* [Bluez-devel] cannot connect to i-mate SP3 using belkin usb bluetooth adapter and Linux 2.6
@ 2005-08-13 20:10 Luigi Genoni
2005-09-01 13:43 ` [Bluez-users] " Luca Pizzamiglio
0 siblings, 1 reply; 2+ messages in thread
From: Luigi Genoni @ 2005-08-13 20:10 UTC (permalink / raw)
To: bluez-devel, bluez-users
Hi,
recently I change my =E8hone fro nokia 6310i to i-mate sp3 (OS version=20
1.5.33.11).
Since I changed it I cannot connect to the phone with my linux laptop
to use the phoen a gprs modem.
everything worked fine with nokia 6310, but=20
when I try to access to rfcomm0 (I do rfcomm bind 0 xx:xx:xx:xx:xx 1)
with kpp all I get not is a (modem is budy).
this is the hcidump -X output
BlackDeath:{root}:~>hcidump -X
HCI sniffer - Bluetooth packet analyzer ver 1.23
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
0000: 0b b6 06 2d 09 00 18 cc 02 00 00 00 01 ...-.........
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 05 04 ....
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 06 00 0b b6 06 2d 09 00 01 00 ......-....
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
0000: 06 00 0f 00 ....
> HCI Event: Command Complete (0x0e) plen 6
0000: 01 0d 08 00 06 00 ......
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 06 00 01 00 .....
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 06 00 05 ...
> ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x014b scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x014b flags 0x00 clen 4
MTU 1024
> ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
< ACL data: handle 6 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x014b flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 06 00 02 00 .....
> ACL data: handle 6 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
< ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x014b len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 06 00 01 00 .....
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 6 flags 0x02 dlen 18
L2CAP(d): cid 0x014b len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 667 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 06 00 01 00 .....
> ACL data: handle 6 flags 0x02 dlen 17
> ACL data: handle 6 flags 0x01 dlen 1
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 667 max_retrans 0 credits 7
< ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x014b len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 06 00 01 00 .....
> HCI Event: PIN Code Request (0x16) plen 6
0000: 0b b6 06 2d 09 00 ...-..
< ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x014b len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 2 pf 1 ilen 0 fcs 0xb8
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 06 00 01 00 .....
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x014b len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x014b scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 06 00 02 00 .....
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x014b scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
0000: 06 00 13 ...
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 06 04 ....
> HCI Event: Disconn Complete (0x05) plen 4
0000: 00 06 00 16 ....
some idea?
bests
Luigi Genoni
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [Bluez-users] cannot connect to i-mate SP3 using belkin usb bluetooth adapter and Linux 2.6
2005-08-13 20:10 [Bluez-devel] cannot connect to i-mate SP3 using belkin usb bluetooth adapter and Linux 2.6 Luigi Genoni
@ 2005-09-01 13:43 ` Luca Pizzamiglio
0 siblings, 0 replies; 2+ messages in thread
From: Luca Pizzamiglio @ 2005-09-01 13:43 UTC (permalink / raw)
To: bluez-users
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi. I'm using an i-mate sp3 to develop a sort of HF profile and I've
seen the same problem.
i-mate sp3 change rfcomm channels at every reboot, so you must search
the right rfcomm channel with the command:
sdptool search DUN.
Cheers,
Pizza
Luigi Genoni wrote:
> Hi,
> recently I change my èhone fro nokia 6310i to i-mate sp3 (OS version
> 1.5.33.11).
> Since I changed it I cannot connect to the phone with my linux laptop
> to use the phoen a gprs modem.
>
> everything worked fine with nokia 6310, but
> when I try to access to rfcomm0 (I do rfcomm bind 0 xx:xx:xx:xx:xx 1)
> with kpp all I get not is a (modem is budy).
> this is the hcidump -X output
>
> BlackDeath:{root}:~>hcidump -X
> HCI sniffer - Bluetooth packet analyzer ver 1.23
> device: hci0 snap_len: 1028 filter: 0xffffffff
> < HCI Command: Create Connection (0x01|0x0005) plen 13
> 0000: 0b b6 06 2d 09 00 18 cc 02 00 00 00 01 ...-.........
>
>>HCI Event: Command Status (0x0f) plen 4
>
> 0000: 00 01 05 04 ....
>
>>HCI Event: Connect Complete (0x03) plen 11
>
> 0000: 00 06 00 0b b6 06 2d 09 00 01 00 ......-....
> < ACL data: handle 6 flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 3 scid 0x0040
> < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> 0000: 06 00 0f 00 ....
>
>>HCI Event: Command Complete (0x0e) plen 6
>
> 0000: 01 0d 08 00 06 00 ......
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 01 00 .....
>
>>HCI Event: Max Slots Change (0x1b) plen 3
>
> 0000: 06 00 05 ...
>
>>ACL data: handle 6 flags 0x02 dlen 16
>
> L2CAP(s): Connect rsp: dcid 0x014b scid 0x0040 result 0 status 0
> Connection successful
> < ACL data: handle 6 flags 0x02 dlen 16
> L2CAP(s): Config req: dcid 0x014b flags 0x00 clen 4
> MTU 1024
>
>>ACL data: handle 6 flags 0x02 dlen 12
>
> L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> < ACL data: handle 6 flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x014b flags 0x00 result 0 clen 0
> Success
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 02 00 .....
>
>>ACL data: handle 6 flags 0x02 dlen 14
>
> L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
> Success
> < ACL data: handle 6 flags 0x02 dlen 8
> L2CAP(d): cid 0x014b len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 01 00 .....
>
>>ACL data: handle 6 flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> < ACL data: handle 6 flags 0x02 dlen 18
> L2CAP(d): cid 0x014b len 14 [psm 3]
> RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
> dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
> frame_size 667 max_retrans 0 credits 7
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 01 00 .....
>
>>ACL data: handle 6 flags 0x02 dlen 17
>>ACL data: handle 6 flags 0x01 dlen 1
>
> L2CAP(d): cid 0x0040 len 14 [psm 3]
> RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
> dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
> frame_size 667 max_retrans 0 credits 7
> < ACL data: handle 6 flags 0x02 dlen 8
> L2CAP(d): cid 0x014b len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 01 00 .....
>
>>HCI Event: PIN Code Request (0x16) plen 6
>
> 0000: 0b b6 06 2d 09 00 ...-..
> < ACL data: handle 6 flags 0x02 dlen 8
> L2CAP(d): cid 0x014b len 4 [psm 3]
> RFCOMM(s): DISC: cr 1 dlci 2 pf 1 ilen 0 fcs 0xb8
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 01 00 .....
>
>>ACL data: handle 6 flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
> < ACL data: handle 6 flags 0x02 dlen 8
> L2CAP(d): cid 0x014b len 4 [psm 3]
> RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
> < ACL data: handle 6 flags 0x02 dlen 12
> L2CAP(s): Disconn req: dcid 0x014b scid 0x0040
>
>>HCI Event: Number of Completed Packets (0x13) plen 5
>
> 0000: 01 06 00 02 00 .....
>
>>ACL data: handle 6 flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
>
>>ACL data: handle 6 flags 0x02 dlen 12
>
> L2CAP(s): Disconn rsp: dcid 0x014b scid 0x0040
> < HCI Command: Disconnect (0x01|0x0006) plen 3
> 0000: 06 00 13 ...
>
>>HCI Event: Command Status (0x0f) plen 4
>
> 0000: 00 01 06 04 ....
>
>>HCI Event: Disconn Complete (0x05) plen 4
>
> 0000: 00 06 00 16 ....
>
> some idea?
>
> bests
>
> Luigi Genoni
- -------------------------------------------
Luca Pizzamiglio
CEFRIEL - Embedded Systems Design Unit
Via Fucini, 2 - 20133 MILANO (ITALY)
Phone: +39 02 23954 343
e-mail: pizzamiglio@cefriel.it
ICQ: 5046978
- -------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.7 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFDFwWOAoUy56ORfbERAj/ZAJ4zNjLVvvE17dmJk1pUB3prz303XwCffZ7R
XeXes4R0LNSKJq+th8HLWZY=
=77k7
-----END PGP SIGNATURE-----
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-09-01 13:43 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-08-13 20:10 [Bluez-devel] cannot connect to i-mate SP3 using belkin usb bluetooth adapter and Linux 2.6 Luigi Genoni
2005-09-01 13:43 ` [Bluez-users] " Luca Pizzamiglio
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.