Marvell SATA 5081 success

Marvell SATA 5081 success

[Andres Meyer]

Just wanted to confirm that my Highpoint 1820 (PCI-X)  works fine with 
2x300GB disks on  a dual Opteron, 2.6.15-rc2 x86_64 with 4GB RAM. I have 
been constantly compiling kernels and transferring files for 12h now 
without a problem.

Thx a lot,
Andres

lspci:
0000:02:04.0 SCSI storage controller: Marvell Technology Group Ltd. 
MV88SX5081 8-port SATA I PCI-X Controller

dmesg:
libata version 1.20 loaded.
sata_mv 0000:02:04.0: version 0.5
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 25 (level, low) -> IRQ 21
sata_mv 0000:02:04.0: 32 slots 8 ports SCSI mode IRQ via INTx
ata1: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003A2120 bmdma 0x0 irq 21
ata2: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003A4120 bmdma 0x0 irq 21
ata3: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003A6120 bmdma 0x0 irq 21
ata4: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003A8120 bmdma 0x0 irq 21
ata5: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003B2120 bmdma 0x0 irq 21
ata6: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003B4120 bmdma 0x0 irq 21
ata7: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003B6120 bmdma 0x0 irq 21
ata8: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC200003B8120 bmdma 0x0 irq 21
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 
88:207f
ata1: dev 0 ATA-7, max UDMA/133, 586072368 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_mv
ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 
88:007f
ata2: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_mv
ata3: no device found (phy stat 00000000)
scsi2 : sata_mv
ata4: no device found (phy stat 00000000)
scsi3 : sata_mv
ata5: no device found (phy stat 00000000)
scsi4 : sata_mv
ata6: no device found (phy stat 00000000)
scsi5 : sata_mv
ata7: no device found (phy stat 00000000)
scsi6 : sata_mv
ata8: no device found (phy stat 00000000)
scsi7 : sata_mv
  Vendor: ATA       Model: ST3300831AS       Rev: 3.01
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
SCSI device sda: drive cache: write back
 sda: sda1
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
  Vendor: ATA       Model: Maxtor 6L300S0    Rev: BANC
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB)
SCSI device sdb: drive cache: write back
 sdb: sdb1 < sdb5 >
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
SCSI device sda: drive cache: write back
 sda:
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
SCSI device sda: drive cache: write back
 sda:
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
SCSI device sda: drive cache: write back
 sda: sda1 < sda5 >
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
SCSI device sda: drive cache: write back
 sda: sda1 < sda5 >