* [lm-sensors] Lmsensors and Asus CUSL2
2006-01-08 8:24 [lm-sensors] Lmsensors and Asus CUSL2 Michael Langlott
@ 2006-01-08 9:37 ` Rudolf Marek
2006-01-08 11:17 ` Michael Langlott
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Rudolf Marek @ 2006-01-08 9:37 UTC (permalink / raw)
To: lm-sensors
Michael Langlott wrote:
> Hi,
>
> i using the MB Asus CUSL2 and want to use Lmsensors with it, but he dont
> detect my chipset. Can u make support for my CHIPSET also so i can use it
> couse its a verrygood programm!
>
CUSL2 AS99127F Asus 1 Asus 2 (CUSL2)
sensors-detect should tell you. Please run it and put the output of this utillity somewhere if it does
not detect the AS99127F chip.
What version of lm-sensors are you using? And what kernel?
Thanks,
Regards
Rudolf
^ permalink raw reply [flat|nested] 5+ messages in thread* [lm-sensors] Lmsensors and Asus CUSL2
2006-01-08 8:24 [lm-sensors] Lmsensors and Asus CUSL2 Michael Langlott
2006-01-08 9:37 ` Rudolf Marek
@ 2006-01-08 11:17 ` Michael Langlott
2006-01-08 13:10 ` Rudolf Marek
2006-01-08 13:50 ` Rudolf Marek
3 siblings, 0 replies; 5+ messages in thread
From: Michael Langlott @ 2006-01-08 11:17 UTC (permalink / raw)
To: lm-sensors
Thanks for answer!
I dont know exactly witch version that is, i just can say its a IPCOP Mod
its called lmsensors_ipcop_1.4.8.tar.tar. Thats the newest version of it.
I just seen the he dedect the cpu fan and few voltage sensors. Can u tell me
what he should find all?
Sorry for my bad englsih :)
Michael
=========================
Michael Langlott
Heinrich-L?bke-Str.15
33104 Paderborn
Tel: 05254-806774
Fax: 05254-806286
E-Mail: langlott at arcor.de
ICQ: 68872313
Yahoo: michi1978pb
Homepage: http://www.mlanglott.de
=========================
----- Original Message -----
From: "Rudolf Marek" <r.marek at sh.cvut.cz>
To: "Michael Langlott" <langlott at arcor.de>
Cc: <lm-sensors at lm-sensors.org>
Sent: Sunday, January 08, 2006 10:37 AM
Subject: Re: [lm-sensors] Lmsensors and Asus CUSL2
> Michael Langlott wrote:
>> Hi,
>>
>> i using the MB Asus CUSL2 and want to use Lmsensors with it, but he dont
>> detect my chipset. Can u make support for my CHIPSET also so i can use it
>> couse its a verrygood programm!
>>
>
> CUSL2 AS99127F Asus 1 Asus 2 (CUSL2)
>
> sensors-detect should tell you. Please run it and put the output of this
> utillity somewhere if it does
> not detect the AS99127F chip.
>
> What version of lm-sensors are you using? And what kernel?
>
> Thanks,
>
> Regards
> Rudolf
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [lm-sensors] Lmsensors and Asus CUSL2
2006-01-08 8:24 [lm-sensors] Lmsensors and Asus CUSL2 Michael Langlott
2006-01-08 9:37 ` Rudolf Marek
2006-01-08 11:17 ` Michael Langlott
@ 2006-01-08 13:10 ` Rudolf Marek
2006-01-08 13:50 ` Rudolf Marek
3 siblings, 0 replies; 5+ messages in thread
From: Rudolf Marek @ 2006-01-08 13:10 UTC (permalink / raw)
To: lm-sensors
Hallo,
Jetz probiere ich es auf Deutsch sagen. Du musst drei Sachen machen:
1) sensors-detect starten
2) modprobe modules - laden
3) sensors - starten
1) Die erste Sache wird dir sagen welche Sensoren du auf deinem Motherboard hast. Bitte starte das Programm
sensors-detect und antworte alle Fragen mit Yes
Wenn das Programm verl?uft, du wirst auf dem Bildschirm sehen welche modules zu laden sind.
2) Nutz modprobe programm und lade diese modules.
3) Starte sensors programm und du solltest die Temperaturen sehen, wenn alles OK ist.
Wenn es nicht geht bitte schreibe mir wieder hier und ich m?chte dann wissen:
Die Version des lm-sensors: sensors -v
Wird es dir sagen.
Kernel version: uname -a
Dann m?chte ich die Ausgabe von sensors-detect sehen. (cut and paste)
Verzeihe mein schelchtes Deutsch :)
Danke,
Tsch?ss
Rudolf
^ permalink raw reply [flat|nested] 5+ messages in thread
* [lm-sensors] Lmsensors and Asus CUSL2
2006-01-08 8:24 [lm-sensors] Lmsensors and Asus CUSL2 Michael Langlott
` (2 preceding siblings ...)
2006-01-08 13:10 ` Rudolf Marek
@ 2006-01-08 13:50 ` Rudolf Marek
3 siblings, 0 replies; 5+ messages in thread
From: Rudolf Marek @ 2006-01-08 13:50 UTC (permalink / raw)
To: lm-sensors
> Danke f?r deine schnelle Antwort!
Kein Problemm.
> Das du wie ich sehen kann gut deutsch kannst schreibe ich jetzt auch
> einfach mal auf deutsch... ;)
>
> Also bei mir handelt es sich um die Kernel-Version : *2.4.31 #1 Sun Nov
> 6 21:51:04 GMT 2005 i686* Und bei Lmsensors um die Version: *sensors
> version 2.9.1 with libsensors version 2.9.1*
> **
> **
Danke.
> /Driver `w83781d' (should be inserted):
> Detects correctly:
> * Bus `SMBus I801 adapter at e800' (Non-I2C SMBus adapter)
> Busdriver `i2c-i801', I2C address 0x2d (and 0x48 0x49)
> Chip `Asus AS99127F (rev.1)' (confidence: 8)/
> //
> /Driver `ds1621' (may not be inserted):
> Misdetects:
> * Bus `SMBus I801 adapter at e800' (Non-I2C SMBus adapter)
> Busdriver `i2c-i801', I2C address 0x48
> Chip `Dallas Semiconductor DS1621' (confidence: 3)
> * Bus `SMBus I801 adapter at e800' (Non-I2C SMBus adapter)
> Busdriver `i2c-i801', I2C address 0x49
> Chip `Dallas Semiconductor DS1621' (confidence: 3)/
> //root at ipcop:/tmp/lmsensors/ <mailto:root at ipcop:/tmp/lmsensors>/ #/
> //
> Und wenn ich auf der IPCop oberfl?che bin und mal in das Sensoren Men?
> gehe sehe ich Folgendes:
>
> *root at ipcop : / #** show lmsensors *
>
> as99127f-i2c-0-2d
> Adapter: SMBus I801 adapter at e800
> VCore 1: +1.81 V (min = +1.66 V, max = +1.82 V)
> VCore 2: +1.81 V (min = +1.66 V, max = +1.82 V)
> +3.3V: +3.52 V (min = +3.14 V, max = +3.46 V) ALARM
> +5V: +5.06 V (min = +4.74 V, max = +5.24 V)
> +12V: +11.67 V (min = +10.83 V, max = +13.19 V)
> -12V: -12.08 V (min = -13.23 V, max = -10.73 V)
> -5V: -5.06 V (min = -5.25 V, max = -4.74 V)
> fan1: 3813 RPM (min = 0 RPM, div = 2)
> fan2: 0 RPM (min = 0 RPM, div = 2)
> fan3: 0 RPM (min = 0 RPM, div = 2)
> M/B Temp: +21 C (high = +105 C, hyst = +0 C)
> CPU Temp: -1.0 C (high = +100 C, hyst = +92 C)
> temp3: -31.5 C (high = +122 C, hyst = +121 C)
> vid: +1.750 V (VRM Version 8.2)
> alarms:
> beep_enable:
> Sound alarm enabled
>
> Weist du was ich noch machen kann?
Du kannst versuchen richtiges CPU temperatur gewinnen.
Finde diese Zeile im /etc/sensors.conf
# compute temp2 (@*30/43)+25, (@-25)*43/30
Und # weg schmeisssen so:
compute temp2 (@*30/43)+25, (@-25)*43/30
Spare die Datei.
Dann musst du sensors -s laufen und dan wieder sensors
Die CPU temperatur soll Gut sein.
Du kannst auch andere Programme die lm-sensors nutzen probieren, versuch ein bisschen googeln.
Ich hoffe es wird helfen.
Tsch?ss
Rudolf
^ permalink raw reply [flat|nested] 5+ messages in thread