From: Andres Meyer <andres.meyer@computer.org>
To: linux-ide@vger.kernel.org
Subject: Marvell SATA 5081 success
Date: Sun, 20 Nov 2005 14:18:14 +0100 [thread overview]
Message-ID: <43807796.4090002@computer.org> (raw)
Just wanted to confirm that my Highpoint 1820 (PCI-X) works fine with
2x300GB disks on a dual Opteron, 2.6.15-rc2 x86_64 with 4GB RAM. I have
been constantly compiling kernels and transferring files for 12h now
without a problem.
Thx a lot,
Andres
lspci:
0000:02:04.0 SCSI storage controller: Marvell Technology Group Ltd.
MV88SX5081 8-port SATA I PCI-X Controller
dmesg:
libata version 1.20 loaded.
sata_mv 0000:02:04.0: version 0.5
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 25 (level, low) -> IRQ 21
sata_mv 0000:02:04.0: 32 slots 8 ports SCSI mode IRQ via INTx
ata1: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003A2120 bmdma 0x0 irq 21
ata2: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003A4120 bmdma 0x0 irq 21
ata3: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003A6120 bmdma 0x0 irq 21
ata4: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003A8120 bmdma 0x0 irq 21
ata5: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003B2120 bmdma 0x0 irq 21
ata6: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003B4120 bmdma 0x0 irq 21
ata7: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003B6120 bmdma 0x0 irq 21
ata8: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003B8120 bmdma 0x0 irq 21
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023
88:207f
ata1: dev 0 ATA-7, max UDMA/133, 586072368 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_mv
ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063
88:007f
ata2: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_mv
ata3: no device found (phy stat 00000000)
scsi2 : sata_mv
ata4: no device found (phy stat 00000000)
scsi3 : sata_mv
ata5: no device found (phy stat 00000000)
scsi4 : sata_mv
ata6: no device found (phy stat 00000000)
scsi5 : sata_mv
ata7: no device found (phy stat 00000000)
scsi6 : sata_mv
ata8: no device found (phy stat 00000000)
scsi7 : sata_mv
Vendor: ATA Model: ST3300831AS Rev: 3.01
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
SCSI device sda: drive cache: write back
sda: sda1
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Vendor: ATA Model: Maxtor 6L300S0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 < sdb5 >
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
SCSI device sda: drive cache: write back
sda:
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
SCSI device sda: drive cache: write back
sda:
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
SCSI device sda: drive cache: write back
sda: sda1 < sda5 >
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
SCSI device sda: drive cache: write back
sda: sda1 < sda5 >
reply other threads:[~2005-11-20 14:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43807796.4090002@computer.org \
--to=andres.meyer@computer.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.