* [FORWARED PATCH] pci-usb suspend fix (was: 2.6.14-git4 suspend fails: kernel NULL pointer dereference)
@ 2005-11-08 16:36 Patrizio Bassi
0 siblings, 0 replies; only message in thread
From: Patrizio Bassi @ 2005-11-08 16:36 UTC (permalink / raw)
To: pavel; +Cc: shaohua.li, Kernel, , akpm, stern
I'm sorry i had some problems with hd, but could recover the patch.
NOTICE:
patch is by Alan Stern and not Len Brown (as i told in previous mails)
Alan told me the problem is with usb controllorer not supporting suspend
functions.
i'm not the author, it's forwarded only.
Sorry for problems and email flood.
Patrizio Bassi
--- a/drivers/usb/core/hcd-pci.c Tue Sep 13 13:06:21 2005
+++ b/drivers/usb/core/hcd-pci.c Sat Sep 24 10:30:56 2005
@@ -232,6 +232,10 @@
hcd->state = HC_STATE_SUSPENDED;
/* FALLTHROUGH */
+ /* entry for controllers that have died and been reset */
+ case HC_STATE_HALT:
+ /* FALLTHROUGH */
+
/* entry with CONFIG_USB_SUSPEND, or hcds that autosuspend: the
* controller and/or root hub will already have been suspended,
* but it won't be ready for a PCI resume call.
@@ -259,11 +263,20 @@
*/
retval = pci_set_power_state (dev, PCI_D3hot);
if (retval == 0) {
+ int rc;
+ int wakeup = hcd->remote_wakeup;
+
dev_dbg (hcd->self.controller, "--> PCI D3\n");
- retval = pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup);
- if (retval)
- break;
- retval = pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup);
+ rc = pci_enable_wake (dev, PCI_D3hot, wakeup);
+ if (rc && wakeup)
+ dev_warn(&dev->dev, "Unable to activate "
+ "remote wakeup from %d: %d\n",
+ PCI_D3hot, rc);
+ rc = pci_enable_wake (dev, PCI_D3cold, wakeup);
+ if (rc && wakeup)
+ dev_warn(&dev->dev, "Unable to activate "
+ "remote wakeup from %d: %d\n",
+ PCI_D3cold, rc);
} else if (retval < 0) {
dev_dbg (&dev->dev, "PCI D3 suspend fail, %d\n",
retval);
@@ -298,7 +311,8 @@
int retval;
hcd = pci_get_drvdata(dev);
- if (hcd->state != HC_STATE_SUSPENDED) {
+ if (hcd->state != HC_STATE_SUSPENDED &&
+ hcd->state != HC_STATE_HALT) {
dev_dbg (hcd->self.controller,
"can't resume, not suspended!\n");
return 0;
@@ -312,6 +326,7 @@
#ifdef DEBUG
int pci_pm;
u16 pmcr;
+ int rc;
pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
@@ -337,19 +352,17 @@
dev->current_state);
}
#endif
- retval = pci_enable_wake (dev, dev->current_state, 0);
- if (retval) {
- dev_err(hcd->self.controller,
- "can't enable_wake to %d, %d!\n",
- dev->current_state, retval);
- return retval;
- }
- retval = pci_enable_wake (dev, PCI_D3cold, 0);
- if (retval) {
- dev_err(hcd->self.controller,
- "can't enable_wake to %d, %d!\n",
- PCI_D3cold, retval);
- return retval;
+ rc = pci_enable_wake (dev, dev->current_state, 0);
+ if (rc)
+ dev_warn(hcd->self.controller,
+ "can't disable wake from %d, %d!\n",
+ dev->current_state, rc);
+ if (dev->current_state != PCI_D3cold) {
+ rc = pci_enable_wake (dev, PCI_D3cold, 0);
+ if (rc)
+ dev_warn(hcd->self.controller,
+ "can't disable wake from %d, %d!\n",
+ PCI_D3cold, rc);
}
} else {
/* Same basic cases: clean (powered/not), dirty */
@@ -372,7 +385,8 @@
dev->dev.power.power_state = PMSG_ON;
- hcd->state = HC_STATE_RESUMING;
+ if (hcd->state == HC_STATE_SUSPENDED)
+ hcd->state = HC_STATE_RESUMING;
hcd->saw_irq = 0;
retval = request_irq (dev->irq, usb_hcd_irq, SA_SHIRQ,
hcd->irq_descr, hcd);
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-11-08 16:36 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-11-08 16:36 [FORWARED PATCH] pci-usb suspend fix (was: 2.6.14-git4 suspend fails: kernel NULL pointer dereference) Patrizio Bassi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.