Problem with MMC card reader

Problem with MMC card reader

[ScytheBlade1]

I recently purchased:

http://www.mitsumi.com/products/FA404.htm

I've enabled everything needed...the CF port works flawlessly. However,
the SD slot does *not*. I've got about 5+ pages worth of dmesg output
related to this (MMC is NOT debug enabled, and I still get a disturbing
amount of output). Would here be the best place to post this, or would a
different list be better? (Recommendations as to which list are welcomed
:)).

Re: Problem with MMC card reader

[Vid Strpic]

[-- Attachment #1.1: Type: text/plain, Size: 995 bytes --]

On Mon, Aug 22, 2005 at 11:16:46PM -0600, ScytheBlade1 wrote:
> I've enabled everything needed...the CF port works flawlessly. However,
> the SD slot does *not*. I've got about 5+ pages worth of dmesg output
> related to this (MMC is NOT debug enabled, and I still get a disturbing
> amount of output). Would here be the best place to post this, or would a
> different list be better? (Recommendations as to which list are welcomed
> :)).

CONFIG_SCSI_MULTI_LUN=y

This is probably the answer you needed... because, the reader is a
single device, with multiple slots, and usb_storage driver uses SCSI
infrastructure, so multiple slots map to multiple SCSI LUN's.

Atleast, it worked for all my readers during the years :))

-- 
           vms@bofhlet.net, IRC:*@Martin, /bin/zsh. C|N>K
Linux moria 2.6.11 #1 Wed Mar 9 19:08:59 CET 2005 i686
 11:23:27 up 27 days,  3:56,  4 users,  load average: 0.11, 0.23, 0.29
We are Microsoft. First we'll reboot, and then asimilate you.

[-- Attachment #1.2: Type: application/pgp-signature, Size: 189 bytes --]

[-- Attachment #2: sanitizer.log --]
[-- Type: text/sanitizer-log, Size: 349 bytes --]

This message has been 'sanitized'.  This means that potentially
dangerous content has been rewritten or removed.  The following
log describes which actions were taken.

Sanitizer (start="1124789169"):
  Forcing message to be multipart/mixed, to facilitate logging.


Anomy 0.0.0 : Sanitizer.pm
$Id: Sanitizer.pm,v 1.87 2004/05/07 17:42:12 bre Exp $

Re: Problem with MMC card reader

[Russell King]

On Mon, Aug 22, 2005 at 11:16:46PM -0600, ScytheBlade1 wrote:
> I've enabled everything needed...the CF port works flawlessly. However,
> the SD slot does *not*. I've got about 5+ pages worth of dmesg output
> related to this (MMC is NOT debug enabled, and I still get a disturbing
> amount of output). Would here be the best place to post this, or would a
> different list be better?

Since it seems to be a USB device, the USB mailing list could be an
appropriate place.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 Serial core