* [lm-sensors] Re:87431 further information
@ 2005-10-30 15:24 Schäfer Raumgestaltung
0 siblings, 0 replies; 2+ messages in thread
From: Schäfer Raumgestaltung @ 2005-10-30 15:24 UTC (permalink / raw)
To: lm-sensors
Hi Mark,
a little Update:
registering bmcsensors.o seemed to be ok.... but
after ending up with message
-> registered 5 temp, 10 volt, 0 current, 5 fan sensors
-> bmcsensors thread done
long time later !
DMESG shows up
-> Error 0xcb on cmd 0x4/0x2d; state = 4; probably fatal
hth
Uli
^ permalink raw reply [flat|nested] 2+ messages in thread
* [lm-sensors] Re:87431 further information
@ 2005-11-07 23:46 Mark Studebaker
0 siblings, 0 replies; 2+ messages in thread
From: Mark Studebaker @ 2005-11-07 23:46 UTC (permalink / raw)
To: lm-sensors
Sch?fer Raumgestaltung wrote:
> Hi Mark,
>
> a little Update:
>
> registering bmcsensors.o seemed to be ok.... but
>
> after ending up with message
>
> -> registered 5 temp, 10 volt, 0 current, 5 fan sensors
> -> bmcsensors thread done
>
> long time later !
> DMESG shows up
>
> -> Error 0xcb on cmd 0x4/0x2d; state = 4; probably fatal
>
> hth
>
> Uli
>
hmm that means "requested sensor, data, or record not present",
while reading the sensor value. Never seen that one before.
Actually it doesn't look like it would be fatal...
did the voltage readings continue to work?
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-11-07 23:46 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-11-07 23:46 [lm-sensors] Re:87431 further information Mark Studebaker
-- strict thread matches above, loose matches on Subject: below --
2005-10-30 15:24 Schäfer Raumgestaltung
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.