From: martind@noxam.com
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] Asus M3A78-C< - here is the RIGHT sensors3.conf lines
Date: Thu, 11 Jun 2009 04:55:06 +0000 [thread overview]
Message-ID: <43301.1244696106@noxam.com> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 2239 bytes --]
Hi all!
After couple hours... figured out the config for an ASUS M3A78-CM
motherboard
Here you go!
chip "it87-*" "it8712-*"
# The values below have been tested on Asus M3A78-CM motherboards.
label in0 "VCore 1"
ignore in1
label in2 "+3.3V"
ignore in3
label in4 "+12V"
label in5 "+5V"
ignore in6
ignore in7
label in8 "VBat"
compute in4 ((28/10) +1)*@ , @/((28/10) +1)
compute in5 @*(1+(22/10)), @/(1+(22/10))
set in0_min 1.30 * 0.95
set in0_max 1.30 * 1.05
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
set in4_min 12 * 0.95
set in4_max 12 * 1.05
set in5_min 5 * 0.95
set in5_max 5 * 1.05
set temp1_type 2
set temp2_type 2
set temp3_type 3
ignore temp3
label temp1 "CPU Temp"
label temp2 "M/B Temp"
_____________________________________
remove everything else!
here is the output from sensors:
frodo:/sys/class/hwmon/hwmon1/device # sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.30 V (min = +0.85 V, max = +1.60 V)
+3.3 Voltage: +3.28 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +4.97 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.22 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 2295 RPM (min = 600 RPM)
CHASSIS FAN Speed: 0 RPM (min = 600 RPM)
POWER FAN Speed: 1313 RPM (min = 600 RPM)
CPU Temperature: +48.0°C (high = +60.0°C, crit =
+95.0°C)
MB Temperature: +35.0°C (high = +45.0°C, crit =
+95.0°C)
it8712-isa-0290
Adapter: ISA adapter
VCore 1: +1.30 V (min = +1.23 V, max = +1.36 V)
+3.3V: +3.28 V (min = +3.14 V, max = +3.47 V)
+12V: +12.22 V (min = +11.37 V, max = +12.59 V)
+5V: +4.97 V (min = +4.76 V, max = +5.27 V)
VBat: +3.20 V
fan1: 2295 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 1313 RPM (min = 0 RPM)
CPU Temp: +48.0°C (low = -1.0°C, high = -5.0°C)
sensor = thermistor
M/B Temp: +35.0°C (low = -1.0°C, high = +127.0°C)
sensor = thermistor
cpu0_vid: +1.550 V
frodo:/sys/class/hwmon/hwmon1/device #
Best Regards
Martin Desormeaux
a.k.a Neo2048
[-- Attachment #1.2: Type: text/html, Size: 3954 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
reply other threads:[~2009-06-11 4:55 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43301.1244696106@noxam.com \
--to=martind@noxam.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.