From: Luca Pizzamiglio <pizzamiglio@cefriel.it>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] cannot connect to i-mate SP3 using belkin usb bluetooth adapter and Linux 2.6
Date: Thu, 01 Sep 2005 15:43:42 +0200 [thread overview]
Message-ID: <4317058E.2030803@cefriel.it> (raw)
In-Reply-To: <200508132210.45161.genoni@sns.it>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi. I'm using an i-mate sp3 to develop a sort of HF profile and I've
seen the same problem.
i-mate sp3 change rfcomm channels at every reboot, so you must search
the right rfcomm channel with the command:
sdptool search DUN.
Cheers,
Pizza
Luigi Genoni wrote:
> Hi,
> recently I change my èhone fro nokia 6310i to i-mate sp3 (OS version
> 1.5.33.11).
> Since I changed it I cannot connect to the phone with my linux laptop
> to use the phoen a gprs modem.
>
> everything worked fine with nokia 6310, but
> when I try to access to rfcomm0 (I do rfcomm bind 0 xx:xx:xx:xx:xx 1)
> with kpp all I get not is a (modem is budy).
> this is the hcidump -X output
>
> BlackDeath:{root}:~>hcidump -X
> HCI sniffer - Bluetooth packet analyzer ver 1.23
> device: hci0 snap_len: 1028 filter: 0xffffffff
> < HCI Command: Create Connection (0x01|0x0005) plen 13
> 0000: 0b b6 06 2d 09 00 18 cc 02 00 00 00 01 ...-.........
>
>>HCI Event: Command Status (0x0f) plen 4
>
> 0000: 00 01 05 04 ....
>
>>HCI Event: Connect Complete (0x03) plen 11
>
> 0000: 00 06 00 0b b6 06 2d 09 00 01 00 ......-....
> < ACL data: handle 6 flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 3 scid 0x0040
> < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> 0000: 06 00 0f 00 ....
>
>>HCI Event: Command Complete (0x0e) plen 6
>
> 0000: 01 0d 08 00 06 00 ......
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 01 00 .....
>
>>HCI Event: Max Slots Change (0x1b) plen 3
>
> 0000: 06 00 05 ...
>
>>ACL data: handle 6 flags 0x02 dlen 16
>
> L2CAP(s): Connect rsp: dcid 0x014b scid 0x0040 result 0 status 0
> Connection successful
> < ACL data: handle 6 flags 0x02 dlen 16
> L2CAP(s): Config req: dcid 0x014b flags 0x00 clen 4
> MTU 1024
>
>>ACL data: handle 6 flags 0x02 dlen 12
>
> L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> < ACL data: handle 6 flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x014b flags 0x00 result 0 clen 0
> Success
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 02 00 .....
>
>>ACL data: handle 6 flags 0x02 dlen 14
>
> L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
> Success
> < ACL data: handle 6 flags 0x02 dlen 8
> L2CAP(d): cid 0x014b len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 01 00 .....
>
>>ACL data: handle 6 flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> < ACL data: handle 6 flags 0x02 dlen 18
> L2CAP(d): cid 0x014b len 14 [psm 3]
> RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
> dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
> frame_size 667 max_retrans 0 credits 7
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 01 00 .....
>
>>ACL data: handle 6 flags 0x02 dlen 17
>>ACL data: handle 6 flags 0x01 dlen 1
>
> L2CAP(d): cid 0x0040 len 14 [psm 3]
> RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
> dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
> frame_size 667 max_retrans 0 credits 7
> < ACL data: handle 6 flags 0x02 dlen 8
> L2CAP(d): cid 0x014b len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 01 00 .....
>
>>HCI Event: PIN Code Request (0x16) plen 6
>
> 0000: 0b b6 06 2d 09 00 ...-..
> < ACL data: handle 6 flags 0x02 dlen 8
> L2CAP(d): cid 0x014b len 4 [psm 3]
> RFCOMM(s): DISC: cr 1 dlci 2 pf 1 ilen 0 fcs 0xb8
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 01 00 .....
>
>>ACL data: handle 6 flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
> < ACL data: handle 6 flags 0x02 dlen 8
> L2CAP(d): cid 0x014b len 4 [psm 3]
> RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
> < ACL data: handle 6 flags 0x02 dlen 12
> L2CAP(s): Disconn req: dcid 0x014b scid 0x0040
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 02 00 .....
>
>>ACL data: handle 6 flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
>
>>ACL data: handle 6 flags 0x02 dlen 12
>
> L2CAP(s): Disconn rsp: dcid 0x014b scid 0x0040
> < HCI Command: Disconnect (0x01|0x0006) plen 3
> 0000: 06 00 13 ...
>
>>HCI Event: Command Status (0x0f) plen 4
>
> 0000: 00 01 06 04 ....
>
>>HCI Event: Disconn Complete (0x05) plen 4
>
> 0000: 00 06 00 16 ....
>
> some idea?
>
> bests
>
> Luigi Genoni
- -------------------------------------------
Luca Pizzamiglio
CEFRIEL - Embedded Systems Design Unit
Via Fucini, 2 - 20133 MILANO (ITALY)
Phone: +39 02 23954 343
e-mail: pizzamiglio@cefriel.it
ICQ: 5046978
- -------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.7 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFDFwWOAoUy56ORfbERAj/ZAJ4zNjLVvvE17dmJk1pUB3prz303XwCffZ7R
XeXes4R0LNSKJq+th8HLWZY=
=77k7
-----END PGP SIGNATURE-----
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
prev parent reply other threads:[~2005-09-01 13:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-13 20:10 [Bluez-devel] cannot connect to i-mate SP3 using belkin usb bluetooth adapter and Linux 2.6 Luigi Genoni
2005-09-01 13:43 ` Luca Pizzamiglio [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4317058E.2030803@cefriel.it \
--to=pizzamiglio@cefriel.it \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.