* mpc8247 restart
@ 2005-08-22 10:54 Mike Rapoport
0 siblings, 0 replies; only message in thread
From: Mike Rapoport @ 2005-08-22 10:54 UTC (permalink / raw)
To: 'linuxppc-embedded@ozlabs.org'
Hi all,
I have a custom board based on mpc8247. I use u-boot-1.1.3 and linux
2.6.12.3. Each time there is some critical exception and the kernel
tries to reset the machine, I get machine check exception instead of
jumping to the u-boot code. What can be a reason of this?
The u-boot is in flash at offset 0x300000 from the flash start, the
flash is mapped to 0xff800000 and I set the BOOTROM_RESTART_ADDR to
0xffb00110.
--
Sincerely yours,
Mike Rapoport
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-08-22 10:13 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-08-22 10:54 mpc8247 restart Mike Rapoport
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.