re: Is there some articles discussing how to change bare-board code to linux driver?

re: Is there some articles discussing how to change bare-board code to linux driver?

[T Ziomek]

>    Where can i find them?thanks.

In addition to LDD3 (for 2.6 kernels, or the freely available LDD2 for 2.4 
kernels), you might want to look at some existing Linux drivers that are
based on "bare metal" / "no OS" drivers.  The ones I know of are for Xilinx
peripherals, for example (within the Linux kernel tree),
- ./drivers/net/xilinx_enet
- ./drivers/char/xilinx_uartlite
- ./drivers/char/xilinx_gpio

Tom
-- 
   /"\  ASCII Ribbon Campaign   |
   \ /                          |   Email to user 'CTZ001'
    X        Against HTML       |             at 'email.mot.com'
   / \     in e-mail & news     |

Re: Is there some articles discussing how to change bare-board code to linux driver?

[David H. Lynch Jr]

Where can I find the ./drivers/net/xilinx_enet, ... etc files.
I can not find them in the 2.6.14.2 tree

T Ziomek wrote:
>>    Where can i find them?thanks.
>
> In addition to LDD3 (for 2.6 kernels, or the freely available LDD2 for 
> 2.4 kernels), you might want to look at some existing Linux drivers 
> that are
> based on "bare metal" / "no OS" drivers.  The ones I know of are for 
> Xilinx
> peripherals, for example (within the Linux kernel tree),
> - ./drivers/net/xilinx_enet
> - ./drivers/char/xilinx_uartlite
> - ./drivers/char/xilinx_gpio
>
> Tom

Re: Is there some articles discussing how to change bare-board code to linux driver?

[Andrei Konovalov]

David H. Lynch Jr wrote:
> Where can I find the ./drivers/net/xilinx_enet, ... etc files.
> I can not find them in the 2.6.14.2 tree

They are in the linuxppc-2.4 tree. Try
rsync -avz --delete source.mvista.com::linuxppc-2.4 <directory>

-- Andrei

> T Ziomek wrote:
> 
>>>    Where can i find them?thanks.
>>
>>
>> In addition to LDD3 (for 2.6 kernels, or the freely available LDD2 for 
>> 2.4 kernels), you might want to look at some existing Linux drivers 
>> that are
>> based on "bare metal" / "no OS" drivers.  The ones I know of are for 
>> Xilinx
>> peripherals, for example (within the Linux kernel tree),
>> - ./drivers/net/xilinx_enet
>> - ./drivers/char/xilinx_uartlite
>> - ./drivers/char/xilinx_gpio
>>
>> Tom
> 
> 
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Is there some articles discussing how to change bare-board code to linux driver?

[zengshuai]

    Where can i find them?thanks.

------------------------------
我现在使用Sogou.com的2G邮箱了，你也来试试吧! 
http://mail.sogou.com/recommend/sogoumail_invite_reg1.jsp?from=sogouinvitation&s_EMAIL=zengshuai%40sogou.com&username=Linuxppc-embedded&FullName=Linuxppc-embedded&Email=Linuxppc-embedded%40ozlabs.org&verify=777667b18eda2b5dd1bbd47542afad9b

Re: Is there some articles discussing how to change bare-board code to linux driver?

[David H. Lynch Jr.]

zengshuai@sogou.com wrote:
>     Where can i find them?thanks.
>   
http://lwn.net/Kernel/LDD3/

also Googling works.
> ------------------------------
> 我现在使用Sogou.com的2G邮箱了，你也来试试吧! 
> http://mail.sogou.com/recommend/sogoumail_invite_reg1.jsp?from=sogouinvitation&s_EMAIL=zengshuai%40sogou.com&username=Linuxppc-embedded&FullName=Linuxppc-embedded&Email=Linuxppc-embedded%40ozlabs.org&verify=777667b18eda2b5dd1bbd47542afad9b
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
>