* [PATCH 1/17] fbcon/fbdev: Move softcursor out of fbdev to fbcon
@ 2005-10-18 9:13 Antonino A. Daplas
0 siblings, 0 replies; only message in thread
From: Antonino A. Daplas @ 2005-10-18 9:13 UTC (permalink / raw)
To: Andrew Morton; +Cc: Linux Fbdev development list
According to Jon Smirl, filling in the field fb_cursor with soft_cursor for
drivers that do not support hardware cursors is redundant. The soft_cursor
function is usable by all drivers because it is just a wrapper around
fb_imageblit. And because soft_cursor is an fbcon-specific hook, the file
is moved to the console directory.
Thus, drivers that do not support hardware cursors can leave the fb_cursor
field blank. For drivers that do, they can fill up this field with their
own version.
The end result is a smaller code size. And if the framebuffer console is
not loaded, module/kernel size is also reduced because the soft_cursor
module will also not be loaded.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
---
drivers/video/68328fb.c | 1
drivers/video/Kconfig | 79 ---------------------------------
drivers/video/Makefile | 1
drivers/video/acornfb.c | 1
drivers/video/amba-clcd.c | 1
drivers/video/amifb.c | 1
drivers/video/arcfb.c | 1
drivers/video/asiliantfb.c | 1
drivers/video/aty/aty128fb.c | 1
drivers/video/aty/atyfb_base.c | 1
drivers/video/aty/radeon_base.c | 1
drivers/video/bw2.c | 1
drivers/video/cg14.c | 1
drivers/video/cg3.c | 1
drivers/video/cg6.c | 1
drivers/video/chipsfb.c | 1
drivers/video/cirrusfb.c | 1
drivers/video/clps711xfb.c | 1
drivers/video/console/Makefile | 2
drivers/video/console/bitblit.c | 7 ++
drivers/video/console/fbcon.h | 2
drivers/video/console/softcursor.c | 72 ++++++++++++++++++++++++++++++
drivers/video/controlfb.c | 1
drivers/video/cyber2000fb.c | 1
drivers/video/cyblafb.c | 1
drivers/video/dnfb.c | 1
drivers/video/epson1355fb.c | 1
drivers/video/ffb.c | 3 -
drivers/video/fm2fb.c | 1
drivers/video/gbefb.c | 1
drivers/video/geode/Kconfig | 1
drivers/video/geode/gx1fb_core.c | 1
drivers/video/hitfb.c | 1
drivers/video/hpfb.c | 1
drivers/video/imsttfb.c | 1
drivers/video/imxfb.c | 1
drivers/video/intelfb/intelfbdrv.c | 2
drivers/video/kyro/fbdev.c | 1
drivers/video/leo.c | 1
drivers/video/macfb.c | 1
drivers/video/matrox/matroxfb_accel.c | 2
drivers/video/matrox/matroxfb_crtc2.c | 1
drivers/video/maxinefb.c | 1
drivers/video/neofb.c | 1
drivers/video/nvidia/nvidia.c | 2
drivers/video/offb.c | 1
drivers/video/p9100.c | 1
drivers/video/platinumfb.c | 1
drivers/video/pm2fb.c | 1
drivers/video/pmag-ba-fb.c | 1
drivers/video/pmagb-b-fb.c | 1
drivers/video/pvr2fb.c | 1
drivers/video/pxafb.c | 1
drivers/video/q40fb.c | 1
drivers/video/radeonfb.c | 1
drivers/video/s1d13xxxfb.c | 1
drivers/video/s3c2410fb.c | 1
drivers/video/sa1100fb.c | 1
drivers/video/savage/savagefb_driver.c | 1
drivers/video/sgivwfb.c | 1
drivers/video/sis/sis_main.c | 2
drivers/video/skeletonfb.c | 9 +--
drivers/video/softcursor.c | 72 ------------------------------
drivers/video/sstfb.c | 1
drivers/video/stifb.c | 1
drivers/video/tcx.c | 1
drivers/video/tdfxfb.c | 1
drivers/video/tgafb.c | 1
drivers/video/tridentfb.c | 1
drivers/video/tx3912fb.c | 1
drivers/video/valkyriefb.c | 1
drivers/video/vesafb.c | 1
drivers/video/vfb.c | 1
drivers/video/vga16fb.c | 1
drivers/video/w100fb.c | 1
include/linux/fb.h | 1
76 files changed, 88 insertions(+), 230 deletions(-)
diff --git a/drivers/video/68328fb.c b/drivers/video/68328fb.c
--- a/drivers/video/68328fb.c
+++ b/drivers/video/68328fb.c
@@ -113,7 +113,6 @@ static struct fb_ops mc68x328fb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
.fb_mmap = mc68x328fb_mmap,
};
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -65,15 +65,6 @@ config FB_CFB_IMAGEBLIT
blitting. This is used by drivers that don't provide their own
(accelerated) version.
-config FB_SOFT_CURSOR
- tristate
- depends on FB
- default n
- ---help---
- Include the soft_cursor function for generic software cursor support.
- This is used by drivers that don't provide their own (accelerated)
- version.
-
config FB_MACMODES
tristate
depends on FB
@@ -114,7 +105,6 @@ config FB_CIRRUS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
This enables support for Cirrus Logic GD542x/543x based boards on
Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
@@ -133,7 +123,6 @@ config FB_PM2
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Permedia2 AGP frame
buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
@@ -152,7 +141,6 @@ config FB_ARMCLCD
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This framebuffer device driver is for the ARM PrimeCell PL110
Colour LCD controller. ARM PrimeCells provide the building
@@ -169,7 +157,6 @@ config FB_ACORN
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Acorn VIDC graphics
hardware found in Acorn RISC PCs and other ARM-based machines. If
@@ -181,7 +168,6 @@ config FB_CLPS711X
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y to enable the Framebuffer driver for the CLPS7111 and
EP7212 processors.
@@ -192,7 +178,6 @@ config FB_SA1100
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is a framebuffer device for the SA-1100 LCD Controller.
See <http://www.linux-fbdev.org/> for information on framebuffer
@@ -207,7 +192,6 @@ config FB_IMX
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_CYBER2000
tristate "CyberPro 2000/2010/5000 support"
@@ -215,7 +199,6 @@ config FB_CYBER2000
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Integraphics CyberPro 20x0 and 5000
VGA chips used in the Rebel.com Netwinder and other machines.
@@ -228,7 +211,6 @@ config FB_APOLLO
default y
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_Q40
bool
@@ -237,12 +219,10 @@ config FB_Q40
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_AMIGA
tristate "Amiga native chipset support"
depends on FB && AMIGA
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the builtin graphics
chipset found in Amigas.
@@ -282,7 +262,6 @@ config FB_CYBER
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Cybervision 64 graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
@@ -297,7 +276,6 @@ config FB_VIRGE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Cybervision 64/3D graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
@@ -320,7 +298,6 @@ config FB_FM2
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Amiga FrameMaster
card from BSC (exhibited 1992 but not shipped as a CBM product).
@@ -331,7 +308,6 @@ config FB_ARC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Arc Monochrome LCD board. The board
is based on the KS-108 lcd controller and is typically a matrix
@@ -354,7 +330,6 @@ config FB_OF
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
Say Y if you want support with Open Firmware for your graphics
@@ -366,7 +341,6 @@ config FB_CONTROL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
This driver supports a frame buffer for the graphics adapter in the
@@ -378,7 +352,6 @@ config FB_PLATINUM
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
This driver supports a frame buffer for the "platinum" graphics
@@ -390,7 +363,6 @@ config FB_VALKYRIE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
This driver supports a frame buffer for the "valkyrie" graphics
@@ -402,7 +374,6 @@ config FB_CT65550
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Chips & Technologies
65550 graphics chip in PowerBooks.
@@ -413,13 +384,11 @@ config FB_ASILIANT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_IMSTT
bool "IMS Twin Turbo display support"
depends on (FB = y) && PCI
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC
help
The IMS Twin Turbo is a PCI-based frame buffer card bundled with
@@ -431,7 +400,6 @@ config FB_VGA16
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for VGA 16 color graphic
cards. Say Y if you have such a card.
@@ -445,7 +413,6 @@ config FB_STI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
default y
---help---
STI refers to the HP "Standard Text Interface" which is a set of
@@ -466,7 +433,6 @@ config FB_MAC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
# bool ' Apple DAFB display support' CONFIG_FB_DAFB
@@ -475,7 +441,6 @@ config FB_HP300
depends on (FB = y) && HP300
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
default y
config FB_TGA
@@ -484,7 +449,6 @@ config FB_TGA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for generic TGA graphic
cards. Say Y if you have one of those.
@@ -495,7 +459,6 @@ config FB_VESA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
@@ -513,7 +476,6 @@ config FB_HGA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y here if you have a Hercules mono graphics card.
@@ -542,7 +504,6 @@ config FB_SGIVW
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
SGI Visual Workstation support for framebuffer graphics.
@@ -552,7 +513,6 @@ config FB_GBE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for SGI Graphics Backend.
This chip is used in SGI O2 and Visual Workstation 320/540.
@@ -580,7 +540,6 @@ config FB_BW2
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the BWtwo frame buffer.
@@ -589,7 +548,6 @@ config FB_CG3
depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGthree frame buffer.
@@ -598,7 +556,6 @@ config FB_CG6
depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGsix (GX, TurboGX)
frame buffer.
@@ -609,7 +566,6 @@ config FB_PVR2
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Say Y here if you have a PowerVR 2 card in your box. If you plan to
run linux on your Dreamcast, you will have to say Y here.
@@ -631,7 +587,6 @@ config FB_EPSON1355
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Build in support for the SED1355 Epson Research Embedded RAMDAC
LCD/CRT Controller (since redesignated as the S1D13505) as a
@@ -676,7 +631,6 @@ config FB_S1D13XXX
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for S1D13XXX framebuffer device family (currently only
working with S1D13806). Product specs at
@@ -691,7 +645,6 @@ config FB_NVIDIA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports graphics boards with the nVidia chips, TNT
and newer. For very old chipsets, such as the RIVA128, then use
@@ -809,7 +762,6 @@ config FB_INTEL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports the on-board graphics built in to the Intel
830M/845G/852GM/855GM/865G chipsets.
@@ -832,7 +784,6 @@ config FB_MATROX
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_TILEBLITTING
select FB_MACMODES if PPC_PMAC
---help---
@@ -973,7 +924,6 @@ config FB_RADEON_OLD
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC
help
Choose this option if you want to use an ATI Radeon graphics card as
@@ -991,7 +941,6 @@ config FB_RADEON
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC_OF
help
Choose this option if you want to use an ATI Radeon graphics card as
@@ -1029,7 +978,6 @@ config FB_ATY128
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC_PMAC
help
This driver supports graphics boards with the ATI Rage128 chips.
@@ -1045,7 +993,6 @@ config FB_ATY
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC
help
This driver supports graphics boards with the ATI Mach64 chips.
@@ -1103,7 +1050,6 @@ config FB_SAVAGE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports notebooks and computers with S3 Savage PCI/AGP
chips.
@@ -1140,7 +1086,6 @@ config FB_SIS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the SiS 300, 315, 330
and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
@@ -1170,7 +1115,6 @@ config FB_NEOMAGIC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports notebooks with NeoMagic PCI chips.
Say Y if you have such a graphics card.
@@ -1184,7 +1128,6 @@ config FB_KYRO
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
graphics board.
@@ -1198,7 +1141,6 @@ config FB_3DFX
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
- select FB_SOFT_CURSOR
help
This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
chips. Say Y if you have such a graphics board.
@@ -1220,7 +1162,6 @@ config FB_VOODOO1
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
Voodoo2 (cvg) based graphics card.
@@ -1237,7 +1178,6 @@ config FB_CYBLA
tristate "Cyberblade/i1 support"
depends on FB && PCI
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select VIDEO_SELECT
---help---
This driver is supposed to support the Trident Cyberblade/i1
@@ -1265,7 +1205,6 @@ config FB_TRIDENT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
This driver is supposed to support graphics boards with the
Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
@@ -1314,7 +1253,6 @@ config FB_FFB
depends on FB_SBUS && SPARC64
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Creator, Creator3D,
and Elite3D graphics boards.
@@ -1325,7 +1263,6 @@ config FB_TCX
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the TCX 24/8bit frame
buffer.
@@ -1336,7 +1273,6 @@ config FB_CG14
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGfourteen frame
buffer on Desktop SPARCsystems with the SX graphics option.
@@ -1347,7 +1283,6 @@ config FB_P9100
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the P9100 card
supported on Sparcbook 3 machines.
@@ -1358,7 +1293,6 @@ config FB_LEO
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the SBUS-based Sun ZX
(leo) frame buffer cards.
@@ -1373,7 +1307,6 @@ config FB_IGA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the framebuffer device for the INTERGRAPHICS 1680 and
successor frame buffer cards.
@@ -1384,7 +1317,6 @@ config FB_HIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Hitachi HD64461 LCD
frame buffer card.
@@ -1395,7 +1327,6 @@ config FB_PMAG_AA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
used mainly in the MIPS-based DECstation series.
@@ -1406,7 +1337,6 @@ config FB_PMAG_BA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
used mainly in the MIPS-based DECstation series.
@@ -1417,7 +1347,6 @@ config FB_PMAGB_B
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the PMAGB-B TURBOchannel framebuffer card used mainly
in the MIPS-based DECstation series. The card is currently only
@@ -1429,7 +1358,6 @@ config FB_MAXINE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the onboard framebuffer (1024x768x8) in the Personal
DECstation series (Personal DECstation 5000/20, /25, /33, /50,
@@ -1441,7 +1369,6 @@ config FB_TX3912
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
@@ -1454,7 +1381,6 @@ config FB_G364
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
The G364 driver is the framebuffer used in MIPS Magnum 4000 and
Olivetti M700-10 systems.
@@ -1465,7 +1391,6 @@ config FB_68328
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y here if you want to support the built-in frame buffer of
the Motorola 68328 CPU family.
@@ -1476,7 +1401,6 @@ config FB_PXA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Frame buffer driver for the built-in LCD controller in the Intel
PXA2x0 processor.
@@ -1511,7 +1435,6 @@ config FB_W100
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
@@ -1528,7 +1451,6 @@ config FB_S3C2410
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Frame buffer driver for the built-in LCD controller in the Samsung
S3C2410 processor.
@@ -1552,7 +1474,6 @@ config FB_VIRTUAL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
This is a `virtual' frame buffer device. It operates on a chunk of
unswappable kernel memory instead of on the memory of a graphics
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -16,7 +16,6 @@ fb-objs := $(f
obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o
obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o
obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
-obj-$(CONFIG_FB_SOFT_CURSOR) += softcursor.o
obj-$(CONFIG_FB_MACMODES) += macmodes.o
# Hardware specific drivers go first
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -926,7 +926,6 @@ static struct fb_ops acornfb_ops = {
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_mmap = acornfb_mmap,
- .fb_cursor = soft_cursor,
};
/*
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -332,7 +332,6 @@ static struct fb_ops clcdfb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
.fb_mmap = clcdfb_mmap,
};
diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -1185,7 +1185,6 @@ static struct fb_ops amifb_ops = {
.fb_fillrect = amifb_fillrect,
.fb_copyarea = amifb_copyarea,
.fb_imageblit = amifb_imageblit,
- .fb_cursor = soft_cursor,
.fb_ioctl = amifb_ioctl,
};
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -514,7 +514,6 @@ static struct fb_ops arcfb_ops = {
.fb_fillrect = arcfb_fillrect,
.fb_copyarea = arcfb_copyarea,
.fb_imageblit = arcfb_imageblit,
- .fb_cursor = soft_cursor,
.fb_ioctl = arcfb_ioctl,
};
diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/asiliantfb.c
@@ -106,7 +106,6 @@ static struct fb_ops asiliantfb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
/* Calculate the ratios for the dot clocks without using a single long long
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -478,7 +478,6 @@ static struct fb_ops aty128fb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
#ifdef CONFIG_PMAC_BACKLIGHT
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -292,7 +292,6 @@ static struct fb_ops atyfb_ops = {
.fb_fillrect = atyfb_fillrect,
.fb_copyarea = atyfb_copyarea,
.fb_imageblit = atyfb_imageblit,
- .fb_cursor = soft_cursor,
#ifdef __sparc__
.fb_mmap = atyfb_mmap,
#endif
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -1873,7 +1873,6 @@ static struct fb_ops radeonfb_ops = {
.fb_fillrect = radeonfb_fillrect,
.fb_copyarea = radeonfb_copyarea,
.fb_imageblit = radeonfb_imageblit,
- .fb_cursor = soft_cursor,
};
diff --git a/drivers/video/bw2.c b/drivers/video/bw2.c
--- a/drivers/video/bw2.c
+++ b/drivers/video/bw2.c
@@ -51,7 +51,6 @@ static struct fb_ops bw2_ops = {
.fb_imageblit = cfb_imageblit,
.fb_mmap = bw2_mmap,
.fb_ioctl = bw2_ioctl,
- .fb_cursor = soft_cursor,
};
/* OBio addresses for the bwtwo registers */
diff --git a/drivers/video/cg14.c b/drivers/video/cg14.c
--- a/drivers/video/cg14.c
+++ b/drivers/video/cg14.c
@@ -49,7 +49,6 @@ static struct fb_ops cg14_ops = {
.fb_imageblit = cfb_imageblit,
.fb_mmap = cg14_mmap,
.fb_ioctl = cg14_ioctl,
- .fb_cursor = soft_cursor,
};
#define CG14_MCR_INTENABLE_SHIFT 7
diff --git a/drivers/video/cg3.c b/drivers/video/cg3.c
--- a/drivers/video/cg3.c
+++ b/drivers/video/cg3.c
@@ -50,7 +50,6 @@ static struct fb_ops cg3_ops = {
.fb_imageblit = cfb_imageblit,
.fb_mmap = cg3_mmap,
.fb_ioctl = cg3_ioctl,
- .fb_cursor = soft_cursor,
};
diff --git a/drivers/video/cg6.c b/drivers/video/cg6.c
--- a/drivers/video/cg6.c
+++ b/drivers/video/cg6.c
@@ -54,7 +54,6 @@ static struct fb_ops cg6_ops = {
.fb_sync = cg6_sync,
.fb_mmap = cg6_mmap,
.fb_ioctl = cg6_ioctl,
- .fb_cursor = soft_cursor,
};
/* Offset of interesting structures in the OBIO space */
diff --git a/drivers/video/chipsfb.c b/drivers/video/chipsfb.c
--- a/drivers/video/chipsfb.c
+++ b/drivers/video/chipsfb.c
@@ -91,7 +91,6 @@ static struct fb_ops chipsfb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
static int chipsfb_check_var(struct fb_var_screeninfo *var,
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -548,7 +548,6 @@ static struct fb_ops cirrusfb_ops = {
.fb_fillrect = cirrusfb_fillrect,
.fb_copyarea = cirrusfb_copyarea,
.fb_imageblit = cirrusfb_imageblit,
- .fb_cursor = soft_cursor,
};
/*--- Hardware Specific Routines -------------------------------------------*/
diff --git a/drivers/video/clps711xfb.c b/drivers/video/clps711xfb.c
--- a/drivers/video/clps711xfb.c
+++ b/drivers/video/clps711xfb.c
@@ -219,7 +219,6 @@ static struct fb_ops clps7111fb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
static int
diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile
--- a/drivers/video/console/Makefile
+++ b/drivers/video/console/Makefile
@@ -26,7 +26,7 @@ obj-$(CONFIG_PROM_CONSOLE) += pro
obj-$(CONFIG_STI_CONSOLE) += sticon.o sticore.o font.o
obj-$(CONFIG_VGA_CONSOLE) += vgacon.o
obj-$(CONFIG_MDA_CONSOLE) += mdacon.o
-obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += fbcon.o bitblit.o font.o
+obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += fbcon.o bitblit.o font.o softcursor.o
ifeq ($(CONFIG_FB_TILEBLITTING),y)
obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += tileblit.o
endif
diff --git a/drivers/video/console/bitblit.c b/drivers/video/console/bitblit.c
--- a/drivers/video/console/bitblit.c
+++ b/drivers/video/console/bitblit.c
@@ -272,6 +272,7 @@ static void bit_cursor(struct vc_data *v
int w = (vc->vc_font.width + 7) >> 3, c;
int y = real_y(p, vc->vc_y);
int attribute, use_sw = (vc->vc_cursor_type & 0x10);
+ int err = 1;
char *src;
cursor.set = 0;
@@ -408,7 +409,11 @@ static void bit_cursor(struct vc_data *v
cursor.image.depth = 1;
cursor.rop = ROP_XOR;
- info->fbops->fb_cursor(info, &cursor);
+ if (info->fbops->fb_cursor)
+ err = info->fbops->fb_cursor(info, &cursor);
+
+ if (err)
+ soft_cursor(info, &cursor);
ops->cursor_reset = 0;
}
diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h
--- a/drivers/video/console/fbcon.h
+++ b/drivers/video/console/fbcon.h
@@ -167,5 +167,5 @@ extern void fbcon_set_tileops(struct vc_
struct display *p, struct fbcon_ops *ops);
#endif
extern void fbcon_set_bitops(struct fbcon_ops *ops);
-
+extern int soft_cursor(struct fb_info *info, struct fb_cursor *cursor);
#endif /* _VIDEO_FBCON_H */
diff --git a/drivers/video/console/softcursor.c b/drivers/video/console/softcursor.c
new file mode 100644
--- /dev/null
+++ b/drivers/video/console/softcursor.c
@@ -0,0 +1,72 @@
+/*
+ * linux/drivers/video/softcursor.c -- Generic software cursor for frame buffer devices
+ *
+ * Created 14 Nov 2002 by James Simmons
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/tty.h>
+#include <linux/fb.h>
+#include <linux/slab.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+int soft_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+ unsigned int scan_align = info->pixmap.scan_align - 1;
+ unsigned int buf_align = info->pixmap.buf_align - 1;
+ unsigned int i, size, dsize, s_pitch, d_pitch;
+ struct fb_image *image;
+ u8 *dst, *src;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return 0;
+
+ s_pitch = (cursor->image.width + 7) >> 3;
+ dsize = s_pitch * cursor->image.height;
+
+ src = kmalloc(dsize + sizeof(struct fb_image), GFP_ATOMIC);
+ if (!src)
+ return -ENOMEM;
+
+ image = (struct fb_image *) (src + dsize);
+ *image = cursor->image;
+ d_pitch = (s_pitch + scan_align) & ~scan_align;
+
+ size = d_pitch * image->height + buf_align;
+ size &= ~buf_align;
+ dst = fb_get_buffer_offset(info, &info->pixmap, size);
+
+ if (cursor->enable) {
+ switch (cursor->rop) {
+ case ROP_XOR:
+ for (i = 0; i < dsize; i++)
+ src[i] = image->data[i] ^ cursor->mask[i];
+ break;
+ case ROP_COPY:
+ default:
+ for (i = 0; i < dsize; i++)
+ src[i] = image->data[i] & cursor->mask[i];
+ break;
+ }
+ } else
+ memcpy(src, image->data, dsize);
+
+ fb_pad_aligned_buffer(dst, d_pitch, src, s_pitch, image->height);
+ image->data = dst;
+ info->fbops->fb_imageblit(info, image);
+ kfree(src);
+ return 0;
+}
+
+EXPORT_SYMBOL(soft_cursor);
+
+MODULE_AUTHOR("James Simmons <jsimmons@users.sf.net>");
+MODULE_DESCRIPTION("Generic software cursor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c
--- a/drivers/video/controlfb.c
+++ b/drivers/video/controlfb.c
@@ -176,7 +176,6 @@ static struct fb_ops controlfb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -1064,7 +1064,6 @@ static struct fb_ops cyber2000fb_ops = {
.fb_fillrect = cyber2000fb_fillrect,
.fb_copyarea = cyber2000fb_copyarea,
.fb_imageblit = cyber2000fb_imageblit,
- .fb_cursor = soft_cursor,
.fb_sync = cyber2000fb_sync,
};
diff --git a/drivers/video/cyblafb.c b/drivers/video/cyblafb.c
--- a/drivers/video/cyblafb.c
+++ b/drivers/video/cyblafb.c
@@ -968,7 +968,6 @@ static struct fb_ops cyblafb_ops __devin
.fb_fillrect = cyblafb_fillrect,
.fb_copyarea= cyblafb_copyarea,
.fb_imageblit = cyblafb_imageblit,
- .fb_cursor = soft_cursor,
};
//==========================================================================
diff --git a/drivers/video/dnfb.c b/drivers/video/dnfb.c
--- a/drivers/video/dnfb.c
+++ b/drivers/video/dnfb.c
@@ -114,7 +114,6 @@ static struct fb_ops dn_fb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = dnfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
struct fb_var_screeninfo dnfb_var __devinitdata = {
diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
--- a/drivers/video/epson1355fb.c
+++ b/drivers/video/epson1355fb.c
@@ -482,7 +482,6 @@ static struct fb_ops epson1355fb_fbops =
.fb_imageblit = cfb_imageblit,
.fb_read = epson1355fb_read,
.fb_write = epson1355fb_write,
- .fb_cursor = soft_cursor,
};
/* ------------------------------------------------------------------------- */
diff --git a/drivers/video/ffb.c b/drivers/video/ffb.c
--- a/drivers/video/ffb.c
+++ b/drivers/video/ffb.c
@@ -57,9 +57,6 @@ static struct fb_ops ffb_ops = {
.fb_sync = ffb_sync,
.fb_mmap = ffb_mmap,
.fb_ioctl = ffb_ioctl,
-
- /* XXX Use FFB hw cursor once fb cursor API is better understood... */
- .fb_cursor = soft_cursor,
};
/* Register layout and definitions */
diff --git a/drivers/video/fm2fb.c b/drivers/video/fm2fb.c
--- a/drivers/video/fm2fb.c
+++ b/drivers/video/fm2fb.c
@@ -172,7 +172,6 @@ static struct fb_ops fm2fb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
/*
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -1038,7 +1038,6 @@ static struct fb_ops gbefb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
/*
diff --git a/drivers/video/geode/Kconfig b/drivers/video/geode/Kconfig
--- a/drivers/video/geode/Kconfig
+++ b/drivers/video/geode/Kconfig
@@ -14,7 +14,6 @@ config FB_GEODE_GX1
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Framebuffer driver for the display controller integrated into the
AMD Geode GX1 processor.
diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/geode/gx1fb_core.c
--- a/drivers/video/geode/gx1fb_core.c
+++ b/drivers/video/geode/gx1fb_core.c
@@ -275,7 +275,6 @@ static struct fb_ops gx1fb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
static struct fb_info * __init gx1fb_init_fbinfo(struct device *dev)
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -262,7 +262,6 @@ static struct fb_ops hitfb_ops = {
.fb_fillrect = hitfb_fillrect,
.fb_copyarea = hitfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
int __init hitfb_init(void)
diff --git a/drivers/video/hpfb.c b/drivers/video/hpfb.c
--- a/drivers/video/hpfb.c
+++ b/drivers/video/hpfb.c
@@ -193,7 +193,6 @@ static struct fb_ops hpfb_ops = {
.fb_fillrect = hpfb_fillrect,
.fb_copyarea = hpfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
.fb_sync = hpfb_sync,
};
diff --git a/drivers/video/imsttfb.c b/drivers/video/imsttfb.c
--- a/drivers/video/imsttfb.c
+++ b/drivers/video/imsttfb.c
@@ -1344,7 +1344,6 @@ static struct fb_ops imsttfb_ops = {
.fb_fillrect = imsttfb_fillrect,
.fb_copyarea = imsttfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
.fb_ioctl = imsttfb_ioctl,
};
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -298,7 +298,6 @@ static struct fb_ops imxfb_ops = {
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_blank = imxfb_blank,
- .fb_cursor = soft_cursor, /* FIXME: i.MX can do hardware cursor */
};
/*
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/intelfb/intelfbdrv.c
@@ -1485,7 +1485,7 @@ intelfb_cursor(struct fb_info *info, str
#endif
if (!dinfo->hwcursor)
- return soft_cursor(info, cursor);
+ return -ENODEV;
intelfbhw_cursor_hide(dinfo);
diff --git a/drivers/video/kyro/fbdev.c b/drivers/video/kyro/fbdev.c
--- a/drivers/video/kyro/fbdev.c
+++ b/drivers/video/kyro/fbdev.c
@@ -669,7 +669,6 @@ static struct fb_ops kyrofb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
static int __devinit kyrofb_probe(struct pci_dev *pdev,
diff --git a/drivers/video/leo.c b/drivers/video/leo.c
--- a/drivers/video/leo.c
+++ b/drivers/video/leo.c
@@ -51,7 +51,6 @@ static struct fb_ops leo_ops = {
.fb_imageblit = cfb_imageblit,
.fb_mmap = leo_mmap,
.fb_ioctl = leo_ioctl,
- .fb_cursor = soft_cursor,
};
#define LEO_OFF_LC_SS0_KRN 0x00200000UL
diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c
--- a/drivers/video/macfb.c
+++ b/drivers/video/macfb.c
@@ -589,7 +589,6 @@ static struct fb_ops macfb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
void __init macfb_setup(char *options)
diff --git a/drivers/video/matrox/matroxfb_accel.c b/drivers/video/matrox/matroxfb_accel.c
--- a/drivers/video/matrox/matroxfb_accel.c
+++ b/drivers/video/matrox/matroxfb_accel.c
@@ -122,7 +122,7 @@ void matrox_cfbX_init(WPMINFO2) {
ACCESS_FBINFO(fbops).fb_copyarea = cfb_copyarea;
ACCESS_FBINFO(fbops).fb_fillrect = cfb_fillrect;
ACCESS_FBINFO(fbops).fb_imageblit = cfb_imageblit;
- ACCESS_FBINFO(fbops).fb_cursor = soft_cursor;
+ ACCESS_FBINFO(fbops).fb_cursor = NULL;
accel = (ACCESS_FBINFO(fbcon).var.accel_flags & FB_ACCELF_TEXT) == FB_ACCELF_TEXT;
diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c
--- a/drivers/video/matrox/matroxfb_crtc2.c
+++ b/drivers/video/matrox/matroxfb_crtc2.c
@@ -576,7 +576,6 @@ static struct fb_ops matroxfb_dh_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
static struct fb_var_screeninfo matroxfb_dh_defined = {
diff --git a/drivers/video/maxinefb.c b/drivers/video/maxinefb.c
--- a/drivers/video/maxinefb.c
+++ b/drivers/video/maxinefb.c
@@ -113,7 +113,6 @@ static struct fb_ops maxinefb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
int __init maxinefb_init(void)
diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c
--- a/drivers/video/neofb.c
+++ b/drivers/video/neofb.c
@@ -1665,7 +1665,6 @@ static struct fb_ops neofb_ops = {
.fb_fillrect = neofb_fillrect,
.fb_copyarea = neofb_copyarea,
.fb_imageblit = neofb_imageblit,
- .fb_cursor = soft_cursor,
};
/* --------------------------------------------------------------------- */
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/nvidia/nvidia.c
@@ -1425,7 +1425,7 @@ static int __devinit nvidia_set_fbinfo(s
info->pixmap.flags = FB_PIXMAP_SYSTEM;
if (!hwcur)
- info->fbops->fb_cursor = soft_cursor;
+ info->fbops->fb_cursor = NULL;
info->var.accel_flags = (!noaccel);
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -85,7 +85,6 @@ static struct fb_ops offb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
/*
diff --git a/drivers/video/p9100.c b/drivers/video/p9100.c
--- a/drivers/video/p9100.c
+++ b/drivers/video/p9100.c
@@ -48,7 +48,6 @@ static struct fb_ops p9100_ops = {
.fb_imageblit = cfb_imageblit,
.fb_mmap = p9100_mmap,
.fb_ioctl = p9100_ioctl,
- .fb_cursor = soft_cursor,
};
/* P9100 control registers */
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -109,7 +109,6 @@ static struct fb_ops platinumfb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
/*
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -1034,7 +1034,6 @@ static struct fb_ops pm2fb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
/*
diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/pmag-ba-fb.c
--- a/drivers/video/pmag-ba-fb.c
+++ b/drivers/video/pmag-ba-fb.c
@@ -128,7 +128,6 @@ static struct fb_ops pmagbafb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/pmagb-b-fb.c
--- a/drivers/video/pmagb-b-fb.c
+++ b/drivers/video/pmagb-b-fb.c
@@ -132,7 +132,6 @@ static struct fb_ops pmagbbfb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -230,7 +230,6 @@ static struct fb_ops pvr2fb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
static struct fb_videomode pvr2_modedb[] __initdata = {
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -418,7 +418,6 @@ static struct fb_ops pxafb_ops = {
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_blank = pxafb_blank,
- .fb_cursor = soft_cursor,
.fb_mmap = pxafb_mmap,
};
diff --git a/drivers/video/q40fb.c b/drivers/video/q40fb.c
--- a/drivers/video/q40fb.c
+++ b/drivers/video/q40fb.c
@@ -83,7 +83,6 @@ static struct fb_ops q40fb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
static int __init q40fb_probe(struct device *device)
diff --git a/drivers/video/radeonfb.c b/drivers/video/radeonfb.c
--- a/drivers/video/radeonfb.c
+++ b/drivers/video/radeonfb.c
@@ -2218,7 +2218,6 @@ static struct fb_ops radeonfb_ops = {
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
#endif
- .fb_cursor = soft_cursor,
};
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -388,7 +388,6 @@ static struct fb_ops s1d13xxxfb_fbops =
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor
};
static int s1d13xxxfb_width_tab[2][4] __devinitdata = {
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -494,7 +494,6 @@ static struct fb_ops s3c2410fb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -853,7 +853,6 @@ static struct fb_ops sa1100fb_ops = {
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_blank = sa1100fb_blank,
- .fb_cursor = soft_cursor,
.fb_mmap = sa1100fb_mmap,
};
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -1470,7 +1470,6 @@ static struct fb_ops savagefb_ops = {
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
#endif
- .fb_cursor = soft_cursor,
};
/* --------------------------------------------------------------------- */
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
--- a/drivers/video/sgivwfb.c
+++ b/drivers/video/sgivwfb.c
@@ -124,7 +124,6 @@ static struct fb_ops sgivwfb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
.fb_mmap = sgivwfb_mmap,
};
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -2002,7 +2002,9 @@ static struct fb_ops sisfb_ops = {
.fb_fillrect = fbcon_sis_fillrect,
.fb_copyarea = fbcon_sis_copyarea,
.fb_imageblit = cfb_imageblit,
+#ifdef CONFIG_FB_SOFT_CURSOR
.fb_cursor = soft_cursor,
+#endif
.fb_sync = fbcon_sis_sync,
#ifdef SIS_NEW_CONFIG_COMPAT
.fb_compat_ioctl= sisfb_compat_ioctl,
diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c
--- a/drivers/video/skeletonfb.c
+++ b/drivers/video/skeletonfb.c
@@ -457,11 +457,8 @@ void xxxfb_imageblit(struct fb_info *p,
}
/**
- * xxxfb_cursor - REQUIRED function. If your hardware lacks support
- * for a cursor you can use the default cursor whose
- * function is called soft_cursor. It will always
- * work since it uses xxxfb_imageblit function which
- * is required.
+ * xxxfb_cursor - OPTIONAL. If your hardware lacks support
+ * for a cursor, leave this field NULL.
*
* @info: frame buffer structure that represents a single frame buffer
* @cursor: structure defining the cursor to draw.
@@ -663,7 +660,7 @@ static struct fb_ops xxxfb_ops = {
.fb_fillrect = xxxfb_fillrect, /* Needed !!! */
.fb_copyarea = xxxfb_copyarea, /* Needed !!! */
.fb_imageblit = xxxfb_imageblit, /* Needed !!! */
- .fb_cursor = xxxfb_cursor, /* Needed !!! */
+ .fb_cursor = xxxfb_cursor, /* Optional !!! */
.fb_rotate = xxxfb_rotate,
.fb_poll = xxxfb_poll,
.fb_sync = xxxfb_sync,
diff --git a/drivers/video/softcursor.c b/drivers/video/softcursor.c
--- a/drivers/video/softcursor.c
+++ b/drivers/video/softcursor.c
@@ -1,72 +0,0 @@
-/*
- * linux/drivers/video/softcursor.c -- Generic software cursor for frame buffer devices
- *
- * Created 14 Nov 2002 by James Simmons
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/tty.h>
-#include <linux/fb.h>
-#include <linux/slab.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-int soft_cursor(struct fb_info *info, struct fb_cursor *cursor)
-{
- unsigned int scan_align = info->pixmap.scan_align - 1;
- unsigned int buf_align = info->pixmap.buf_align - 1;
- unsigned int i, size, dsize, s_pitch, d_pitch;
- struct fb_image *image;
- u8 *dst, *src;
-
- if (info->state != FBINFO_STATE_RUNNING)
- return 0;
-
- s_pitch = (cursor->image.width + 7) >> 3;
- dsize = s_pitch * cursor->image.height;
-
- src = kmalloc(dsize + sizeof(struct fb_image), GFP_ATOMIC);
- if (!src)
- return -ENOMEM;
-
- image = (struct fb_image *) (src + dsize);
- *image = cursor->image;
- d_pitch = (s_pitch + scan_align) & ~scan_align;
-
- size = d_pitch * image->height + buf_align;
- size &= ~buf_align;
- dst = fb_get_buffer_offset(info, &info->pixmap, size);
-
- if (cursor->enable) {
- switch (cursor->rop) {
- case ROP_XOR:
- for (i = 0; i < dsize; i++)
- src[i] = image->data[i] ^ cursor->mask[i];
- break;
- case ROP_COPY:
- default:
- for (i = 0; i < dsize; i++)
- src[i] = image->data[i] & cursor->mask[i];
- break;
- }
- } else
- memcpy(src, image->data, dsize);
-
- fb_pad_aligned_buffer(dst, d_pitch, src, s_pitch, image->height);
- image->data = dst;
- info->fbops->fb_imageblit(info, image);
- kfree(src);
- return 0;
-}
-
-EXPORT_SYMBOL(soft_cursor);
-
-MODULE_AUTHOR("James Simmons <jsimmons@users.sf.net>");
-MODULE_DESCRIPTION("Generic software cursor");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -1382,7 +1382,6 @@ static struct fb_ops sstfb_ops = {
.fb_fillrect = cfb_fillrect, /* sstfb_fillrect */
.fb_copyarea = cfb_copyarea, /* sstfb_copyarea */
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
.fb_ioctl = sstfb_ioctl,
};
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -1147,7 +1147,6 @@ static struct fb_ops stifb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
diff --git a/drivers/video/tcx.c b/drivers/video/tcx.c
--- a/drivers/video/tcx.c
+++ b/drivers/video/tcx.c
@@ -52,7 +52,6 @@ static struct fb_ops tcx_ops = {
.fb_imageblit = cfb_imageblit,
.fb_mmap = tcx_mmap,
.fb_ioctl = tcx_ioctl,
- .fb_cursor = soft_cursor,
};
/* THC definitions */
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -184,7 +184,6 @@ static struct fb_ops tdfxfb_ops = {
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
#endif
- .fb_cursor = soft_cursor,
};
/*
diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c
--- a/drivers/video/tgafb.c
+++ b/drivers/video/tgafb.c
@@ -63,7 +63,6 @@ static struct fb_ops tgafb_ops = {
.fb_fillrect = tgafb_fillrect,
.fb_copyarea = tgafb_copyarea,
.fb_imageblit = tgafb_imageblit,
- .fb_cursor = soft_cursor,
};
diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -1293,7 +1293,6 @@ static struct fb_ops tridentfb_ops = {
.fb_fillrect = tridentfb_fillrect,
.fb_copyarea= tridentfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
module_init(tridentfb_init);
diff --git a/drivers/video/tx3912fb.c b/drivers/video/tx3912fb.c
--- a/drivers/video/tx3912fb.c
+++ b/drivers/video/tx3912fb.c
@@ -89,7 +89,6 @@ static struct fb_ops tx3912fb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
static int tx3912fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
diff --git a/drivers/video/valkyriefb.c b/drivers/video/valkyriefb.c
--- a/drivers/video/valkyriefb.c
+++ b/drivers/video/valkyriefb.c
@@ -135,7 +135,6 @@ static struct fb_ops valkyriefb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
/* Sets the video mode according to info->var */
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -213,7 +213,6 @@ static struct fb_ops vesafb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
static int __init vesafb_setup(char *options)
diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c
--- a/drivers/video/vfb.c
+++ b/drivers/video/vfb.c
@@ -90,7 +90,6 @@ static struct fb_ops vfb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
.fb_mmap = vfb_mmap,
};
diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/vga16fb.c
@@ -1326,7 +1326,6 @@ static struct fb_ops vga16fb_ops = {
.fb_fillrect = vga16fb_fillrect,
.fb_copyarea = vga16fb_copyarea,
.fb_imageblit = vga16fb_imageblit,
- .fb_cursor = soft_cursor,
};
#ifndef MODULE
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -397,7 +397,6 @@ static struct fb_ops w100fb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = soft_cursor,
};
#ifdef CONFIG_PM
diff --git a/include/linux/fb.h b/include/linux/fb.h
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -810,7 +810,6 @@ struct fb_info {
extern int fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var);
extern int fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var);
extern int fb_blank(struct fb_info *info, int blank);
-extern int soft_cursor(struct fb_info *info, struct fb_cursor *cursor);
extern void cfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
extern void cfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
extern void cfb_imageblit(struct fb_info *info, const struct fb_image *image);
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-10-18 20:42 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-10-18 9:13 [PATCH 1/17] fbcon/fbdev: Move softcursor out of fbdev to fbcon Antonino A. Daplas
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.