From: Leonardo Borda <borda@netwall.com.br>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Advanced Routing and Secondary ip address in eth0
Date: Wed, 21 Dec 2005 13:53:04 +0000 [thread overview]
Message-ID: <43A95E40.8020909@netwall.com.br> (raw)
In-Reply-To: <43A85B7A.90808@netwall.com.br>
[-- Attachment #1.1: Type: text/plain, Size: 2053 bytes --]
Hi gypsy,
Thank you for your help, but I have configured with succes Routing
for multiple uplinks/providers and it is working just fine.
My problem is when I have a secondary address range in one of these
cards (NICs), in my case eth0 (two ranges from the same internet provider ).
Anybody has a configuration like this?
- Eth0 ( two internet ranges address from the same router/provider )
- eth1 ( another ISP )
- eth2 LAN
??
Thanks in advanced.
gypsy escreveu:
>Leonardo Borda wrote:
>
>
>>Hello,
>>
>> I have configured advanced routing with success using three (03)
>>network adapters ( ETH0, ETH1 and ETH2).
>> Now I have to configure an addittion range in the same Interface
>>ETH0 ( another internet ip range address ), so I would like to have TWO
>>different ranges at the same ETHERNET CARD ( in this case ETH0 ) AND
>>having advanced routing running it.
>> I Did the same configurations as I already done it before and it is
>>not working. When testing through the secondary ip address the packets
>>get out from the wrong default gateway, however testing from primary
>>range I am able to route.
>>
>> Is it possible to do advanced routing having in the same Interface
>>TWO different ip range address?
>>
>> Somebody had done this somewhere?
>>
>>Thanks in advanced
>>
>>--
>>Atenciosamente,
>>
>>Leonardo Borda
>>
>>
>
>Leonardo,
>
>Have you Yahooed/googled this? IIRC, I came across several pages
>describing your desired setup while trying to decide how to deal with 3
>NICs and two different IPS (therefore separate nets on each NIC). Again
>IIRC, I rejected these because they were not the correct solution for
>me.
>
>Sorry I can't be more help, but I do think your solution is "out there".
>--
>gypsy
>
>
>
>
--
Atenciosamente,
Leonardo Borda - Diretor de Negócios
Netwall Tecnologia
Fone/Fax: +55 51 3388.3201
Celular: +55 51 8131.9740
mailto:borda@netwall.com.br - http://www.netwall.com.br
[-- Attachment #1.2: Type: text/html, Size: 2673 bytes --]
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
prev parent reply other threads:[~2005-12-21 13:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-20 19:28 [LARTC] Advanced Routing and Secondary ip address in eth0 Leonardo Borda
2005-12-21 4:50 ` gypsy
2005-12-21 7:29 ` Denis Ovsienko
2005-12-21 13:53 ` Leonardo Borda [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43A95E40.8020909@netwall.com.br \
--to=borda@netwall.com.br \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.