* Re: Problem: ICH6 SATA + ACPI resume
[not found] <8ce7994605091319243ea4156c@mail.gmail.com>
@ 2005-09-14 12:55 ` Jeff Garzik
0 siblings, 0 replies; only message in thread
From: Jeff Garzik @ 2005-09-14 12:55 UTC (permalink / raw)
To: fiorix; +Cc: linux-ide
Alexandre Fiori wrote:
> Hello,
>
> I'm facing a weird problem with SATA and ACPI. I was using linux
> 2.6.12.5 <http://2.6.12.5> and now 2.6.13.1 <http://2.6.13.1>, and the
> problem persists.
> If I use the ATA "Generic PCI IDE" or even "Intel PIIXn" the harddisk is
> very slow but I can suspend and resume, everything works fine - although
> it is very slow.
> Now I disabled ATA support and changed to the SCSI "Serial ATA/Intel
> PIIX/ICH SATA". The disk performance increased from 2 to 35MB/sec and I
> still can do the ACPI suspend (now via echo -n mem > /sys/power/state),
> but when I resume I get a lot of errors from the driver on the console.
Suspend/resume is not supported yet, in libata.
Jeff
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-09-14 12:55 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <8ce7994605091319243ea4156c@mail.gmail.com>
2005-09-14 12:55 ` Problem: ICH6 SATA + ACPI resume Jeff Garzik
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.