* [U-Boot-Users] slow memory running from flash.
@ 2005-11-04 14:16 David Updegraff
0 siblings, 0 replies; only message in thread
From: David Updegraff @ 2005-11-04 14:16 UTC (permalink / raw)
To: u-boot
Hi.
I have an MPC8343 that runs its memory _VERY_ slowly when I run code
from flash. Identical u-boot code loaded into RAM and run from there is
fine, and 10x or more faster for memcopy and dma_xfer. I.e. the IMMBAR
setup registers for memory are identical. Eg. the 'relocate_code()'
routine takes 5 seconds if i am running from flash, but negligible time
if running from RAM.
The only difference in u-boot code is that when running from ram, the
remap_flash_by_XYZ games in start.S are not played. All dcache issues
are the same either way.
I wonder if anyone has a clue for me about why this might be?
-dbu.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-11-04 14:16 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-11-04 14:16 [U-Boot-Users] slow memory running from flash David Updegraff
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.