* marvell 8 port sata 2.6.14-rc1 problems MV88SX6081
@ 2005-09-14 18:10 Mr. Berkley Shands
0 siblings, 0 replies; only message in thread
From: Mr. Berkley Shands @ 2005-09-14 18:10 UTC (permalink / raw)
To: russb; +Cc: linux-scsi
I have been using the hptmv6 sata module provided by highpoint-tech for
their
rocketraid-2220 sata controller. works fine on 2.6.9 and 2.6.10, runs
slow as a dog under 2.6.13.
So seeing "native" support in 2.6.14-rc1 I thought I could use some
abuse :-)
I have a sun 2100Z motherboard, Centos 4.1 x86_64 and an existing farm of
sata controllers/drives.
/AMD/fedora-2.6.14-rc1> lspci
00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07)
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03)
00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02)
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
00:07.5 Multimedia audio controller: Advanced Micro Devices [AMD]
AMD-8111 AC97 Audio (rev 03)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
(rev 12)
00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
(rev 12)
00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
01:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
01:02.0 Class 0106: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid]
Serial ATA Controller (rev 01)
01:03.0 USB Controller: NEC Corporation USB (rev 43)
01:03.1 USB Controller: NEC Corporation USB (rev 43)
01:03.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
02:01.0 SCSI storage controller: Marvell Technology Group Ltd.
MV88SX6081 8-port SATA II PCI-X Controller (rev 07)
03:01.0 SCSI storage controller: Marvell Technology Group Ltd.
MV88SX6081 8-port SATA II PCI-X Controller (rev 07)
03:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X
Gigabit Ethernet (rev 02)
08:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-8151 System
Controller (rev 14)
08:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge
(rev 14)
08:03.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
(rev 12)
08:03.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
08:04.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
(rev 12)
08:04.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
09:00.0 VGA compatible controller: nVidia Corporation NV18GL [Quadro4
NVS AGP 8x] (rev c1)
0e:01.0 SCSI storage controller: Marvell Technology Group Ltd.
MV88SX6081 8-port SATA II PCI-X Controller (rev 07)
13:03.0 Co-processor: Xilinx Corporation: Unknown device 1000 (rev 01)
13:04.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10)
13:04.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10)
On /sbin/modprobe sata_mv, I get
Sep 14 12:55:00 exegysatademo01 syslogd 1.4.1: restart.
Sep 14 12:55:02 exegysatademo01 crond(pam_unix)[4280]: session opened
for user root by (uid=0)
Sep 14 12:55:02 exegysatademo01 crond(pam_unix)[4280]: session closed
for user root
Sep 14 12:55:10 exegysatademo01 kernel: ENTER for PCI Bus:Slot.Func=2:1.0
Sep 14 12:55:10 exegysatademo01 kernel: ACPI: PCI Interrupt
0000:02:01.0[A] -> GSI 26 (level, low) -> IRQ 233
Sep 14 12:55:10 exegysatademo01 kernel: ENTER
Sep 14 12:55:10 exegysatademo01 kernel: EXIT, rc = 0
Sep 14 12:55:10 exegysatademo01 kernel: EDMA cfg=0x0000291f EDMA IRQ err
cause/mask=0x00000000/0xffffffff
Sep 14 12:55:10 exegysatademo01 last message repeated 7 times
Sep 14 12:55:10 exegysatademo01 kernel: HC0: HC config=0x000100ff HC IRQ
cause=0x00000000
Sep 14 12:55:10 exegysatademo01 kernel: HC1: HC config=0x000100ff HC IRQ
cause=0x00000000
Sep 14 12:55:10 exegysatademo01 kernel: HC MAIN IRQ
cause/mask=0x00000000/0x0087ffff PCI int cause/mask=0x00000000/0x00557fee
Sep 14 12:55:10 exegysatademo01 kernel: PCI config space:
Sep 14 12:55:10 exegysatademo01 kernel: 608111ab 02b00157 01000007 00004010
Sep 14 12:55:10 exegysatademo01 kernel: e0200004 00000000 00003001 e0300004
Sep 14 12:55:10 exegysatademo01 kernel: 00000000 00000000 00000000 11ab11ab
Sep 14 12:55:10 exegysatademo01 kernel: 00000000 00000040 00000000 0000010a
Sep 14 12:55:10 exegysatademo01 kernel: ata3: SATA max PIO4 cmd 0x0 ctl
0xFFFFC20000922120 bmdma 0x0 irq 233
Sep 14 12:55:10 exegysatademo01 kernel: ata4: SATA max PIO4 cmd 0x0 ctl
0xFFFFC20000924120 bmdma 0x0 irq 233
Sep 14 12:55:10 exegysatademo01 kernel: ata5: SATA max PIO4 cmd 0x0 ctl
0xFFFFC20000926120 bmdma 0x0 irq 233
Sep 14 12:55:10 exegysatademo01 kernel: ata6: SATA max PIO4 cmd 0x0 ctl
0xFFFFC20000928120 bmdma 0x0 irq 233
Sep 14 12:55:10 exegysatademo01 kernel: ata7: SATA max PIO4 cmd 0x0 ctl
0xFFFFC20000932120 bmdma 0x0 irq 233
Sep 14 12:55:10 exegysatademo01 kernel: ata8: SATA max PIO4 cmd 0x0 ctl
0xFFFFC20000934120 bmdma 0x0 irq 233
Sep 14 12:55:10 exegysatademo01 kernel: ata9: SATA max PIO4 cmd 0x0 ctl
0xFFFFC20000936120 bmdma 0x0 irq 233
Sep 14 12:55:10 exegysatademo01 kernel: ata10: SATA max PIO4 cmd 0x0 ctl
0xFFFFC20000938120 bmdma 0x0 irq 233
Sep 14 12:55:10 exegysatademo01 kernel: ENTER, port 0, mmio
0xffffc20000922000
Sep 14 12:55:10 exegysatademo01 kernel: Done. Now calling
__sata_phy_reset()
Sep 14 12:55:10 exegysatademo01 kernel: EXIT
Sep 14 12:55:10 exegysatademo01 kernel: ata3: dev 0 ATA, max UDMA/133,
390721968 sectors: lba48
and then the module hangs. Bummer. Where to go from here?
(at least it does something, the mpt fusion driver just gives up :-)
The same hang happens with a short backport to 2.6.13. The module hangs
on the first "drive" (there
are 8 2-drive raid0's defined). No entry in /dev/sd* is created yet by
udev. Any pointers, and I'll happily cause havoc
on my lab machines.
berkley
bshands@exegy.com or berkley@cse.wustl.edu
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-09-14 18:11 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-09-14 18:10 marvell 8 port sata 2.6.14-rc1 problems MV88SX6081 Mr. Berkley Shands
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.