from amcc.com (9.2.1 release), 2.6.12.5 kernel compiled with kdb debugger patches.
In attachments I also include some information from kdb (those are screenshots in GIF format) and various TXT attachments which include information from /proc/ioports, /proc/iomem, /proc/scsci/scsi, lspci -vvv output).
Hope this report helps to identify what might be the problem in my case, please ask any additional questions, I will be happy to provide more information.
With best regards,
Igor
[-- Attachment #2: panic_1.gif --]
[-- Type: image/gif, Size: 17978 bytes --]
[-- Attachment #3: panic_2.gif --]
[-- Type: image/gif, Size: 18148 bytes --]
[-- Attachment #4: lspci_vvv.txt --]
[-- Type: text/plain, Size: 8717 bytes --]
00:00.0 Host bridge: Intel Corp. 82875P/E7210 Memory Controller Hub (rev 02)
Subsystem: Super Micro Computer Inc: Unknown device 5180
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [e4] Vendor Specific Information
00:03.0 PCI bridge: Intel Corp. 82875P/E7210 Processor to PCI to CSA Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f3800000-f38fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit PCI-X Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 32, Cache Line Size 10
Bus: primary=00, secondary=02, subordinate=02, sec-latency=48
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f2000000-f37fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] PCI-X bridge device.
Secondary Status: 64bit+, 133MHz-, SCD-, USC-, SCO-, SRD- Freq=0
Status: Bus=0 Dev=28 Func=0 64bit+ 133MHz- SCD- USC-, SCO-, SRD-
: Upstream: Capacity=65535, Commitment Limit=0
: Downstream: Capacity=65535, Commitment Limit=0
00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 0a) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f0000000-f1ffffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66Mhz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.2 IDE interface: Intel Corp. 6300ESB SATA Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Super Micro Computer Inc: Unknown device 5180
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at f000 [size=16]
00:1f.3 SMBus: Intel Corp. 6300ESB SMBus Controller (rev 02)
Subsystem: Super Micro Computer Inc: Unknown device 5180
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 3
Region 4: I/O ports at 0500 [size=32]
01:01.0 Ethernet controller: Intel Corp. 82547GI Gigabit Ethernet Controller
Subsystem: Intel Corp. PRO/1000 CT Network Connection
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (63750ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f3800000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at b000 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
02:01.0 RAID bus controller: 3ware Inc 3ware Inc 3ware 9xxx-series SATA-RAID
Subsystem: 3ware Inc 3ware Inc 3ware 9xxx-series SATA-RAID
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2250ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at f3010000 (64-bit, non-prefetchable) [size=256]
Region 3: Memory at f2000000 (64-bit, prefetchable) [size=8M]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:02.0 RAID bus controller: 3ware Inc 3ware Inc 3ware 9xxx-series SATA-RAID
Subsystem: 3ware Inc 3ware Inc 3ware 9xxx-series SATA-RAID
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2250ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at c100 [size=256]
Region 1: Memory at f3011000 (64-bit, non-prefetchable) [size=256]
Region 3: Memory at f2800000 (64-bit, prefetchable) [size=8M]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:09.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
Subsystem: Super Micro Computer Inc: Unknown device 5180
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at d000 [size=256]
Region 2: Memory at f1040000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:0a.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller
Subsystem: Intel Corp. PRO/1000 MT Network Connection
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63750ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d100 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=2, DMOST=0, DMCRS=0, RSCEM-
[-- Attachment #5: proc_iomem.txt --]
[-- Type: text/plain, Size: 902 bytes --]
00000000-0009efff : System RAM
0009f000-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000ca000-000ca7ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-7feeffff : System RAM
00100000-004568d8 : Kernel code
004568d9-0054f3ff : Kernel data
7fef0000-7fefffff : reserved
e0000000-efffffff : 0000:00:00.0
f0000000-f0ffffff : 0000:03:09.0
f1000000-f101ffff : 0000:03:0a.0
f1000000-f101ffff : e1000
f1040000-f1040fff : 0000:03:09.0
f2000000-f37fffff : PCI Bus #02
f2000000-f27fffff : 0000:02:01.0
f2000000-f27fffff : 3w-9xxx
f2800000-f2ffffff : 0000:02:02.0
f2800000-f2ffffff : 3w-9xxx
f3010000-f30100ff : 0000:02:01.0
f3010000-f30100ff : 3w-9xxx
f3011000-f30110ff : 0000:02:02.0
f3011000-f30110ff : 3w-9xxx
f3800000-f38fffff : PCI Bus #01
f3800000-f381ffff : 0000:01:01.0
f3800000-f381ffff : e1000
fec00000-ffffffff : reserved
[-- Attachment #6: proc_ioports.txt --]
[-- Type: text/plain, Size: 667 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : libata
01f0-01f7 : ide0
03c0-03df : vga+
03f6-03f6 : ide0
0400-047f : 0000:00:1f.0
0480-04bf : 0000:00:1f.0
0500-051f : 0000:00:1f.3
0cf8-0cff : PCI conf1
b000-bfff : PCI Bus #01
b000-b01f : 0000:01:01.0
b000-b01f : e1000
c000-cfff : PCI Bus #02
c000-c0ff : 0000:02:01.0
c000-c0ff : 3w-9xxx
c100-c1ff : 0000:02:02.0
c100-c1ff : 3w-9xxx
d000-d0ff : 0000:03:09.0
d100-d13f : 0000:03:0a.0
d100-d13f : e1000
f000-f00f : 0000:00:1f.2
f000-f00f : libata
[-- Attachment #7: proc_modules.txt --]
[-- Type: text/plain, Size: 681 bytes --]
nfsd 224896 9 - Live 0xf91d3000
lockd 68520 2 nfsd, Live 0xf92d2000
sunrpc 172484 19 nfsd,lockd, Live 0xf9363000
md5 4480 1 - Live 0xf8f30000
ipv6 277248 148 - Live 0xf95ad000
ipt_REJECT 5888 7 - Live 0xf8f27000
iptable_filter 3328 1 - Live 0xf8d31000
ip_tables 20736 2 ipt_REJECT,iptable_filter, Live 0xf8e37000
e1000 105652 0 - Live 0xf8de6000
floppy 66612 0 - Live 0xf8dc1000
ext3 137864 4 - Live 0xf8f02000
jbd 87448 1 ext3, Live 0xf8e02000
dm_mod 61748 29 - Live 0xf8dd5000
3w_9xxx 648196 28 - Live 0xf8e62000
ata_piix 9604 0 - Live 0xf8d2d000
libata 49412 1 ata_piix, Live 0xf8d3d000
sd_mod 20736 14 - Live 0xf8d26000
scsi_mod 151112 3 3w_9xxx,libata,sd_mod, Live 0xf8d4d000
[-- Attachment #8: proc_scsi_scsi.txt --]
[-- Type: text/plain, Size: 2230 bytes --]
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 02 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 03 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 04 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 05 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 06 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 01 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 02 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 03 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 04 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 05 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 06 Lun: 00
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.08
Type: Direct-Access ANSI SCSI revision: 03
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-08-18 12:29 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-08-18 12:30 PROBLEM: 3ware 9000 controller module panic with 2.6.12.5 kernel Igor Demjanenko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.