From: Jeff Garzik <jgarzik@pobox.com>
To: Bram Stolk <bram@sara.nl>
Cc: linux-ide@vger.kernel.org
Subject: Re: assertion failure in libata-core
Date: Sat, 29 Oct 2005 13:27:35 -0400 [thread overview]
Message-ID: <4363B107.2080209@pobox.com> (raw)
In-Reply-To: <4363ACDE.1060408@sara.nl>
Bram Stolk wrote:
> Hello,
>
>
> I've been trying very hard to get my sata dvd burner to work.
> It is a plextor PX-716SA.
>
> I tried the following kernels:
>
> linux-2.6.14-rc5
> linux-2.6.14
> linux-2.6.14-rc5-mm1 (contains sil24 support)
>
> All with the same result: assertion failure.
>
> Assertion failed! qc->flags &
> ATA_QCFLAG_ACTIVE,drivers/scsi/libata-core.c,ata_qc_complete,line=3232
>
> Now, my board has 2 sata interfaces: one from intel,
> and one from Sillicon Image.
>
> If I use libata.atapi_enabled=1 and connect the drive to the
> intel sata, I get the assertion mentioned above.
>
> If I connect the drive to the sil sata, it is not detected,
> and I get this error:
> sata_sil24 version 0.22
> ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:05:00.0 to 64
> ata5: SATA max UDMA/100 cmd 0xF8838000 ctl 0x0 bmdma 0x0 irq 19
> ata6: SATA max UDMA/100 cmd 0xF883A000 ctl 0x0 bmdma 0x0 irq 19
> ata5: no device found (phy stat 00000000)
> scsi4 : sata_sil24
> sata_sil24 ata6: error interrupt on port1
> stat=0x80000001 irq=0xb60002 cmd_err=1 sstatus=0x113 serror=0x0
> sata_sil24 ata6: resetting controller...
> scsi5 : sata_sil24
>
> How can I use this SATA DVD drive under linux on sata-ahci or sata-sil24?
Wait until we fix ATAPI, alas....
Your feedback here helps, though.
Jeff
next prev parent reply other threads:[~2005-10-29 17:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-29 17:09 assertion failure in libata-core Bram Stolk
2005-10-29 17:27 ` Jeff Garzik [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-10-28 10:40 Bram Stolk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4363B107.2080209@pobox.com \
--to=jgarzik@pobox.com \
--cc=bram@sara.nl \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.