support for NS DP83847

support for NS DP83847

[Jan Pedersen]

A patch which adds support for the National semiconducor DP83847 PHY in the
au1000 driver is available at http://www.jp-embedded.com. It is well tested,
feel free to use it. There is also a patch available which adds supports for
the mips based boards available at the same site. If there are iterest of
adding theese to the linux-mips kernel cvs, feel free to do so.

support for NS DP83847

[Jan Pedersen]

A patch which adds support for the National semiconducor DP83847 PHY in the
au1000 driver is available at http://www.jp-embedded.com. It is well tested,
feel free to use it. There is also a patch available which adds supports for
the mips based boards available at the same site. If there are iterest of
adding theese to the linux-mips kernel cvs, feel free to do so.

Re: support for NS DP83847

[Ilya A. Volynets-Evenbakh]

If you are interested in any patches being accepted into LMO CVS tree,
you should email patches in question, not URLs. Noone will bother looking
up your stuff on the web.

Jan Pedersen wrote:

>A patch which adds support for the National semiconducor DP83847 PHY in the
>au1000 driver is available at http://www.jp-embedded.com. It is well tested,
>feel free to use it. There is also a patch available which adds supports for
>the mips based boards available at the same site. If there are iterest of
>adding theese to the linux-mips kernel cvs, feel free to do so.
>
>
>
>  
>

-- 
Ilya A. Volynets-Evenbakh
Total Knowledge. CTO
http://www.total-knowledge.com

RE: support for NS DP83847

[Jan Pedersen]

[-- Attachment #1: Type: text/plain, Size: 1022 bytes --]

Sorry, patches now included.

> -----Original Message-----
> From: linux-mips-bounce@linux-mips.org [mailto:linux-mips-bounce@linux-
> mips.org] On Behalf Of Ilya A. Volynets-Evenbakh
> Sent: 20. september 2005 23:19
> To: Jan Pedersen
> Cc: linux-mips@linux-mips.org
> Subject: Re: support for NS DP83847
> 
> If you are interested in any patches being accepted into LMO CVS tree,
> you should email patches in question, not URLs. Noone will bother looking
> up your stuff on the web.
> 
> Jan Pedersen wrote:
> 
> >A patch which adds support for the National semiconducor DP83847 PHY in
> the
> >au1000 driver is available at http://www.jp-embedded.com. It is well
> tested,
> >feel free to use it. There is also a patch available which adds supports
> for
> >the mips based boards available at the same site. If there are iterest of
> >adding theese to the linux-mips kernel cvs, feel free to do so.
> >
> >
> >
> >
> >
> 
> --
> Ilya A. Volynets-Evenbakh
> Total Knowledge. CTO
> http://www.total-knowledge.com
> 
> 


[-- Attachment #2: q5-jp-2.4.31-0.9.tar.gz --]
[-- Type: application/octet-stream, Size: 3697 bytes --]

[-- Attachment #3: dp83847-jp-2.4.31-1.0.tar.gz --]
[-- Type: application/octet-stream, Size: 1953 bytes --]

RE: support for NS DP83847

[Jan Pedersen]

[-- Attachment #1: Type: text/plain, Size: 1022 bytes --]

Sorry, patches now included.

> -----Original Message-----
> From: linux-mips-bounce@linux-mips.org [mailto:linux-mips-bounce@linux-
> mips.org] On Behalf Of Ilya A. Volynets-Evenbakh
> Sent: 20. september 2005 23:19
> To: Jan Pedersen
> Cc: linux-mips@linux-mips.org
> Subject: Re: support for NS DP83847
> 
> If you are interested in any patches being accepted into LMO CVS tree,
> you should email patches in question, not URLs. Noone will bother looking
> up your stuff on the web.
> 
> Jan Pedersen wrote:
> 
> >A patch which adds support for the National semiconducor DP83847 PHY in
> the
> >au1000 driver is available at http://www.jp-embedded.com. It is well
> tested,
> >feel free to use it. There is also a patch available which adds supports
> for
> >the mips based boards available at the same site. If there are iterest of
> >adding theese to the linux-mips kernel cvs, feel free to do so.
> >
> >
> >
> >
> >
> 
> --
> Ilya A. Volynets-Evenbakh
> Total Knowledge. CTO
> http://www.total-knowledge.com
> 
> 


[-- Attachment #2: q5-jp-2.4.31-0.9.tar.gz --]
[-- Type: application/octet-stream, Size: 3697 bytes --]

[-- Attachment #3: dp83847-jp-2.4.31-1.0.tar.gz --]
[-- Type: application/octet-stream, Size: 1953 bytes --]

Re: support for NS DP83847

[Ralf Baechle]

On Tue, Sep 20, 2005 at 11:27:04PM +0200, Jan Pedersen wrote:

> Sorry, patches now included.

The filename of the tarballs you sent suggest the patches inside are
meant for 2.4.  Linux 2.4 by now is in deep-freeze; nothing that isn't
strictly a bug fix will be accepted anymore.  2.6 Patches of course
would be gladly considered.

  Ralf

Re: support for NS DP83847

[Ralf Baechle]

On Tue, Sep 20, 2005 at 02:18:33PM -0700, Ilya A. Volynets-Evenbakh wrote:

> If you are interested in any patches being accepted into LMO CVS tree,
> you should email patches in question, not URLs. Noone will bother looking
> up your stuff on the web.

Or simply see Documentation/SubmittingPatches:

[...]
6) No MIME, no links, no compression, no attachments.  Just plain text.

Linus and other kernel developers need to be able to read and comment
on the changes you are submitting.  It is important for a kernel
developer to be able to "quote" your changes, using standard e-mail
tools, so that they may comment on specific portions of your code.

For this reason, all patches should be submitting e-mail "inline".
WARNING:  Be wary of your editor's word-wrap corrupting your patch,
if you choose to cut-n-paste your patch.

Do not attach the patch as a MIME attachment, compressed or not.
Many popular e-mail applications will not always transmit a MIME
attachment as plain text, making it impossible to comment on your
code.  A MIME attachment also takes Linus a bit more time to process,
decreasing the likelihood of your MIME-attached change being accepted.

Exception:  If your mailer is mangling patches then someone may ask
you to re-send them using MIME.
[...]

I'm doing plenty of the MIPS maintenance work offline, so URLs really
don't fly.

  Ralf