Re: [LARTC] Cannot get htb & prio working together.

[Michael Davidson <michael@bbd.co.za>]

Hi
    Many thanks. Filtering at sub-qdisc and the correct use of the "tc 
filter show" command was where I was coming short,  I'm flying now.

Thanks again, Mike D.


Jody Shumaker wrote:

> Michael Davidson wrote:
>
>> Hi,
>>
>> I've tried the multi tier filtering as suggested, but It didn't do 
>> the trick unfortunately. The filters were accepted at the command 
>> line but when but when I do  "tc -s -d filter show dev eth0" the only 
>> filters displayed are those with "root" as the parent. Below is my 
>> current script.
>>
> That's because that command defaults to showing the root unless you 
> tell it what to look at.
>
> tc -s -d filter show dev eth0 parent 20:
>
> A simple tc filter help lists that.
>
> - Jody
>

-- 

 Regards Mike.

 Michael Davidson
 Barone Budge & Dominick
 Email: michael@bbd.co.za
 Office: +27 11 532 8380
 BB&D :  +27 11 532 8300
 Fax:    +27 11 532 8400
 Mobile: +27 82 650 5707
 Home:   +27 11 452 4423	

 This e-mail is confidential and subject to the disclaimer published at
 http://www.bbd.co.za


_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc