* xend "invalid token" error
@ 2005-10-10 20:50 Jon Mason
2005-10-10 21:07 ` Anthony Liguori
2005-10-10 22:49 ` Ewan Mellor
0 siblings, 2 replies; 10+ messages in thread
From: Jon Mason @ 2005-10-10 20:50 UTC (permalink / raw)
To: xen-devel
I am geting the following error when I start xend on x86 and amd64
# /etc/init.d/xend start
invalid token
Exception in thread Watcher:Traceback (most recent call last):
File "/usr/lib/python2.3/threading.py", line 442, in __bootstrap
self.run()
File "/usr/lib/python2.3/threading.py", line 422, in run
self.__target(*self.__args, **self.__kwargs)
File "/usr/lib/python/xen/xend/xenstore/xswatch.py", line 43, in watchMain
we = cls.xs.read_watch()
RuntimeError: invalid token
I traced the problem back to the "Make libxenstore thread-safe. It also
spawns an internal" patch
(http://lists.xensource.com/archives/html/xen-changelog/2005-10/msg00118.html).
Not a big issue, as xend will start without problems the second time the
command is executed.
Thanks,
Jon
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xend "invalid token" error
2005-10-10 20:50 xend "invalid token" error Jon Mason
@ 2005-10-10 21:07 ` Anthony Liguori
2005-10-10 21:09 ` Anthony Liguori
2005-10-10 21:11 ` Keir Fraser
2005-10-10 22:49 ` Ewan Mellor
1 sibling, 2 replies; 10+ messages in thread
From: Anthony Liguori @ 2005-10-10 21:07 UTC (permalink / raw)
To: Jon Mason; +Cc: xen-devel
I'm seeing this problem too.
Regards,
Anthony Liguori
Jon Mason wrote:
>I am geting the following error when I start xend on x86 and amd64
># /etc/init.d/xend start
>invalid token
>Exception in thread Watcher:Traceback (most recent call last):
> File "/usr/lib/python2.3/threading.py", line 442, in __bootstrap
> self.run()
> File "/usr/lib/python2.3/threading.py", line 422, in run
> self.__target(*self.__args, **self.__kwargs)
> File "/usr/lib/python/xen/xend/xenstore/xswatch.py", line 43, in watchMain
> we = cls.xs.read_watch()
> RuntimeError: invalid token
>
>
>I traced the problem back to the "Make libxenstore thread-safe. It also
>spawns an internal" patch
>(http://lists.xensource.com/archives/html/xen-changelog/2005-10/msg00118.html).
>
>Not a big issue, as xend will start without problems the second time the
>command is executed.
>
>Thanks,
>Jon
>
>_______________________________________________
>Xen-devel mailing list
>Xen-devel@lists.xensource.com
>http://lists.xensource.com/xen-devel
>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xend "invalid token" error
2005-10-10 21:07 ` Anthony Liguori
@ 2005-10-10 21:09 ` Anthony Liguori
2005-10-10 21:11 ` Keir Fraser
1 sibling, 0 replies; 10+ messages in thread
From: Anthony Liguori @ 2005-10-10 21:09 UTC (permalink / raw)
To: Anthony Liguori; +Cc: xen-devel, Jon Mason
Xend is also generating an "XendError: Exception: unsubscriptable object".
Regards,
Anthony Liguori
Anthony Liguori wrote:
> I'm seeing this problem too.
>
> Regards,
>
> Anthony Liguori
>
> Jon Mason wrote:
>
>> I am geting the following error when I start xend on x86 and amd64
>> # /etc/init.d/xend start
>> invalid token
>> Exception in thread Watcher:Traceback (most recent call last):
>> File "/usr/lib/python2.3/threading.py", line 442, in __bootstrap
>> self.run()
>> File "/usr/lib/python2.3/threading.py", line 422, in run
>> self.__target(*self.__args, **self.__kwargs)
>> File "/usr/lib/python/xen/xend/xenstore/xswatch.py", line 43, in
>> watchMain
>> we = cls.xs.read_watch()
>> RuntimeError: invalid token
>>
>>
>> I traced the problem back to the "Make libxenstore thread-safe. It also
>> spawns an internal" patch
>> (http://lists.xensource.com/archives/html/xen-changelog/2005-10/msg00118.html).
>>
>> Not a big issue, as xend will start without problems the second time the
>> command is executed.
>>
>> Thanks,
>> Jon
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>>
>>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xend "invalid token" error
2005-10-10 21:07 ` Anthony Liguori
2005-10-10 21:09 ` Anthony Liguori
@ 2005-10-10 21:11 ` Keir Fraser
2005-10-10 21:22 ` Anthony Liguori
1 sibling, 1 reply; 10+ messages in thread
From: Keir Fraser @ 2005-10-10 21:11 UTC (permalink / raw)
To: Anthony Liguori; +Cc: xen-devel, Jon Mason
Hmmm... not quite sure how my changes could have screwed that up, esp.
just on 64-bit. Do your changes to allow watches to return varargs
definitely work with x86/64?
-- Keir
On 10 Oct 2005, at 22:07, Anthony Liguori wrote:
> I'm seeing this problem too.
>
> Regards,
>
> Anthony Liguori
>
> Jon Mason wrote:
>
>> I am geting the following error when I start xend on x86 and amd64
>> # /etc/init.d/xend start
>> invalid token
>> Exception in thread Watcher:Traceback (most recent call last):
>> File "/usr/lib/python2.3/threading.py", line 442, in __bootstrap
>> self.run()
>> File "/usr/lib/python2.3/threading.py", line 422, in run
>> self.__target(*self.__args, **self.__kwargs)
>> File "/usr/lib/python/xen/xend/xenstore/xswatch.py", line 43, in
>> watchMain
>> we = cls.xs.read_watch()
>> RuntimeError: invalid token
>>
>>
>> I traced the problem back to the "Make libxenstore thread-safe. It
>> also
>> spawns an internal" patch
>> (http://lists.xensource.com/archives/html/xen-changelog/2005-10/
>> msg00118.html).
>> Not a big issue, as xend will start without problems the second time
>> the
>> command is executed.
>>
>> Thanks,
>> Jon
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xend "invalid token" error
2005-10-10 21:11 ` Keir Fraser
@ 2005-10-10 21:22 ` Anthony Liguori
0 siblings, 0 replies; 10+ messages in thread
From: Anthony Liguori @ 2005-10-10 21:22 UTC (permalink / raw)
To: Keir Fraser; +Cc: xen-devel, Jon Mason
Keir Fraser wrote:
> Hmmm... not quite sure how my changes could have screwed that up,
> esp. just on 64-bit. Do your changes to allow watches to return
> varargs definitely work with x86/64?
Yes, Jon verified that this afternoon :-)
To clarify, I'm on x86_32 so it's on both platforms.
Regards,
Anthony Liguori
> -- Keir
>
> On 10 Oct 2005, at 22:07, Anthony Liguori wrote:
>
>> I'm seeing this problem too.
>>
>> Regards,
>>
>> Anthony Liguori
>>
>> Jon Mason wrote:
>>
>>> I am geting the following error when I start xend on x86 and amd64
>>> # /etc/init.d/xend start
>>> invalid token
>>> Exception in thread Watcher:Traceback (most recent call last):
>>> File "/usr/lib/python2.3/threading.py", line 442, in __bootstrap
>>> self.run()
>>> File "/usr/lib/python2.3/threading.py", line 422, in run
>>> self.__target(*self.__args, **self.__kwargs)
>>> File "/usr/lib/python/xen/xend/xenstore/xswatch.py", line 43, in
>>> watchMain
>>> we = cls.xs.read_watch()
>>> RuntimeError: invalid token
>>>
>>>
>>> I traced the problem back to the "Make libxenstore thread-safe. It
>>> also
>>> spawns an internal" patch
>>> (http://lists.xensource.com/archives/html/xen-changelog/2005-10/
>>> msg00118.html).
>>> Not a big issue, as xend will start without problems the second
>>> time the
>>> command is executed.
>>>
>>> Thanks,
>>> Jon
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xend "invalid token" error
2005-10-10 20:50 xend "invalid token" error Jon Mason
2005-10-10 21:07 ` Anthony Liguori
@ 2005-10-10 22:49 ` Ewan Mellor
2005-10-10 23:09 ` Anthony Liguori
2005-10-10 23:16 ` Jon Mason
1 sibling, 2 replies; 10+ messages in thread
From: Ewan Mellor @ 2005-10-10 22:49 UTC (permalink / raw)
To: xen-devel
On Mon, Oct 10, 2005 at 03:50:21PM -0500, Jon Mason wrote:
> I am geting the following error when I start xend on x86 and amd64
> # /etc/init.d/xend start
> invalid token
> Exception in thread Watcher:Traceback (most recent call last):
> File "/usr/lib/python2.3/threading.py", line 442, in __bootstrap
> self.run()
> File "/usr/lib/python2.3/threading.py", line 422, in run
> self.__target(*self.__args, **self.__kwargs)
> File "/usr/lib/python/xen/xend/xenstore/xswatch.py", line 43, in watchMain
> we = cls.xs.read_watch()
> RuntimeError: invalid token
I thought this had been fixed by changeset 7289:5134f3c512c8. Could you
confirm?
Cheers,
Ewan.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xend "invalid token" error
2005-10-10 22:49 ` Ewan Mellor
@ 2005-10-10 23:09 ` Anthony Liguori
2005-10-12 13:07 ` Ewan Mellor
2005-10-10 23:16 ` Jon Mason
1 sibling, 1 reply; 10+ messages in thread
From: Anthony Liguori @ 2005-10-10 23:09 UTC (permalink / raw)
To: Ewan Mellor; +Cc: xen-devel
I'm seeing this with 7295:60b0ac30ba18
Regards,
Anthony Liguori
Ewan Mellor wrote:
>On Mon, Oct 10, 2005 at 03:50:21PM -0500, Jon Mason wrote:
>
>
>
>>I am geting the following error when I start xend on x86 and amd64
>># /etc/init.d/xend start
>>invalid token
>>Exception in thread Watcher:Traceback (most recent call last):
>> File "/usr/lib/python2.3/threading.py", line 442, in __bootstrap
>> self.run()
>> File "/usr/lib/python2.3/threading.py", line 422, in run
>> self.__target(*self.__args, **self.__kwargs)
>> File "/usr/lib/python/xen/xend/xenstore/xswatch.py", line 43, in watchMain
>> we = cls.xs.read_watch()
>> RuntimeError: invalid token
>>
>>
>
>I thought this had been fixed by changeset 7289:5134f3c512c8. Could you
>confirm?
>
>Cheers,
>
>Ewan.
>
>_______________________________________________
>Xen-devel mailing list
>Xen-devel@lists.xensource.com
>http://lists.xensource.com/xen-devel
>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xend "invalid token" error
2005-10-10 22:49 ` Ewan Mellor
2005-10-10 23:09 ` Anthony Liguori
@ 2005-10-10 23:16 ` Jon Mason
1 sibling, 0 replies; 10+ messages in thread
From: Jon Mason @ 2005-10-10 23:16 UTC (permalink / raw)
To: Ewan Mellor; +Cc: xen-devel
On Mon, Oct 10, 2005 at 11:49:31PM +0100, Ewan Mellor wrote:
> On Mon, Oct 10, 2005 at 03:50:21PM -0500, Jon Mason wrote:
>
> > I am geting the following error when I start xend on x86 and amd64
> > # /etc/init.d/xend start
> > invalid token
> > Exception in thread Watcher:Traceback (most recent call last):
> > File "/usr/lib/python2.3/threading.py", line 442, in __bootstrap
> > self.run()
> > File "/usr/lib/python2.3/threading.py", line 422, in run
> > self.__target(*self.__args, **self.__kwargs)
> > File "/usr/lib/python/xen/xend/xenstore/xswatch.py", line 43, in watchMain
> > we = cls.xs.read_watch()
> > RuntimeError: invalid token
>
> I thought this had been fixed by changeset 7289:5134f3c512c8. Could you
> confirm?
I did a mercurial pull 10 minutes ago, and I am still seeing the error.
Also, I am seeing this on python 2.4.
Thanks,
Jon
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xend "invalid token" error
2005-10-10 23:09 ` Anthony Liguori
@ 2005-10-12 13:07 ` Ewan Mellor
2005-10-12 15:06 ` Anthony Liguori
0 siblings, 1 reply; 10+ messages in thread
From: Ewan Mellor @ 2005-10-12 13:07 UTC (permalink / raw)
To: xen-devel
On Mon, Oct 10, 2005 at 06:09:40PM -0500, Anthony Liguori wrote:
> I'm seeing this with 7295:60b0ac30ba18
>
> Regards,
>
> Anthony Liguori
>
> Ewan Mellor wrote:
>
> >On Mon, Oct 10, 2005 at 03:50:21PM -0500, Jon Mason wrote:
> >
> >
> >
> >>I am geting the following error when I start xend on x86 and amd64
> >># /etc/init.d/xend start
> >>invalid token
> >>Exception in thread Watcher:Traceback (most recent call last):
> >> File "/usr/lib/python2.3/threading.py", line 442, in __bootstrap
> >> self.run()
> >> File "/usr/lib/python2.3/threading.py", line 422, in run
> >> self.__target(*self.__args, **self.__kwargs)
> >> File "/usr/lib/python/xen/xend/xenstore/xswatch.py", line 43, in
> >> watchMain
> >> we = cls.xs.read_watch()
> >>RuntimeError: invalid token
This should be fixed as of changeset 7349:00a324b3a2db.
Cheers,
Ewan.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: xend "invalid token" error
2005-10-12 13:07 ` Ewan Mellor
@ 2005-10-12 15:06 ` Anthony Liguori
0 siblings, 0 replies; 10+ messages in thread
From: Anthony Liguori @ 2005-10-12 15:06 UTC (permalink / raw)
To: Ewan Mellor; +Cc: xen-devel
Ewan Mellor wrote:
>On Mon, Oct 10, 2005 at 06:09:40PM -0500, Anthony Liguori wrote:
>
>
>This should be fixed as of changeset 7349:00a324b3a2db.
>
>
Yes, it is.
Thanks Ewan.
Regards,
Anthony Liguori
>Cheers,
>
>Ewan.
>
>_______________________________________________
>Xen-devel mailing list
>Xen-devel@lists.xensource.com
>http://lists.xensource.com/xen-devel
>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2005-10-12 15:06 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-10-10 20:50 xend "invalid token" error Jon Mason
2005-10-10 21:07 ` Anthony Liguori
2005-10-10 21:09 ` Anthony Liguori
2005-10-10 21:11 ` Keir Fraser
2005-10-10 21:22 ` Anthony Liguori
2005-10-10 22:49 ` Ewan Mellor
2005-10-10 23:09 ` Anthony Liguori
2005-10-12 13:07 ` Ewan Mellor
2005-10-12 15:06 ` Anthony Liguori
2005-10-10 23:16 ` Jon Mason
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.