* [PATCH 02/37] dvb: add support for Technotrend Budget Card S1500
@ 2005-11-01 8:12 Michael Krufky
0 siblings, 0 replies; only message in thread
From: Michael Krufky @ 2005-11-01 8:12 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, linux-dvb-maintainer
[-- Attachment #1: Type: text/plain, Size: 2 bytes --]
[-- Attachment #2: 2357.patch --]
[-- Type: text/x-patch, Size: 6429 bytes --]
From: Martin Zwickel <martin.zwickel@technotrend.de>
This patch adds support for the Technotrend Budget Card S1500
with a BSBE1 frontend and the LNBP21.
Signed-off-by: Martin Zwickel <martin.zwickel@technotrend.de>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
drivers/media/dvb/ttpci/budget.c | 118 +++++++++++++++++++++++++++++++++++----
1 file changed, 108 insertions(+), 10 deletions(-)
--- linux-2.6.14-git3.orig/drivers/media/dvb/ttpci/budget.c
+++ linux-2.6.14-git3/drivers/media/dvb/ttpci/budget.c
@@ -226,12 +226,14 @@
return 0;
}
-static void lnbp21_init(struct budget* budget)
+static int lnbp21_init(struct budget* budget)
{
u8 buf = 0x00;
struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = &buf, .len = sizeof(buf) };
- i2c_transfer (&budget->i2c_adap, &msg, 1);
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
}
static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
@@ -273,7 +275,7 @@
0x01, 0x15,
0x02, 0x00,
0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
0x06, 0x40, /* DAC not used, set to high impendance mode */
0x07, 0x00, /* DAC LSB */
@@ -367,6 +369,80 @@
.pll_set = alps_bsru6_pll_set,
};
+static u8 alps_bsbe1_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
+ 0x06, 0x40, /* DAC not used, set to high impendance mode */
+ 0x07, 0x00, /* DAC LSB */
+ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
+ 0x09, 0x00, /* FIFO */
+ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
+ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
+ 0x10, 0x3f, // AGC2 0x3d
+ 0x11, 0x84,
+ 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
+ 0x15, 0xc9, // lock detector threshold
+ 0x16, 0x00,
+ 0x17, 0x00,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
+ 0x29, 0x1e, // 1/2 threshold
+ 0x2a, 0x14, // 2/3 threshold
+ 0x2b, 0x0f, // 3/4 threshold
+ 0x2c, 0x09, // 5/6 threshold
+ 0x2d, 0x05, // 7/8 threshold
+ 0x2e, 0x01,
+ 0x31, 0x1f, // test all FECs
+ 0x32, 0x19, // viterbi and synchro search
+ 0x33, 0xfc, // rs control
+ 0x34, 0x93, // error control
+ 0x0f, 0x92, // 0x80 = inverse AGC
+ 0xff, 0xff
+};
+
+static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
+{
+ int ret;
+ u8 data[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ if ((params->frequency < 950000) || (params->frequency > 2150000))
+ return -EINVAL;
+
+ div = (params->frequency + (125 - 1)) / 125; // round correctly
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+ data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
+
+ ret = i2c_transfer(i2c, &msg, 1);
+ return (ret != 1) ? -EIO : 0;
+}
+
+static struct stv0299_config alps_bsbe1_config = {
+ .demod_address = 0x68,
+ .inittab = alps_bsbe1_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .enhanced_tuning = 0,
+ .skip_reinit = 0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = alps_bsru6_set_symbol_rate,
+ .pll_set = alps_bsbe1_pll_set,
+};
+
static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct budget* budget = (struct budget*) fe->dvb->priv;
@@ -500,6 +576,19 @@
static void frontend_init(struct budget *budget)
{
switch(budget->dev->pci->subsystem_device) {
+ case 0x1017:
+ // try the ALPS BSBE1 now
+ budget->dvb_frontend = stv0299_attach(&alps_bsbe1_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage;
+ budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
+ if (lnbp21_init(budget)) {
+ printk("%s: No LNBP21 found!\n", __FUNCTION__);
+ goto error_out;
+ }
+ }
+
+ break;
case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
case 0x1013:
// try the ALPS BSRV2 first of all
@@ -554,7 +643,10 @@
if (budget->dvb_frontend) {
budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage;
budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
- lnbp21_init(budget);
+ if (lnbp21_init(budget)) {
+ printk("%s: No LNBP21 found!\n", __FUNCTION__);
+ goto error_out;
+ }
break;
}
}
@@ -566,13 +658,17 @@
budget->dev->pci->subsystem_vendor,
budget->dev->pci->subsystem_device);
} else {
- if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) {
- printk("budget: Frontend registration failed!\n");
- if (budget->dvb_frontend->ops->release)
- budget->dvb_frontend->ops->release(budget->dvb_frontend);
- budget->dvb_frontend = NULL;
- }
+ if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend))
+ goto error_out;
}
+ return;
+
+error_out:
+ printk("budget: Frontend registration failed!\n");
+ if (budget->dvb_frontend->ops->release)
+ budget->dvb_frontend->ops->release(budget->dvb_frontend);
+ budget->dvb_frontend = NULL;
+ return;
}
static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
@@ -618,6 +714,7 @@
static struct saa7146_extension budget_extension;
+MAKE_BUDGET_INFO(ttbs2, "TT-Budget/WinTV-NOVA-S PCI (rev AL/alps bsbe1 lnbp21 frontend)", BUDGET_TT);
MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT);
MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT);
MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
@@ -630,6 +727,7 @@
MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004),
MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005),
MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
+ MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016),
MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-11-01 8:13 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-11-01 8:12 [PATCH 02/37] dvb: add support for Technotrend Budget Card S1500 Michael Krufky
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.