[LARTC] simply limit interface bandwith

[LARTC] simply limit interface bandwith

[Daniel Netzer]

Hi there,

I am quite new to lartc and the usage of tc commands is still very 
difficult for me. All examples I have read (including the lartc.pdf) are 
way too complex for my "simple" problem.

I just need to hard limit a given interface to a bandwith (egress and 
ingress) like:

	eth0 inbound 1000kbit
	eth0 outbound 1000kbit

No priorities, just a bandwidth limitation per device.

Thanks
Daniel

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Re: [LARTC] simply limit interface bandwith

[Nickola Kolev]

[-- Attachment #1.1: Type: text/plain, Size: 619 bytes --]

Hello,

You should give the LARTC howto a look:

http://lartc.org/howto/lartc.qdisc.advice.html


On Tue, 17 Jan 2006 17:07:36 -0100
Daniel Netzer <daniel.netzer@zeroconcept.de> wrote:

> Hi there,
> 
> I am quite new to lartc and the usage of tc commands is still very 
> difficult for me. All examples I have read (including the lartc.pdf)
> are way too complex for my "simple" problem.
> 
> I just need to hard limit a given interface to a bandwith (egress and 
> ingress) like:
> 
> 	eth0 inbound 1000kbit
> 	eth0 outbound 1000kbit
> 
> No priorities, just a bandwidth limitation per device.

[-- Attachment #1.2: Type: application/pgp-signature, Size: 189 bytes --]

[-- Attachment #2: Type: text/plain, Size: 143 bytes --]

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc