From: Bram Stolk <bram@sara.nl>
To: linux-kernel@vger.kernel.org
Subject: assertion failure in libata-core
Date: Fri, 28 Oct 2005 12:40:29 +0200 [thread overview]
Message-ID: <4362001D.1070004@sara.nl> (raw)
Hi,
When enabling atapi, I got the following assertion failure:
Assertion failed! qc->flags &
ATA_QCFLAG_ACTIVE,drivers/scsi/libata-core.c,ata_qc_complete,line=3232
This is when booting my 2.6.14-rc5 kernel with two sata devices:
a maxtor hd, and a plextor dvd writer.
Bram
-------------------------------------
Some context for the failure:
ata1: SATA max UDMA/133 cmd 0xF8806100 ctl 0x0 bmdma 0x0 irq 19
ata2: SATA max UDMA/133 cmd 0xF8806180 ctl 0x0 bmdma 0x0 irq 19
ata3: SATA max UDMA/133 cmd 0xF8806200 ctl 0x0 bmdma 0x0 irq 19
ata4: SATA max UDMA/133 cmd 0xF8806280 ctl 0x0 bmdma 0x0 irq 19
ata1: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:001f
ata1: dev 0 ATAPI, max UDMA/66
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/66
scsi0 : ahci
ata2: no device found (phy stat 00000000)
scsi1 : ahci
ata3: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:007f
ata3: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
ata3: dev 0 configured for UDMA/133
scsi2 : ahci
ata4: no device found (phy stat 00000000)
scsi3 : ahci
Vendor: PLEXTOR Model: DVDR PX-716A Rev: 1.07
Type: CD-ROM ANSI SCSI revision: 05
ata1: error occurred, port reset
ata1: error occurred, port reset
Assertion failed! qc->flags &
ATA_QCFLAG_ACTIVE,drivers/scsi/libata-core.c,ata_qc_complete,line=3232
0:0:0:0: timing out command, waited 18s
0:0:0:0: timing out command, waited 18s
Vendor: ATA Model: Maxtor 6L250S0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 > sda3
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
sr 0:0:0:0: timing out command, waited 90s
sr 0:0:0:0: timing out command, waited 90s
sr 0:0:0:0: timing out command, waited 90s
sr 0:0:0:0: timing out command, waited 90s
sr 0:0:0:0: timing out command, waited 90s
sr 0:0:0:0: timing out command, waited 90s
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
next reply other threads:[~2005-10-28 10:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-28 10:40 Bram Stolk [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-10-29 17:09 assertion failure in libata-core Bram Stolk
2005-10-29 17:27 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4362001D.1070004@sara.nl \
--to=bram@sara.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.