OpenSSL 0.9.8 compile error!

OpenSSL 0.9.8 compile error!

[Ricardo Fialho Tafas Junior]

Hello list,

I'm trying to crosscompile openSSL to PPC8xx. I've downloaded the latest 
version and when I call "make" I get the following error:

ppc_8xx-gcc -I.. -I../.. -I../../include -DOPENSSL_THREADS -D_REENTRANT 
-DDSO_DLFCN -DHAVE_DLFCN_H -DB_ENDIAN -DTERMIO -O3 -Wall -c  -o 
linux_ppc32.o linux_ppc32.s
linux_ppc32.s: Assembler messages:
linux_ppc32.s:109: Error: Unknown pseudo-op:  `.machine'
make[3]: *** [linux_ppc32.o] Error 1
make[3]: Leaving directory `/home/rtafas/voip_devel/openssl-0.9.8/crypto/bn'
make[2]: *** [subdirs] Error 1
make[2]: Leaving directory `/home/rtafas/voip_devel/openssl-0.9.8/crypto'
make[1]: *** [build_crypto] Error 1
make[1]: Leaving directory `/home/rtafas/voip_devel/openssl-0.9.8'
make: *** [top] Error 2

Before that:
I make a "./Configure linux-ppc" and edited the makefile to cross 
compile it and to force it to use ppc-8xx_gcc and ppc_8xx-ar.

Any idea to solve this?
Any "how to" to compile Openssl in embedded enviroment?

Thanks,

-- 
Ricard Fialho Tafas Jr
  R&D Engineer
  Parks S.A. Comunicações Digitais
  www.parks.com.br
  +55 51 4700523
  e-mail: rtafas@parks.com.br

RE: OpenSSL 0.9.8 compile error!

[Eli Brin]

Dear Ricardo,

You need to add no-asm (and probably no-hw).  Please look at the =
makefile
and Configure.

This works on 0.9.7b, but I believe that's you problem.

Eli



-----Original Message-----
From: Ricardo Fialho Tafas Junior [mailto:rtafas@parks.com.br]
Sent: Friday, September 16, 2005 1:19 PM
To: linux-ppc-embedded
Subject: OpenSSL 0.9.8 compile error!


Hello list,

I'm trying to crosscompile openSSL to PPC8xx. I've downloaded the =
latest=20
version and when I call "make" I get the following error:

ppc_8xx-gcc -I.. -I../.. -I../../include -DOPENSSL_THREADS -D_REENTRANT =

-DDSO_DLFCN -DHAVE_DLFCN_H -DB_ENDIAN -DTERMIO -O3 -Wall -c  -o=20
linux_ppc32.o linux_ppc32.s
linux_ppc32.s: Assembler messages:
linux_ppc32.s:109: Error: Unknown pseudo-op:  `.machine'
make[3]: *** [linux_ppc32.o] Error 1
make[3]: Leaving directory =
`/home/rtafas/voip_devel/openssl-0.9.8/crypto/bn'
make[2]: *** [subdirs] Error 1
make[2]: Leaving directory =
`/home/rtafas/voip_devel/openssl-0.9.8/crypto'
make[1]: *** [build_crypto] Error 1
make[1]: Leaving directory `/home/rtafas/voip_devel/openssl-0.9.8'
make: *** [top] Error 2

Before that:
I make a "./Configure linux-ppc" and edited the makefile to cross=20
compile it and to force it to use ppc-8xx_gcc and ppc_8xx-ar.

Any idea to solve this?
Any "how to" to compile Openssl in embedded enviroment?

Thanks,

--=20
Ricard Fialho Tafas Jr
  R&D Engineer
  Parks S.A. Comunica=E7=F5es Digitais
  www.parks.com.br
  +55 51 4700523
  e-mail: rtafas@parks.com.br

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
 This mail arrived via mail.pineapp.net
=20
************************************************************************=
****
********
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & =
computer
viruses.
************************************************************************=
****
********

Re: OpenSSL 0.9.8 compile error!

[Ricardo Fialho Tafas Junior]

it worked and compiled ok.

thanks

Ricard Fialho Tafas Jr
  R&D Engineer
  Parks S.A. Comunicações Digitais
  www.parks.com.br
  +55 51 4700523
  e-mail: rtafas@parks.com.br



Eli Brin wrote:
> Dear Ricardo,
> 
> You need to add no-asm (and probably no-hw).  Please look at the makefile
> and Configure.
> 
> This works on 0.9.7b, but I believe that's you problem.
> 
> Eli
> 
> 
> 
> -----Original Message-----
> From: Ricardo Fialho Tafas Junior [mailto:rtafas@parks.com.br]
> Sent: Friday, September 16, 2005 1:19 PM
> To: linux-ppc-embedded
> Subject: OpenSSL 0.9.8 compile error!
> 
> 
> Hello list,
> 
> I'm trying to crosscompile openSSL to PPC8xx. I've downloaded the latest 
> version and when I call "make" I get the following error:
> 
> ppc_8xx-gcc -I.. -I../.. -I../../include -DOPENSSL_THREADS -D_REENTRANT 
> -DDSO_DLFCN -DHAVE_DLFCN_H -DB_ENDIAN -DTERMIO -O3 -Wall -c  -o 
> linux_ppc32.o linux_ppc32.s
> linux_ppc32.s: Assembler messages:
> linux_ppc32.s:109: Error: Unknown pseudo-op:  `.machine'
> make[3]: *** [linux_ppc32.o] Error 1
> make[3]: Leaving directory `/home/rtafas/voip_devel/openssl-0.9.8/crypto/bn'
> make[2]: *** [subdirs] Error 1
> make[2]: Leaving directory `/home/rtafas/voip_devel/openssl-0.9.8/crypto'
> make[1]: *** [build_crypto] Error 1
> make[1]: Leaving directory `/home/rtafas/voip_devel/openssl-0.9.8'
> make: *** [top] Error 2
> 
> Before that:
> I make a "./Configure linux-ppc" and edited the makefile to cross 
> compile it and to force it to use ppc-8xx_gcc and ppc_8xx-ar.
> 
> Any idea to solve this?
> Any "how to" to compile Openssl in embedded enviroment?
> 
> Thanks,
>