x86_64 - Unable to boot DomU

x86_64 - Unable to boot DomU

[David F Barrera]

I've built Xen with the latest hg source pull, and I am not able to boot 
domU on my x86_64 boxes using configurations and setups that have 
previously worked. Has something changed since late last week that would 
require a change in my domU configuration file?

When creating DomU, I get the following error message:

VFS: Cannot open root device "sdb2" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on 
unknown-block(0,0)

The file system for DomU is ext3, and I've made sure that it is built in 
xenU kernel.

This are the xm dmesg lines displayed when error occurs:

(XEN) (file=grant_table.c, line=1071) Grant unref rd(5) ld(0) frm(d485) 
flgs(0).
(XEN) (file=traps.c, line=878) Non-priv domain attempted 
RDMSR(00000000c0000080,00020000,00020000).
(XEN) (file=traps.c, line=870) Non-priv domain attempted 
WRMSR(00000000c0000100,00000000,00000000).
(XEN) (file=traps.c, line=870) Non-priv domain attempted 
WRMSR(00000000c0000102,00000000,00000000).
(XEN) (file=traps.c, line=878) Non-priv domain attempted 
RDMSR(00000000c0000080,00000000,00000000).
stop_this_cpu disable_local_apic

This is the domU configuration file:

# Kernel image file.
kernel = "/boot/vmlinuz-2.6-xenU"
# Optional ramdisk.
# ramdisk = "/boot/initrd-2.6.11.12-xenU"
# The domain build function. Default is 'linux'.
builder='linux'
# Initial memory allocation (in megabytes) for the new domain.
# memory = 256
memory = 512
# A name for your domain. All domains must have different names.
name = "vm1"
disk = [ 'phy:sdb1,0811,w','phy:sdb2,0812,w' ]
# Set if you want dhcp to allocate the IP address.
# vif = [ 'mac= AA:00:00:47:CB:34, bridge=xen-br0' ]
# Set if you want dhcp to allocate the IP address.
#dhcp="dhcp"
# Set netmask.
#netmask = '255.255.255.0'
# Set default gateway.
# gateway = '9.53.94.0'
# Set the hostname.
# hostname= "vm%d" % vmid


# Set root device.
root = "/dev/sdb2 ro"
# Sets runlevel 4.
# extra = "4"
#==============

David F Barrera

Re: x86_64 - Unable to boot DomU

[David F Barrera]

So, I am not the only one, then. Thanks for your reply.

David

Robin van Leeuwen wrote:

> I have the same here after last pull
>
>     VFS: Cannot open root device "hda1" or unknown-block(0,0)
>
> only my hda1 maps to a ext3 on a lvm device...
>
> [Debian unstable/testing, last pull 22-08-05 18:00]
>
>
> David F Barrera wrote:
>
>> I've built Xen with the latest hg source pull, and I am not able to 
>> boot domU on my x86_64 boxes using configurations and setups that 
>> have previously worked. Has something changed since late last week 
>> that would require a change in my domU configuration file?
>>
>> When creating DomU, I get the following error message:
>>
>> VFS: Cannot open root device "sdb2" or unknown-block(0,0)
>> Please append a correct "root=" boot option
>> Kernel panic - not syncing: VFS: Unable to mount root fs on 
>> unknown-block(0,0)
>>
>> The file system for DomU is ext3, and I've made sure that it is built 
>> in xenU kernel.
>>
>> This are the xm dmesg lines displayed when error occurs:
>>
>> (XEN) (file=grant_table.c, line=1071) Grant unref rd(5) ld(0) 
>> frm(d485) flgs(0).
>> (XEN) (file=traps.c, line=878) Non-priv domain attempted 
>> RDMSR(00000000c0000080,00020000,00020000).
>> (XEN) (file=traps.c, line=870) Non-priv domain attempted 
>> WRMSR(00000000c0000100,00000000,00000000).
>> (XEN) (file=traps.c, line=870) Non-priv domain attempted 
>> WRMSR(00000000c0000102,00000000,00000000).
>> (XEN) (file=traps.c, line=878) Non-priv domain attempted 
>> RDMSR(00000000c0000080,00000000,00000000).
>> stop_this_cpu disable_local_apic
>>
>> This is the domU configuration file:
>>
>> # Kernel image file.
>> kernel = "/boot/vmlinuz-2.6-xenU"
>> # Optional ramdisk.
>> # ramdisk = "/boot/initrd-2.6.11.12-xenU"
>> # The domain build function. Default is 'linux'.
>> builder='linux'
>> # Initial memory allocation (in megabytes) for the new domain.
>> # memory = 256
>> memory = 512
>> # A name for your domain. All domains must have different names.
>> name = "vm1"
>> disk = [ 'phy:sdb1,0811,w','phy:sdb2,0812,w' ]
>> # Set if you want dhcp to allocate the IP address.
>> # vif = [ 'mac= AA:00:00:47:CB:34, bridge=xen-br0' ]
>> # Set if you want dhcp to allocate the IP address.
>> #dhcp="dhcp"
>> # Set netmask.
>> #netmask = '255.255.255.0'
>> # Set default gateway.
>> # gateway = '9.53.94.0'
>> # Set the hostname.
>> # hostname= "vm%d" % vmid
>>
>>
>> # Set root device.
>> root = "/dev/sdb2 ro"
>> # Sets runlevel 4.
>> # extra = "4"
>> #==============
>>
>> David F Barrera
>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>
>
>
>

RE: x86_64 - Unable to boot DomU

[Puthiyaparambil, Aravindh]

I am also running into the same issue on the ES7000 and Dell x86_64
boxes running SLES9 SP2.

> -----Original Message-----
> From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-
> bounces@lists.xensource.com] On Behalf Of David F Barrera
> Sent: Monday, August 22, 2005 5:23 PM
> To: Robin van Leeuwen
> Cc: xen-devel@lists.xensource.com
> Subject: Re: [Xen-devel] x86_64 - Unable to boot DomU
> 
> So, I am not the only one, then. Thanks for your reply.
> 
> David
> 
> Robin van Leeuwen wrote:
> 
> > I have the same here after last pull
> >
> >     VFS: Cannot open root device "hda1" or unknown-block(0,0)
> >
> > only my hda1 maps to a ext3 on a lvm device...
> >
> > [Debian unstable/testing, last pull 22-08-05 18:00]
> >
> >

Re: x86_64 - Unable to boot DomU

[Robin van Leeuwen]

To make the story more complete:

during the DomU boot it hangs for a while on:

     Blkif frontend is using grant tables.
     xen_blk: Initialising virtual block device driver

And then spits out:

     xen_blk: Timeout connecting to device!


David F Barrera wrote:

> So, I am not the only one, then. Thanks for your reply.
>
> David
>
> Robin van Leeuwen wrote:
>
>> I have the same here after last pull
>>
>>     VFS: Cannot open root device "hda1" or unknown-block(0,0)
>>
>> only my hda1 maps to a ext3 on a lvm device...
>>
>> [Debian unstable/testing, last pull 22-08-05 18:00]
>>
>>
>> David F Barrera wrote:
>>
>>> I've built Xen with the latest hg source pull, and I am not able to 
>>> boot domU on my x86_64 boxes using configurations and setups that 
>>> have previously worked. Has something changed since late last week 
>>> that would require a change in my domU configuration file?
>>>
>>> When creating DomU, I get the following error message:
>>>
>>> VFS: Cannot open root device "sdb2" or unknown-block(0,0)
>>> Please append a correct "root=" boot option
>>> Kernel panic - not syncing: VFS: Unable to mount root fs on 
>>> unknown-block(0,0)
>>>
>>> The file system for DomU is ext3, and I've made sure that it is 
>>> built in xenU kernel.
>>>
>>> This are the xm dmesg lines displayed when error occurs:
>>>
>>> (XEN) (file=grant_table.c, line=1071) Grant unref rd(5) ld(0) 
>>> frm(d485) flgs(0).
>>> (XEN) (file=traps.c, line=878) Non-priv domain attempted 
>>> RDMSR(00000000c0000080,00020000,00020000).
>>> (XEN) (file=traps.c, line=870) Non-priv domain attempted 
>>> WRMSR(00000000c0000100,00000000,00000000).
>>> (XEN) (file=traps.c, line=870) Non-priv domain attempted 
>>> WRMSR(00000000c0000102,00000000,00000000).
>>> (XEN) (file=traps.c, line=878) Non-priv domain attempted 
>>> RDMSR(00000000c0000080,00000000,00000000).
>>> stop_this_cpu disable_local_apic
>>>
>>> This is the domU configuration file:
>>>
>>> # Kernel image file.
>>> kernel = "/boot/vmlinuz-2.6-xenU"
>>> # Optional ramdisk.
>>> # ramdisk = "/boot/initrd-2.6.11.12-xenU"
>>> # The domain build function. Default is 'linux'.
>>> builder='linux'
>>> # Initial memory allocation (in megabytes) for the new domain.
>>> # memory = 256
>>> memory = 512
>>> # A name for your domain. All domains must have different names.
>>> name = "vm1"
>>> disk = [ 'phy:sdb1,0811,w','phy:sdb2,0812,w' ]
>>> # Set if you want dhcp to allocate the IP address.
>>> # vif = [ 'mac= AA:00:00:47:CB:34, bridge=xen-br0' ]
>>> # Set if you want dhcp to allocate the IP address.
>>> #dhcp="dhcp"
>>> # Set netmask.
>>> #netmask = '255.255.255.0'
>>> # Set default gateway.
>>> # gateway = '9.53.94.0'
>>> # Set the hostname.
>>> # hostname= "vm%d" % vmid
>>>
>>>
>>> # Set root device.
>>> root = "/dev/sdb2 ro"
>>> # Sets runlevel 4.
>>> # extra = "4"
>>> #==============
>>>
>>> David F Barrera
>>>
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>
>>
>>
>>
>>
>

Re: x86_64 - Unable to boot DomU

[David F Barrera]

I tested again this morning (8/23) using the following changeset, with the same results:

changeset:   6328:b0d820178b8109f2d081e50920aac2c6b8273af6
tag:         tip
user:        kaf24@firebug.cl.cam.ac.uk <mailto:kaf24@firebug.cl.cam.ac.uk>
date:        Tue Aug 23 04:49:12 2005
summary:     This patch extends I/O APIC guest writes so that the correct
destination

Bugzilla # 176. (http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=176)

This is what is displayed on the serial console from the time that Dom0 comes up
until I tried to create DomU.

EXT3-fs: mounted filesystem with ordered data mode.
store_evtchn = 14
XENBUS xs_read_watch: 0
(XEN) (file=traps.c, line=878) Non-priv domain attempted
RDMSR(00000000c0000080,00020000,00020000).
(XEN) (file=traps.c, line=870) Non-priv domain attempted
WRMSR(00000000c0000100,00000000,00000000).
(XEN) (file=traps.c, line=870) Non-priv domain attempted
WRMSR(00000000c0000102,00000000,00000000).
(XEN) (file=traps.c, line=878) Non-priv domain attempted
RDMSR(00000000c0000080,00000000,00000000).
stop_this_cpu disable_local_APIC
(XEN) (file=grant_table.c, line=526) Bad handle (0).
(XEN) (file=grant_table.c, line=1071) Grant unref rd(1) ld(0) frm(d4a2) flgs(0).


This is the entire domU boot log:

Started domain vm1
Linux version 2.6.12-xenU (root@bl2-10.ltc.austin.ibm.com <mailto:root@bl2-10.ltc.austin.ibm.com>) (gcc version 4.0.0
20050405 (Red Hat 4.0.0-0.40)) #1 SMP Tue Aug 23 08:23:02 CDT 2005
kernel direct mapping tables upto ffff880020000000 @ 800000-902000
Allocating PCI resources starting at 20000000 (gap: 20000000:e0000000)
Built 1 zonelists
Kernel command line:  root=/dev/sdb2 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
Xen reported: 3600.120 MHz processor.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 504576k/524288k available (1574k kernel code, 9172k reserved, 528k data,
136k init)
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 3
Brought up 1 CPUs
WARNING: 1 siblings found for CPU0, should be 2
NET: Registered protocol family 16
xen_mem: Initialising balloon driver.
Grant table initialized
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1124805941.510:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Xen virtual console successfully installed as tty1
Event-channel device installed.
xen_blk: Initialising virtual block device driver
xen_blk: Timeout connecting to device!
Netdev frontend (TX) is using grant tables.
Netdev frontend (RX) is using grant tables.
xen_net: Initialising virtual ethernet driver.
&#65533;&#65533;&#65533;Bmd: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
VFS: Cannot open root device "sdb2" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)




Robin van Leeuwen wrote:

> To make the story more complete:
>
> during the DomU boot it hangs for a while on:
>
>     Blkif frontend is using grant tables.
>     xen_blk: Initialising virtual block device driver
>
> And then spits out:
>
>     xen_blk: Timeout connecting to device!
>
>
> David F Barrera wrote:
>
>> So, I am not the only one, then. Thanks for your reply.
>>
>> David
>>
>> Robin van Leeuwen wrote:
>>
>>> I have the same here after last pull
>>>
>>>     VFS: Cannot open root device "hda1" or unknown-block(0,0)
>>>
>>> only my hda1 maps to a ext3 on a lvm device...
>>>
>>> [Debian unstable/testing, last pull 22-08-05 18:00]
>>>
>>>
>>> David F Barrera wrote:
>>>
>>>> I've built Xen with the latest hg source pull, and I am not able to 
>>>> boot domU on my x86_64 boxes using configurations and setups that 
>>>> have previously worked. Has something changed since late last week 
>>>> that would require a change in my domU configuration file?
>>>>
>>>> When creating DomU, I get the following error message:
>>>>
>>>> VFS: Cannot open root device "sdb2" or unknown-block(0,0)
>>>> Please append a correct "root=" boot option
>>>> Kernel panic - not syncing: VFS: Unable to mount root fs on 
>>>> unknown-block(0,0)
>>>>
>>>> The file system for DomU is ext3, and I've made sure that it is 
>>>> built in xenU kernel.
>>>>
>>>> This are the xm dmesg lines displayed when error occurs:
>>>>
>>>> (XEN) (file=grant_table.c, line=1071) Grant unref rd(5) ld(0) 
>>>> frm(d485) flgs(0).
>>>> (XEN) (file=traps.c, line=878) Non-priv domain attempted 
>>>> RDMSR(00000000c0000080,00020000,00020000).
>>>> (XEN) (file=traps.c, line=870) Non-priv domain attempted 
>>>> WRMSR(00000000c0000100,00000000,00000000).
>>>> (XEN) (file=traps.c, line=870) Non-priv domain attempted 
>>>> WRMSR(00000000c0000102,00000000,00000000).
>>>> (XEN) (file=traps.c, line=878) Non-priv domain attempted 
>>>> RDMSR(00000000c0000080,00000000,00000000).
>>>> stop_this_cpu disable_local_apic
>>>>
>>>> This is the domU configuration file:
>>>>
>>>> # Kernel image file.
>>>> kernel = "/boot/vmlinuz-2.6-xenU"
>>>> # Optional ramdisk.
>>>> # ramdisk = "/boot/initrd-2.6.11.12-xenU"
>>>> # The domain build function. Default is 'linux'.
>>>> builder='linux'
>>>> # Initial memory allocation (in megabytes) for the new domain.
>>>> # memory = 256
>>>> memory = 512
>>>> # A name for your domain. All domains must have different names.
>>>> name = "vm1"
>>>> disk = [ 'phy:sdb1,0811,w','phy:sdb2,0812,w' ]
>>>> # Set if you want dhcp to allocate the IP address.
>>>> # vif = [ 'mac= AA:00:00:47:CB:34, bridge=xen-br0' ]
>>>> # Set if you want dhcp to allocate the IP address.
>>>> #dhcp="dhcp"
>>>> # Set netmask.
>>>> #netmask = '255.255.255.0'
>>>> # Set default gateway.
>>>> # gateway = '9.53.94.0'
>>>> # Set the hostname.
>>>> # hostname= "vm%d" % vmid
>>>>
>>>>
>>>> # Set root device.
>>>> root = "/dev/sdb2 ro"
>>>> # Sets runlevel 4.
>>>> # extra = "4"
>>>> #==============
>>>>
>>>> David F Barrera
>>>>
>>>>
>>>> _______________________________________________
>>>> Xen-devel mailing list
>>>> Xen-devel@lists.xensource.com
>>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>>
>>>
>>>
>>>
>>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>