From: Michael Thonke <iogl64nx@gmail.com>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.13-mm2
Date: Thu, 08 Sep 2005 19:20:05 +0200 [thread overview]
Message-ID: <432072C5.8020200@gmail.com> (raw)
In-Reply-To: <20050908053042.6e05882f.akpm@osdl.org>
Hello Andrew,
I found a problem regarding to multi device support (Linux software Raid).
The problem first appears now in 2.6.13-mm2, that the kernel didn't initialize the md devices.
2.6.13-mm1 works very well, and everything is okay.
Also one strange thing I found was that my SATA devices were initialized a-sync/disordered e.g
SATA1 with one hdd then something like USB and IPv4 and such and at least SATA3: with 2nd hdd.
That I've never seen this order init order before. Seems to be mixed all around.
I tried irqpoll,pci=routeirq with no success.
I can't provide some logs, because I can't grep the dmesg since it doesn't boot.
There are changes in libata driver for sata_nv? Or md driver changes that cause that?
Thanks
Best regards
--
Michael Thonke
next prev parent reply other threads:[~2005-09-08 17:20 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-08 12:30 2.6.13-mm2 Andrew Morton
2005-09-08 13:12 ` 2.6.13-mm2 Benoit Boissinot
2005-09-08 13:48 ` 2.6.13-mm2 Christoph Hellwig
2005-09-08 14:30 ` 2.6.13-mm2 Martin J. Bligh
2005-09-09 0:39 ` 2.6.13-mm2 Andi Kleen
2005-09-09 10:41 ` 2.6.13-mm2 Andrew Morton
2005-09-09 10:46 ` 2.6.13-mm2 Andi Kleen
2005-09-08 15:11 ` 2.6.13-mm2 high memory support borken? Michal Piotrowski
2005-09-09 9:29 ` Andrew Morton
2005-09-08 17:20 ` Michael Thonke [this message]
2005-09-08 19:39 ` 2.6.13-mm2 Andrew Morton
2005-09-10 7:02 ` 2.6.13-mm2 Michael Thonke
2005-09-09 1:47 ` 2.6.13-mm2 Grant Coady
2005-09-09 9:43 ` 2.6.13-mm2 Andrew Morton
2005-09-09 13:45 ` 2.6.13-mm2 Grant Coady
2005-09-10 6:33 ` 2.6.13-mm2 Marko Kohtala
2005-09-09 2:52 ` 2.6.13-mm2 - drivers/char/speakup/speakup doesn't compile (+warnings from other things) Damir Perisa
2005-09-09 12:18 ` Alan Cox
2005-09-09 20:57 ` 2.6.13-mm2 (general protection fault) Dominik Karall
2005-09-10 11:45 ` 2.6.13-mm2 Manuel Lauss
2005-09-10 12:42 ` 2.6.13-mm2 Antonino A. Daplas
2005-09-10 13:46 ` 2.6.13-mm2 Manuel Lauss
2005-09-10 20:21 ` 2.6.13-mm2 Antonino A. Daplas
2005-09-10 21:26 ` 2.6.13-mm2 Antonino A. Daplas
2005-09-10 18:43 ` 2.6.13-mm2 Dominik Karall
2005-09-10 22:12 ` 2.6.13-mm2 Andrew Morton
2005-09-10 23:46 ` 2.6.13-mm2 J.A. Magallon
2005-09-10 23:56 ` 2.6.13-mm2 Andrew Morton
2005-09-11 0:07 ` 2.6.13-mm2 Patrick McHardy
2005-09-11 0:49 ` 2.6.13-mm2 J.A. Magallon
2005-09-11 0:58 ` 2.6.13-mm2 J.A. Magallon
2005-09-11 1:03 ` 2.6.13-mm2 Patrick McHardy
2005-09-11 1:22 ` 2.6.13-mm2 J.A. Magallon
2005-09-11 1:25 ` 2.6.13-mm2 Patrick McHardy
2005-09-11 17:03 ` 2.6.13-mm2 Rafael J. Wysocki
2005-09-11 19:36 ` 2.6.13-mm2 Andrew Morton
2005-09-11 20:03 ` 2.6.13-mm2 Hugh Dickins
2005-09-12 19:19 ` 2.6.13-mm2 Rafael J. Wysocki
2005-09-11 20:08 ` 2.6.13-mm2 Daniel Ritz
2005-09-12 10:04 ` 2.6.13-mm2 Rafael J. Wysocki
2005-09-12 10:06 ` 2.6.13-mm2 Rafael J. Wysocki
2005-09-12 10:09 ` 2.6.13-mm2 Rafael J. Wysocki
2005-09-18 21:49 ` 2.6.13-mm2 Daniel Ritz
2005-09-19 3:07 ` 2.6.13-mm2 Hugh Dickins
2005-09-19 15:56 ` 2.6.13-mm2 Daniel Ritz
2005-09-23 16:52 ` 2.6.13-mm2 Rafael J. Wysocki
2005-09-28 20:05 ` 2.6.13-mm2 Daniel Ritz
2005-09-28 20:23 ` [linux-usb-devel] 2.6.13-mm2 David Brownell
2005-09-28 20:37 ` Rafael J. Wysocki
2005-09-28 20:56 ` David Brownell
2005-09-28 21:34 ` Rafael J. Wysocki
2005-09-28 22:04 ` David Brownell
2005-09-28 22:32 ` Daniel Ritz
2005-09-29 0:09 ` David Brownell
2005-09-29 15:36 ` Linus Torvalds
2005-09-29 16:31 ` David Brownell
2005-09-29 19:39 ` Daniel Ritz
2005-09-30 16:33 ` Linus Torvalds
2005-09-30 17:48 ` David Brownell
2005-09-29 2:54 ` Alan Stern
2005-09-28 20:45 ` Daniel Ritz
2005-09-28 21:07 ` David Brownell
2005-09-28 21:47 ` Rafael J. Wysocki
2005-09-28 22:07 ` Daniel Ritz
2005-09-28 21:10 ` Alan Stern
2005-09-29 15:22 ` 2.6.13-mm2 Linus Torvalds
2005-09-12 3:07 ` 2.6.13-mm2 Martin J. Bligh
2005-09-12 5:01 ` 2.6.13-mm2 Andi Kleen
2005-09-12 6:09 ` 2.6.13-mm2 Martin J. Bligh
2005-09-12 7:16 ` 2.6.13-mm2 Andi Kleen
2005-09-12 18:06 ` 2.6.13-mm2 Martin J. Bligh
2005-09-12 18:19 ` 2.6.13-mm2 Dave Hansen
2005-09-12 18:51 ` 2.6.13-mm2 Andi Kleen
2005-09-12 22:46 ` 2.6.13-mm2 Martin J. Bligh
2005-09-13 0:08 ` 2.6.13-mm2 Andrew Morton
2005-09-13 4:00 ` 2.6.13-mm2 Martin J. Bligh
2005-09-12 3:10 ` 2.6.13-mm2 Martin J. Bligh
[not found] <4KtRD-7Nt-13@gated-at.bofh.it>
2005-09-08 23:23 ` 2.6.13-mm2 Ronny V. Vindenes
2005-09-08 23:34 ` 2.6.13-mm2 Andrew Morton
2005-09-09 0:26 ` 2.6.13-mm2 Parag Warudkar
2005-09-09 0:55 ` 2.6.13-mm2 Roland McGrath
-- strict thread matches above, loose matches on Subject: below --
2005-09-17 0:36 2.6.13-mm2 Chuck Ebbert
2005-09-17 4:17 ` 2.6.13-mm2 Parag Warudkar
2005-09-17 4:30 ` 2.6.13-mm2 Parag Warudkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=432072C5.8020200@gmail.com \
--to=iogl64nx@gmail.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.